• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.6
• /
• pp.2722-2728
• /
• 2011

3Phase PWM rectifier has become increasingly popular due to its capability of nearly sinusoidal waveform of the input current, and nearly unity power factor operation as a AC/DC rectifier of high capacity telecommunication power supply system. Generally, PI controller is used as a voltage controller of PWM rectifier and voltage controller must be designed to have low overshoot in transient state to get a reliability and stable operation. However, in the application of telecommunication in which load condition is varied very fast, the voltage controller must have a large bandwidth to reduce output voltage variation. The PI controller with large bandwidth arouse the excessive overshoot of the output voltage, and this large output voltage variation degrades the reliability of communication power of the three-phase PWM Rectifier. In this paper, new IP voltage controller for 3 phase PWM rectifier is proposed which has relatively low transient output voltage variation. The improved output characteristics of the transient state voltage responses of the starting and at load changes of the proposed voltage controller are proved by simulations and experiments.

• Journal of Veterinary Clinics
• /
• v.18 no.4
• /
• pp.418-423
• /
• 2001

To investigate the modulation of nerve growth factor (NGF) during corneal epithelial wound healing and the effect of topical NGF on corneal epithelial wound healing in dogs. An axial epithelial defect was created in the right eye using 6mm axial corneal mechanical debridement while the left served as an unwounded control. The tears were collected from both eyes during 1 week and the corneal epithelium was processed for the measurement of NGF at day 0 and 7. The NGF content of tears and corneal epithelium was determined by enzyme-linked immunosorbent assay. In another experiment, the animals were divided into 3 groups. The right eyes in each group were treated every six hours with 200 ug/ml of recombinant human (rh) NGF, murine NGF, or 600 ug/ml of anti-NGF blocking antibody. The left eye of each animal was treated with bovine serum albumin (BSA) to serve as controls. Wound healing was analyzed using NIH image software. Tear NGF was markedly increased in the wounded eyes, relative to tears from control eyes during the early healing period. The NGF content of the corneal epithelium was elevated in the wounded eye (p=0.024). Time to wound closure and rate of epithelial migration were not significantly different between the NGF treated or the NGF antibody treated, and the control BSA treated eyes. Corneal epithelial wounding increased NGF content only on the wounded side during the early healing period. Neither topical recombinant human or murine NGF affected corneal epithelial wound healing in the normal dog.

• Proceedings of the KWS Conference
• /
• 2009.11a
• /
• pp.12-12
• /
• 2009

터빈에서 핵심부품인 로터는 블레이드를 원심 운동시키는 대형 단조강이며, 고압의 증기 조건에서 고속회전하며 고온에서 운전과 저온에서 과속시험 동안 높은 원심력을 받는다. 또한 기동/정지 천이 동안 열응력을 받기 때문에, 이러한 운전조건에 부합되는 소재로서는 높은 Creep 강도 및 피로강도를 가지는 CrMoV type의 강종이 사용되어져 왔다. 발전소의 대용량화 및 고온화에 따라 종래의 증기조건에서 사용되어져 왔던 1%CrMoV강은 내산화성 및 내부식성이 문제가 되어 더 이상 사용이 불가하며, 고온/고압하에서도 우수한 소재 특성을 가지는 12%Cr강의 사용이 필수적이다. 그러나 12%Cr강으로 제작되는 로타는 Cr 양이 높기 때문에 저널부에 Galling 또는 Scuffing 이라 불리는 부적절한 마모현상과 사용 중 소착이 발생하기 쉬운 단점이 있기 때문에, 저널부에 Cr 함유량 2~3% 이하의 저합금강을 오버레이 용접하여 육성하는 일체형 가공구조의 로타 저널부가 주목되어 왔다. 따라서 본 연구에서는 Large scale 로타가 용접 도중 급열 및 급냉이 되지 않으면서 균일한 온도로 일정 시간 유지할 수 있는 열관리 장치 개발, 최적 오버레이 용접조건 선정 및 용접부 건전성 시험 평가를 통하여 12%Cr 로타 저널부의 최적 오버레이 용접공정을 확립하고자 하였다. 용접 열관리 장치는 전기저항 가열방식을 적용하고 있으며 용접이 최종 완료되기 전까지 로타 제품 전체는 $93^{\circ}C$이상의 온도로 유지 되어져야 하며, 규정 용접후열처리 온도는 $650^{\circ}C{\pm}14^{\circ}C$ 이다. 또한 로타 오버레이 용접은 모재 Set up $\Rightarrow$ 용접예열 $\Rightarrow$ GTA용접 $\Rightarrow$ SA용접 $\Rightarrow$ 용접후열(Post heating) $\Rightarrow$ 용접후열처리(PWHT) $\Rightarrow$ 정삭가공 $\Rightarrow$ NDE(UT) 순으로 수행 되어진다 실제 로타의 1/3 Scale로 시험편을 제작하여, 오버레이 mockup 시험을 수행한 후 화학성분, 경도 분포, 인장강도, 충격인성 및 굽힘시험을 수행한 결과, 오버레이 용접에서 요구되어지는 용접 물성값을 만족하는 것으로 확인되었다. 또한 균열 등의 선형 결함이나 기공, 슬라그 혼입과 같은 결함은 관찰되지 않았으며, 용접 시 아크의 안정성과 슬라그의 박리성은 양호하였으며 비드의 외관도 미려하여 용접 작업성도 양호하였다.

