• Journal of Astronomy and Space Sciences
• /
• v.22 no.4
• /
• pp.451-462
• /
• 2005

Optimal Trajectory Correction Maneuver (TCM) design algorithm has been developed using the B-plane targeting method for future Korean Mars missions. For every-mission phase, trajectory informations can also be obtained using this developed algorithms which are essential to design optimal TCM strategy. The information were computed under minimum requiring perturbations to design Mars missions. Spacecraft can not be reached at designed aim point because of unexpected trajectory errors, caused by many perturbations and errors due to operating impulsive maneuvers during the cruising phase of missions. To maintain spacecraft's appropriate trajectory and deliver it to the designed aim point, B-plane targeting techniques are needed. A software NPSOL is used to solve this optimization problem, with the performance index of minimizing total amount of TCM's magnitude. And also executing time of maneuvers on be controlled for the user defined maneuver number $(1\~5)$ of TCMs. The constraints, the Mars arrival B-plane boundary conditions, are formulated for the problem. Results of this work show the ability to design and analyze overall Mars missions, from the Earth launch phase to Mars arrival phase including capture orbit status for future Korean Mars missions

• Journal of Aerospace System Engineering
• /
• v.13 no.3
• /
• pp.23-31
• /
• 2019

The design requirements of modern satellites vary depending on the purpose of operation. Like conventional medium and large-scale satellites, small satellites which operate on low orbit may also serve military purposes. As a result, there is increased demand for high-resolution photos and videos and multi-target observation becomes important. The most important design parameter for multi-target observation is the satellites' maneuverability. For increased maneuverability, the miniaturization is required to increase the stiffness of the satellite as this decreases the mass moment of inertia of the satellite. In the case of a solar panel having relatively low stiffness compared to the satellites' body, vibrations are generated when the attitude maneuver is performed, which greatly influences the image acquisition. For verification of such vibrational characteristics, the satellites is modeled as a reduced model, and experimental zig for simulating attitude maneuver is introduced. A rigidity simulator for simulating the stiffness of the satellite is also proposed. Additionally, the objective of the experimental method is to simulate the maneuvering angle of the satellite based on the winding length of the wire using a step motor, and to experimentally verify the vibration characteristics of the satellite body and the solar panel generated during the maneuvering test.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.32 no.6
• /
• pp.72-80
• /
• 2004

In this paper, the design procedure of a guidance algorithm in the boosting phase of missiles with free-flight after thrust cut-off is introduced. The purpose of the guidance is to achieve a required velocity vector at the thrust cut-off. Trajectory optimizations for four cost functions are performed to investigate implementable trajectories in the pitch plane. It is observed from the optimization results that high angle of attack maneuver in the beginning of the flight are required to satisfy the constraints. The proposed guidance algorithm consists of the pitch program to produce open-loop pitch attitude command and the yaw attitude command generator to nullify the velocity to go. The pitch program utilizes the pitch attitude histories obtained from the trajectory optimization.

• Journal of Advanced Navigation Technology
• /
• v.16 no.2
• /
• pp.197-203
• /
• 2012

In this paper, study the substantial issues which occurs upon free flight environment by performing separation assurance under multiple conflict(over 3 Aircraft), recovery en route under the terms of time constrains and fixed way point after the conflict avoidance, correlations between conflict detection distance and separation assurance by utilizing Autonomous flight algorithm. Result of this experiment demonstrates that the extension of detection distance is advantageous to solution of separation assurance and enhancing of flight efficiency, choose to maneuver by applying time constrain terms and fixed way point according to the situation of conflict prediction in case of recovery maneuver after the conflict avoidance. And separation assurance can be solved by applying 2 degrees or more of bank angle. When choosing the optimal bank angle could be drastically improved flight efficiency.

• The Bulletin of The Korean Astronomical Society
• /
• v.37 no.2
• /
• pp.191.2-191.2
• /
• 2012

저궤도 위성을 설계함에 있어 시스템 수준에서 수행하는 질량특성의 계산은 위성을 구성하는 각각의 구성품에 대한 정보를 종합하여 전체 시스템의 특성을 예측하는 작업이다. 질량특성에 대한 요구조건은 발사체로부터 설정되는데 요구조건 항목은 탑재체질량, 무게중심 그리고 관성모멘트에 관한 것이다 또한, 자세제어면에서 추력에 의한 토크에 따른 무게 중심 등이며 최근 위성의 고기동화 요구에 따라 기동요구조건 및 자세구동장치의 용량에 따라 결정된다. 특히 위성의 궤도형상 관성모멘트는 위성 동특성을 표시하므로 이를 사용하여 제어시뮬레이션을 수행하는 자세제어계에 주요 입력 데이터로 활용된다. 본 논문에서는 저궤도 위성의 질량특성 요구조건을 검증하기 위해 수행한 질량특성 예측과 질량특성 측정 시험에 대해서 기술하고자 한다.

