• The Journal of the Korea Contents Association
• /
• v.11 no.7
• /
• pp.387-405
• /
• 2011

A local government is not a group under central government, rather it fulfills the function independently as a economic social administrative unit. Belief and role of chief of regional government, and citizen's understanding and interest regarding importance of an election pledge are getting higher. Thus, this study researches election pledges which can be a main variable of urban plan. Especially, the study attempts to analyze impacts of election pledge on urban spatial structure and regional economic structure. When relationship between election pledge and Use Zoninig change were analyzed, the result showed that development related entire use Use Zoninig changes were related with election pledge. When it was subdivided according to each use area, relationship of use area change among election pledge and urban spatial structure found to have relatively high in resident area. In addition, relationship between population factor and election pledge was high. This can be judged as election pledge and urban spatial structure change have relationship. Particularly, sectors related with residents are expected to have high correlation. As a result, pledges regarding general welfare administrative part were a few at areas with many pledges regarding regional economic development. So, it can be classified as regional economic development oriented pledge suggesting area and welfare administrative oriented suggesting area. Through realization of these pledges, it might be able to affect urban spatial structure changes.

• Proceedings of the Korean Institute Of Construction Engineering and Management
• /
• autumn
• /
• pp.529-532
• /
• 2003

Efficiency and efficient management on maintenance/repair/operation (MRO) phase is getting important with advance in technologies and complex functionalities of building and facility. Using software systems as well as advanced hardware systems in MRO area is spreading along with this trend to take advantage of information technology. Information of building and facility for MRO phase is derived from engineering/procurement/construction (EPC) phase. But most current commercial software systems in EPC and MRO are focusing on their own phase, which arise lack of consistency of information from EPC to MRO phase. But, the information system now used at the MRO phase stop flowing the building and the facilities information and then newly create. Moreover, from all asset management point of view, asset particulars such as the structures and equipments are different the value fluctuation. In order to reflect these information rationally, the construction costs are correctly distributed and the initial price of the asset particulars have to be estimated. In this study, develop the information model which can apply the cost information at the EPC phase to the MRO phase.

• Korean Journal of Construction Engineering and Management
• /
• v.5 no.1 s.17
• /
• pp.99-106
• /
• 2004

Efficiency and efficient management on maintenance/repair/operation (MRO) phase is getting important with advance in technologies and complex functionalities of building and facility, Using software systems as well as advanced hardware systems in MRO area is spreading along with this trend to take advantage of information technology. Information of building and facility for MRO phase is derived from engineering/procurement/construction (EPC) phase. But most current commercial software systems in EPC and MRO are focusing on their own phase, which arise lack of consistency of information from EPC to MRO phase. But, the information system now used at the MRO phase stop flowing the building and the facilities information and then newly create. Moreover, from an asset management point of view, asset particulars such as the structures and equipments are different the value fluctuation. In order to reflect these information rationally, the construction costs are correctly distributed and the initial price of the asset particulars have to be estimated. In this study, develop the information model which can apply the cost information at the EPC phase to the MRO phase.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.27 no.4
• /
• pp.321-329
• /
• 2001

To establish systematic diagnosis and treatment planning of dentofacial deformity patient including facial asymmetry or hemifacial microsomia patient, comprehensive analysis of three dimensional structure of the craniofacial skeleton is needed. Even though three dimensional CT has been developed, landmark identification of the CT is still questionable. In recent, a method for correcting cephalic malpositioning that enables accurate superimposition of the landmarks in different stages without using any additional equipment was developed. It became possible to compare the three-dimensional positional change of the maxillomandible without invasive procedure. Based on the principle of the method, a new program was developed for the purpose of diagnosis and treatment planning of dentofacial deformity patient via three dimensional visualization and structural analysis. This program enables us to perform following menu. First, visualization of three dimensional structure of the craniofacial skeleton with wire frame model which was made from the landmarks observed on both lateral and frontal cephalogram. Second, establishment of midsagittal plane of the face three dimensionally, with the concept of "the plane of the best-fit". Third, examination of the degree of deviation and direction of deformity of structure to the reference plane for the purpose of establishing surgical planning. Fourth, simulation of expected postoperative result by various image operation such as mirroring, overlapping.

• Journal of Intelligence and Information Systems
• /
• v.11 no.1
• /
• pp.35-51
• /
• 2005

The wide spread of Internet and rapid development of e-commerce-related technology have brought sweeping changes on the traditional commercial transactions. Accordingly, many efforts to transform these transactions electronically under e-commerce environment have been carried out. As most transactions are usually made through negotiations, the function of automated negotiation is also required in the e-commerce environment. This paper aims to develop the method to generate and evaluate the multi-attribute negotiation proposals for automated negotiation systems. To this end the related articles are reviewed and the method dealing with e-negotiation strategy is suggested. In this method, the seller generates his or her own negotiation proposal and then evaluates the buyer's proposal based on SAW (Simple Additive Weighting Method), one of the MADM (Multi Attribute Decision Making) methods. To verify the suggested method, a case study is conducted in the order-based manufacturing environment.