• Journal of the Society of Naval Architects of Korea
• /
• v.30 no.1
• /
• pp.125-133
• /
• 1993

Most studies on the vibration analysis of a beam-column with ends elastically restrained and various intermediate constraints have been based on the Euler beam theory, which is inadequate for beam-columns of low slenderness ratios. In this paper, analytical methods for vibration and dynamic sensitivity of a Timoshenko beam-column with ends elastically restrained and various intermediate constraints are presented. Firstly, an exact solution method is shown. Since the exact method requires considerable computational effort, a Rayleigh-Ritz analysis is also investigated. In the latter two kinds of trial functions are examined for comparisions : eigenfunctions of the base system(the system without intermediate constraints) and polynomials having properties corresponding to the eigenfunctions of the base system. The results of some numerical Investigations show that the Rayleigh-Ritz analysis using the characteristic polynomials is competitive with the exact solutions in accuracy, and that it is much more efficient in computations than using the eigenfunctions of the base system, especially in the dynamic sensitivity analysis. In addition, the prediction of the changes of natural frequencies due to the changes of design variables based on the first order sensitivity is in good agreements with that by the ordinary reanalysis as long as the changes of design variables are moderate.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.15 no.1
• /
• pp.99-118
• /
• 2012

The aim of this study is to define a correlation between spatial distribution characteristics of FFG(Functional Feeding Groups) of aquatic insects and related environmental factors in the Geum River based on the theory of RCC(River Continuum Concept). For that objective we had used SMRA(Stepwise Multiple Regression Analysis) method to analyze close relationship between the distribution of aquatic insects and the physical and chemical factors that may affect their inhabiting environment in the study area. And then, a probabilistic method named Frequency Ratio Model(FRM) and spatial analysis function of GIS were applied to produce a predictive distribution map of biota community considering their distribution characteristics according to the environmental factors as related variables. As a result of SMRA, the values of decision coefficient for factors of elevation, stream width, flow velocity, conductivity, temperature and percentage of sand showed higher than 0.5. Therefore these 6 environmental factors were considered as major factors that might affect the distribution characteristics of aquatic insects. Finally, we had calculated RMSE(Root Mean Square Error) between the predicted distribution map and prior survey database from other researches to verify the result of this study. The values of RMSE were calculated from 0.1892 to 0.4242 according to each FFG so we could find out a high reliability of this study. The results of this study might be used to develop a new estimation method for aquatic ecosystem with macro invertebrate community and also be used as preliminary data for conservation and restoration of stream habitats.

• Korean journal of applied entomology
• /
• v.21 no.3 s.52
• /
• pp.113-122
• /
• 1982

