• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.34 no.2
• /
• pp.687-697
• /
• 2014

This study ranges from planning phase to the detailed design phase of steel box girder bridge and proposes ways to generate semantic information of components through Industry Foundation Classes (IFC), a data model for Building Information Modeling (BIM). The classification of components of steel box girder bridge was performed to define information items required for identifying semantic information based on IFC, and spatial information items based on topology and physical information items based on functions of components were classified to create additional properties that does not support IFC by applying user-defined property set within the IFC framework. Steel box girder bridge information model based on IFC was implemented through BIM software and semantic information input interface, which was developed in this study to examine the effectiveness of the additionally created user-defined property. Furthermore, the quantity take-off of components was performed through information model of steel box girder bridge, and the applicability of the proposed method was tested by comparing the quantity take-off based on design document with the result.

• Journal of the East Asian Society of Dietary Life
• /
• v.21 no.5
• /
• pp.713-722
• /
• 2011

This study was conducted to monitor the quality characteristics of Acai (Euterpe oleracea Mart.) ethanolic extracts by a response surface methodology. The independent variables in the extraction experiments were ethanol concentration (0~100%), extraction temperature ($35{\sim}95^{\circ}C$), and ratio of solvent to sample (10~30 mL/g). The coefficients of determinations ($R^2$) were 0.9596 (p<0.01), 0.9356 (p<0.01), and 0.8842 (p<0.05) for total polyphenol, total flavonoid, and electron donating ability, respectively. The electron donating ability and nitrite scavenging effect improved with an increase in ethanol concentration as opposed to extraction temperature. Anthocyanin content with extraction conditions was 74.421~291.841 mg/L and the coefficient of determinations ($R^2$) was 0.9792 (p<0.01). ORAC (oxygen radical absorbance capacity) with extraction conditions was 137.73~562.94 ${\mu}moles$ TE/g and increased with an increase in ethanol concentration and a decrease in the ratio of solvent to sample content. Estimated conditions for maximum extraction including yield, total polyphenol, total flavonoid, electron donating ability, anthocyanin content, and ORAC were 28~58% for ethanol concentration, $60{\sim}68^{\circ}C$ for extraction temperature, and 10~12 mL/g for ratio of solvent to sample.

• Korean Journal of Construction Engineering and Management
• /
• v.15 no.1
• /
• pp.28-38
• /
• 2014

Construction value engineering(VE) is often performed in the form of a short term review of designs, rather than during a regular workshop with a standardized work plan, and its application method is limited. Thus, tasks are performed by applying the method in reverse depending on the VE results, and function analysis, a key VE method, is omitted or only applied for the sake of formality. In addition, it is hard to expect great results from VE because of insufficient time and budget allowed to perform VE and a lack of understanding of VE procedures and methods. In particular, the methods used to store and reuse the tremendous amount of ideas and information created during the process of VE implementation is not systematic. Even the Korea Expressway Corporation, which has produced relatively systematic VE performance compared to other institutions, has had the above-mentioned problems. Therefore, this study aims to improve existing VE processes and suggest a method to efficiently store and retrieve VE information by analyzing the limitations of construction VE practice and the characteristics of VE for highway facilities as part of improving design VE performance.

• The korean journal of orthodontics
• /
• v.27 no.2
• /
• pp.197-208
• /
• 1997

Class III malocclusion patients can be approached with many different types of treatment methods, and thus, each patient's problems must be accurately evaluated to allow selection of the best possible treatment method. Cephalometric analysis is an essential part of diagnosis and treatment planning of orthodontic patients, and it would certainly be helpful if reliable cephalometric guidelines could be set. The author divided 482 Class III malocclusion patients(253 males and 229 females) into fourgroups according to different types of treatment methods they have received to correct imbalance between upper and lower jaws: 1) orthopedic appliance (face mask & RPE), 2) camouflage treatment with fixed appliance, 3) surgical-orthodontic treatment, 4) cross-bite correction with removable plates/ functional appliance. Cephalometric values at the time of first clinical examination were compare among the four groups. Cephalometric analysis indicates the following results: 1)the amounts of antero-posterior and vertical skeletal discrepancies and dental compensation were greatest in surgery group 2) SNB, Wits, distance from Nasion Perpendicular Plane to point a facial angle, facial convexity, and APDI were greater in orthopedic appliance group than fixed appliance(camouflage) group, but there was no statistical difference 3) removable plates/ functional appliance group showed least amounts of skeletal discrepancies and dental compensation with statistical significance.