• Korean Journal of Microbiology
• /
• v.39 no.1
• /
• pp.8-15
• /
• 2003

To evaluate the effects of slow release fertilizer and chemical dispersant on oil biodegradation, mesocosm studies were conducted on sand seashore. The rapid removal rates (85%) of aliphatic hydrocarbons and the simultaneous decreases of n-$C_{17}$/pristane (69%) and $n-C_{18}/phytane$ (61%) ratios by the addition of slow-release fertilizer (SRF) within 37 days of experiment indicated that SRF could enhance the oil degrading activity of indigenous microorganisms in sand mesocosm. Although the growth of heterotrophic bacteria and petroleumdegrading bacteria in the mesocosm treated with $Corexit 9527^{R}$ was stimulated, the biological oil removal based on the ratios of $Corexit 9527^{R}$ and $n-C_{18}/phytane$ was inhibited. Removal rates of aliphatic hydrocarbons (56%), and n-$C_{17}$/pristane (27%) and $n-C_{18}/phytane$ (17%) ratios by the addition of chemical dispersant $Corexit 9527^{R}$ were similar or lower than those values of control (50, 60, 46%), respectively. The biodegradation activity, however, when simultaneously treated with SRF and $Corexit 9527^{R}$, was not highly inhibited and even recovered after the elimination of chemical dispersant. From these results it could be concluded that the addition of SRF enhanced the oil removal rate in oligotrophic sand seashore and chemical dispersant possibly inhibit the oil biodegradation. Hence, in order to prevent the unrestrained usage of chemical dispersant in natural environments contaminated with oil, the National Contingency Plan of Oil Spill Response should be carefully revised in consideration of the application for bioremedaition techniques.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.48 no.5
• /
• pp.42-58
• /
• 2020

The purpose of this study is to classify types of urban flower landscape. As a result of the study, first, through literature and case review, it was found that the four elements of place element, form element, natural element, artificial element, should be included in the sentence and key expression for defining the concept of flower landscape. In contemplating these four elements, a newly reconstructed concept of flower landscape was presented. This is expected to be the basis for the flower landscape integration theory. Second, flower landscape was defined as a genre and a unit of urban landscape. In addition, in order to build a system of flower landscape as a specialized area, after considering the concept, characteristics, and functions of a large category of urban landscape, its hierarchical categories with flower landscape were newly arranged. Thus, the flower landscape as an urban landscape was suggested. Third, in order to provide rational selection materials to consumers through type classification, related theories were investigated by expanding not only to the flower field, but also to the urban planning and urban ecology fields. 41 elements for the type classification were extracted, and 4 core elements were derived through the clustering process. Based on the 4 elements as the classification criteria, through the opinion verification from the FGI with experts, 9 types of middle-classification and 30 types of small-classification were derived. As a follow-up research suggestion, if a valid type is additionally established through a monitoring in the type application process, and more specified application types are developed and organized by expanding second-level classification hierarchy to the third-level hierarchy, this will lead to great studies improving the system of the types.

• KIPS Transactions on Software and Data Engineering
• /
• v.4 no.3
• /
• pp.99-110
• /
• 2015

Internet-of-Things(IoT) is the computing paradigm converged with different technologies, where diverse devices are connected via the wireless network, acquire environmental information from their equipped sensors, and actuated. IoT applications typically provide smart services to users by interacting with multiple devices connected to the network and are designed by integrating multiple technologies such as sensor network, communication technologies, and software engineering. Moreover, since the concept of IoT has been introduced recently, most of the researches are in the beginning step, which is too early to be practically applied. Due to these facts, developing IoT application results in unconventional technical challenges which have not been observed in typical software applications. And, it is not straightforward to apply conventional project guidelines to IoT application development projects. Hence, there can be many difficulties to successfully complete the projects. Therefore, for successful completion of the projects, we analyze technical challenges occurring in all phases of the project lifecycle, i.e. project preparation stage and development stage. And, we propose the effective solutions to overcome the issues. To verify identified issues and presented solutions, we present the result of applying the solutions to an IoT application development. Through the case study, we evaluate how reasonable the unconventional technical issues are generated and analyze effectiveness of applying the solutions to the application.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.1
• /
• pp.762-768
• /
• 2015

This study examined the integration value of a low level pilotis space, a component that has been often selected as an essential planning element of the recent high-rise apartment complex, and compared the main outdoor unit spaces with that of an average integration value of the individual complexes. Furthermore, this study provided the preliminary data for the next level of research, which is the observation of the pilotis space usage behaviors and the frequency of utilization. The results of this present research are as follows. First, from the main outdoor unit spaces of the high-rise apartment complexes including the pilotis space, a 'complex entrance' or a 'plaza' space showed the highest integration value. Second, the spatial integration value of a pilotis space in a high-rise apartment complex was generally lower that of the integration value of other main outdoor units. Third, from the pilotis spaces of the high-rise apartment complex, those with a 'projecting entry access + pilotis addition type' that did not provide an access to the individual units, had the lowest space utilization rate by the inhabitants; thus, had a high likelihood of the spaces becoming used for illegitimate activities or becoming vacant.

• Archives of design research
• /
• v.18 no.1 s.59
• /
• pp.135-144
• /
• 2005

Consumers' awareness of product value, and their product preferences, are becoming increasingly influential in product development, particularly in corporations' efforts in manufacturing products with a competitive edge. Corporations conduct surveys on consumers' product satisfaction and preferences and conduct in-depth studies on consumer needs. They then manufacture products in accordance with the results of these surveys and studies. With the necessity and demand for digital door lock products recently growing, this research sought to explore product competitiveness reinforcement factors that could facilitate market penetration, and to formulate corresponding design strategies. In-depth consumer interviews were also conducted to identify consumer lifestyles and needs. Furthermore, consumer preference images, purchase and use-related patterns, and the status of door lock markets were studied. In the past, to design and manufacture consumer-oriented products, corporations primarily resorted to the improvement of the products' technological features. At present, the users' product preferences and the ways that they use these products are the factors that determine product design. Consumers today tend to adjust their lifestyles according to available products, and prefer products that have greater value in terms of lifestyle and culture. Strategic points for reinforcing competitiveness were presented in this study: first, offering different values that will enhance consumer satisfaction, second, positively developing bio-recognizable methods that will boost consumer preference, third, meeting the consumers' expectations that door lock products should not be mere 'entrance and exit control' systems, but network security systems and fourth, adopting convenient authentication methods backed by advanced technologies.