Appressorial formation of Pyricularia oryzae on leaves showed no marked difference between highly resistant Tongil and susceptible Norm No. 6. Race N-2 of the blast fungus penetrated directly into motor cells of susceptible cultivar Norm No. 6, later extensively spreading hyphae were developed, while in the cultivar Tongil, after penetration, no further hyphal extension resulted. In discoloration of infected tissues, the highly resistant cultivar Tongil not only discolored rapidly, but also the percentage of discolored cells was higher than the susceptible cultivars, Jinheung and Norm No. 6. The respiratory rate, was generally higher in infected tissue than in healthy tissue. No significant difference in the respiration rate of resistant Suwon No. 180 was not found between the infected and healthy leaf tissue, whereas, in susceptible Jinheung, a marked increase in respiratory rate was caused by blast infection. The respiratory rate increased at the appearance of the first visible symptom in all cultivars resistant or susceptible. Higher peroxidase activity was found in infected tissues as compared with healthy tissue. Peroxidase activity increased in resistant and susceptible reactions. Particularly, in resistant reaction, the increase of the activity was more pronounced. In highly resistant reaction, there was no difference in peroxidase activity between healthy and infected tissues. Ascorbic acid oxidase, hydroquinone oxidase and catechol oxidase had the same trend as the peroxidase. In contrast, activity of catalase rather decreased in leaf tissues infected with compatible races of the fungus.

• Proceedings of the Korean Vacuum Society Conference
• /
• 1999.07a
• /
• pp.190-190
• /
• 1999

박막 표면에 대한 경원소 분석법인 탄성 되튐 반도법을 개발하여 수소, 탄소, 질소등 분석에 이용하고 있다. 이때 입사 입자로 Cl 9.6MeV를 이용하였는데, 표적 표면에 탄소막이 흡착되는 현상을 발견하였다. cold trap 및 cold finger를 사용하여 진공도를 개선하므로서, 탄소막 흡착의 한 원인으로 알려져 잇는 chamber 주변의 진공도 변화를 시켜보았다. 하지만 전혀 탄소막이 생기지 않는 10-10torr 이하 진공을 만드는 것은 많은 비용과 장비를 필요로 하는 상당히 힘든 작업이어서, 이차적으로 탄소막이 표적 표면에 달라 붙게 하는 원인으로 추정되는 이차 전자의 발생을 고에너지 이온빔으로 조사하였다. 일반적으로 이차전자의 발생은 이온빔과 표적과의 충돌에 의한 고체 표면으로부터의 전자방출 현상으로 오래전부터 연구되어져 왔다. 여기에는 두가지 다른 구조가 존재하는 것으로 알려져 있다. 그 중 하나는 입사 입자의 전하와 표적 표면사이 작용하는 potential 에너지가 표적 표면의 일함수(재가 function) 보다 클 때에 일어나는 potential emission이다. 즉 표적 궤도에 존재하는 전자와 입사 이온빔 사이의 potential 이 표적의 전자를 들뜨게 만들고, 이 potential의 크기가표적의 표면 장벽 potential 보다 충분히 클 뜸 전자가 방출하는 현상을 말한다. 다른 또 하나의 방출구조로는 입사 이온이 표적 표면의 원자와의 충돌에 의해 직접저인 에너지 전달을 통한 전자 방출을 말하는데, 이를 kienetic emission(이하 KE)이라 한다. 본 연구에서는 Tandem Van de graaff 가속기로 고에너지 이온빔을 만들어 Au에 충돌시키므로서 kinetic emission을 통하여 Au에서 발생한는 이차전자의 방출 수율 및 에너지를 측정하였다.장구조로 전체 성장 양식을 예견할 수 있다. 일반적인 경향은 Ep가 커질수록 fractal 성장형태가 되며, Ed가 적을수록 cluster 밀도가 작아지나, 같은 Ed+Ep에 대해서는 동일한 크기의 팔 넓이(수평 수직 방향 cluster 두께)를 가진다. 따라서 실험으로부터 얻은 cluster의 팔 넓이로부터 Ed+Ep 값을 결정할 수 있고, cluster 밀도와 fractal 차원으로부터 각각 Ed와 Ep값을 분리하여 얻을 수 있다. 또한 다층 성장에 대한 거칠기(roughness) 값으로부터 Es값도 구할 수 있다. 양방향 대칭성을 갖지 않은 fcc(110) 표면과 같은 경우, 형태는 다양하지만 동일한 방법으로 추정이 가능하다. (110) 표면의 경우 nearest neighbor 원자가 한 축으로 형성되고 따라서 이 축과 이것과 수직인 축에 대한 상호작용이나 분산 장벽 모두가 비대칭적이다. 따라서 분산 장벽도 x-축, y-축 방향에 따라 분리하여 Edx, E요, Epx, Epy 등과 같이 방향에 따라 다르게 고려해야 한다. 이러한 비대칭적인 분산 장벽을 고려하여 KMC 시뮬레이션을 수행하면 수평축과 수직축의 분산 장벽의 비에 따라 cluster의 두께비가 달라지는 성장을 볼 수 있었고, 한 축 방향으로의 팔 넓이는 fcc(100) 표면의 경우 동일한 Ed+Ep값에 대응하는 팔 넓이와 거의 동일한 결과가 나타나는 것을 볼 수 있다. 따라서 이러한 비대칭적인 모양을 가지는 성장의 경우도 cluster 밀도, cluster 모양, cluster의 양 축 방향 길이 비, 양 축 방향의 평균 팔 넓이로부터 각 축 방향의 분산 장벽을 얻어낼 수 있을 것으로 보인다. 기대할 수 있는 여러 장점들을 보고하고자 한다.성이 우수한 시편일수록 grain의 크기가 큰 것으로 나타났고 결정성이 우수한 시편의 경우에서는 XR