• Proceedings of the KIEE Conference
• /
• 2008.04c
• /
• pp.13-15
• /
• 2008

본 논문은 대형(MW 급) LNG 전기추진선박 시스템의 동적 정적 특성에 대해 다룬다. 특히, 선박 항해시와 LNG Unloading시에 대해 전력조류해석(정특성 해석)으로 시스템 모델링의 타당성을 검증하였다. 아울러, LNG Unloading에 대한 Cargo Pump 기동시 시스템의 전압변동률 및 발전기의 주파수(속도)변화를 관찰하였으며, PID제어기로 구성된 발전기 Governor의 파라미터를 설계하기 위해 실제 항해시 발생할 수 있는 몇 가지 상황(발전기 및 추진전동기 Trip)의 과도안정도해석을 수행하였다. 따라서 전동기 기동해석 및 과도안정도해석(동특성 해석)으로 발전기 및 추진전동기의 전압안정성을 관찰하였다.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.10 no.6
• /
• pp.959-965
• /
• 1986

본 논문에서는 모듀울 로봇은 공장 자동화를 달성하기 위한 경제적인 방법으 로 기대되고 있다. 모듀울 로봇을 구성하는 모듀울을 개발 설계하기 위해서는 먼저 유용한 로봇을 기본 구조를 연구하여야 한다. 일반적으로 로봇의 처음 3개의 관절은 로봇 손의 위치를 결정하는 데 쓰이고 나머지 관절은 로(positional maneuverability matrix)과 방향기동행열로 구성됨음을 보이고, 가분성(separability)의 조건을 제시하 였다.또한 희전관절이나 미끄름관절로 이루어진 3자유도 로봇 팔의 3차원 공간에서 의 기본형태는 12개임을 밝히고, 3자유도 손목이 3개 방향을 완전히 조정할 수 있기 위해서는 3개의 회전관절축이 서로 직교하여야 함을 보였다.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.42 no.2
• /
• pp.173-180
• /
• 2014

In this paper, the instrument flight certification process and flight test results of Korean Utility Helicopter (KUH) are presented. For the instrument flight certification, the suitability of installed equipments and instruments have been reviewed and verified by ground and flight tests. Next, static and dynamic stability test are conducted in accordance with FAR-29 Appendix B. The static stability is determined by the change of speed and attitude according to control inputs. The dynamic stability is evaluated by how quickly the response of the helicopter due to long and short period control inputs are decreased. The pilot workload evaluation are also carried out by simulated IMC flight tests. This paper presents the workload assessment results when some failures are occurred at cockpit instruments, engine or flight control systems as well as the normal situation. After the simulated IMC flight test is completed, actual instrument flight test are conducted in a real IMC environment according to the air traffic controls.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.46 no.8
• /
• pp.639-651
• /
• 2018

An analytical solution to generate attitude command profile for agile spacecraft is proposed. In realistic environment, obtaining analytical minimum-time optimal solution is very difficult because of following constraints-: 1) actuator saturation, 2) flexible mode excitation, 3) uplink command bandwidth limit. For that reasons, this paper applies two simplifications, an eigen-axis rotation and a finite-jerk approximated profile, to derive the solution in an analytical manner. The resulting attitude profile can be used as a feedforward or reference input to on-board attitude controller, and it can enhance spacecraft agility. Equations of attitude command profile are derived in two general boundary conditions: rest-to-rest maneuver and spin-to-spin maneuver. Simulation results demonstrate that the initial and final boundary conditions, in terms of time, attitude, and angular velocities, are well satisfied with the proposed analytical solution. The derived attitude command generation algorithm may be used to minimize a number of parameters to be uploaded to spacecraft or to automate a sequence of attitude command generation on-board.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.18 no.2
• /
• pp.27-34
• /
• 2014

Buzz margin scheduling and control technique which are suitable to regulate stable and high pressure air in wide range of Mach number are suggested for fixed geometry of a supersonic intake. From the analysis of preceding study, most effective control variable is induced and scheduling law is newly suggested in a real application point of view. The appropriateness of the control law in wide range of Mach number is addressed by numerical simulation of controlled propulsion system. Also, the simulation for stabilization and tracking performances of the controller are studied to investigate the phenomena under flight maneuver and disturbances.