• Journal of Digital Convergence
• /
• v.20 no.1
• /
• pp.191-202
• /
• 2022

The purpose of this study is to examine the effect of a 10-week body stability exercise program, which was conducted on 24 male football players. The result of the Visual Response Speed Test using BlazePod, showed a significant increase of the upper arms, left foot and right foot for 15 second in number of reactions and reaction time (p<0.001). As a result of evaluating whether or not 7 functional movements were improved in order to evaluate the functional movement screen, Hurdle Step (p=0.001) and Active Straight Leg Rise (p=0.022) movements were significantly improved. significantly improved. As a result of measuring the y-balance Test in order to evaluate the balance ability, composite score(p<0.001) of both sides was significantly improved. The result of evaluating vital capacity, which was conducted to evaluate mobility and muscle endurance, showed a significant improvement in Forced vital capacity(p<0.001) and Forced expiratory volume in 1.0(p=0.003). In conclusion, a 10-week BSE program intervention in high school period, which can most improve the technical fitness necessary for the game in power, agility, leg strength, leg stability, mobility, and muscle endurance, will improve overall technical fitness, prevent football players from being injured and enhance their performance.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.23 no.8
• /
• pp.759-769
• /
• 2013

Electronic equipment has been applied to virtually every area associated with commercial, industrial, and military applications. Specifically, electronics have been incorporated into avionics components installed in aircraft. This equipment is exposed to dynamic loads such as vibration, shock, and acceleration. Especially, avionics components installed in a helicopter are subjected to simultaneous sine and random base excitations. These are denoted as sine on random vibrations according to MIL-STD-810F, Method 514.5. In the past, isolators have been applied to avionics components to reduce vibration and shock. However, an isolator applied to an avionics component installed in a helicopter can amplify the vibration magnitude, and damage the chassis, circuit card assembly, and the isolator itself via resonance at low-frequency sinusoidal vibrations. The objective of this study is to investigate the dynamic characteristics of an avionics component installed in a helicopter and the structural dynamic modification of its tray plate without an isolator using both a finite element analysis and experiments. The structure is optimized by dynamic loads that are selected by comparing the vibration, shock, and acceleration loads using vibration and shock response spectra. A finite element model(FEM) was constructed using a simplified geometry and valid element types that reflect the dynamic characteristics. The FEM was verified by an experimental modal analysis. Design parameters were extracted and selected to modify the structural dynamics using topology optimization, and design of experiments(DOE). A prototype of a modified model was constructed and its feasibility was evaluated using an FEM and a performance test.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.6 no.2
• /
• pp.107-117
• /
• 2004

If doubtlessly contributes much to agriculture and rural development. The roles can be summarized as; 1. to activate rural areas and to provide more comfortable and safe rural life with equivalent services to those in urban areas, facilitating distance education, tole-medicine, remote public services, remote entertainment etc. 2. To initiate new agricultural and rural business such as e-commerce, real estate business for satellite officies, rural tourism and virtual corporation of small-scale farms. 3. To support policy-making and evaluation on optimal farm production, disaster management, effective agro-environmental resource management etc., providing tools such as GIS. 4. To improve farm management and farming technologies by efficient farm management, risk management, effective information or knowledge transfer etc., realizing competitive and sustainable farming with safe products. 5. To provide systems and tools to secure food traceability and reliability that has been an emerging issue concerning farm products since serious contamination such as BSE and chicken flu was detected. 6. To take an important and key role for industrialization of farming or lam business enterprise, combining the above roles.