• Journal of dental hygiene science
• /
• v.16 no.6
• /
• pp.458-463
• /
• 2016

This study aimed to assess changes in maximum bite force and psychological elements in patients with bruxism treated with botulinum toxin who visited the hospital with a chief complaint of masseter hypertrophy. From among the subjects with masseter hypertrophy as the chief complaint, 10 patients with and 10 without bruxism were selected. We measured bite force prior to botulinum toxin injection and at 2, 4, 8, and 12 weeks after the injection and assessed changes in psychological elements by using Symptom Checklist 90 Revision. The study results showed statistically significant differences in maximum bite force on both the right and left sides between the patients with and those without bruxism, according to periodic changes (p<0.05). Depression elements showed statistically significant changes in the patients with bruxism (p<0.05). In the bruxism and non-bruxism groups, the patients recovered from anxiety in accordance with the periodic changes (p<0.05). Our study results indicate that the patients with bruxism show significant changes in interpersonal sensitivity, depression, and anxiety according to the treatment periods, and that occlusal force and depression were significantly related. Therefore, when setting a treatment plan for bruxism, multilateral psychological elements must be considered, along with functional elements.

• Journal of Agricultural Extension & Community Development
• /
• v.20 no.4
• /
• pp.871-907
• /
• 2013

The purpose of this study is to establish a new rural development policy system based on the unit of a community organizations. This study is to complement or replace the existing rural development system which is based on the unit of rural villages. The communalism which is the core concept of traditional rural villages has been weakened or destroyed. Especially, economic, social and spatial communalism of a rural villages has been weakened rapidly in the process of industralization and urbanization for the last 50 years. This means that strong communalism inside rural villages and neighborhood independence from each others among rural villages are already weakened. Rural villages no longer represent rural area, unlikely the hypothesis policy makers have been used to set up rural development policies. Advanced countries like EU and Japan are well known to have a rural development policy based on the units of social organizations in the rural area. These policies have been on the main stream in the era of local decentralization. Rural resident's organization made rural site's development plan using local assets and submitted to the public sector. Then the public sector examine its value and possibilities as a rural development projects. And public sector finalize the decision on subsidy grant. These policy patterns are already introduced partly in the field of urban development programme as well as rural development programme. It is time to apply those policies more widely and to examine more systematically.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.8 no.2
• /
• pp.95-102
• /
• 2005

Currently, the government has been established GIS DB related to river as a part of the river map digitization projects such as RIMGIS and flood map. This study was aimed to demonstrate the generation of thematic maps related to river space and their management system, the one of the major river thematic maps proposed from the precedent study "Establishment of River Thematic Map Project" in an effort to maximize the utilization of river related database, the major product of the project for digitization of river maps. This study includes amending database model for building river thematic maps. Also, metadata were amended and built for efficient management and distribution of the river related data based on the national standard metadata proposed from "Establishing Standard Metadata" sponsored by National Geography Institute in 2003 for more effective management of river thematic maps. In addition, this study analyzed the method for utilizing existing data from RIMGIS and WAMIS as well as digital topographic maps to produce 25 river thematic maps in accordance of defined building procedure. Management system of the river thematic maps for Kyungan watershed has been generated for effective managing river thematic maps based on the design and pilot generation of river thematic maps, and metadata management function has been added into the management system.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.8 no.2
• /
• pp.157-165
• /
• 2005

The purpose of this study is to examine the relationship between land use patterns of riparian zones and water quality in the Geumho River watershed. A GIS database included digital land use maps (1:25,000), stream network extracted from digital topographic maps (1:5,000) and riparian zones maps by multi-buffering method. Pearson's correlation analysis was used to explain the relationship between the environmental conditions of a 30 meter buffer strip on each side and water quality. According to the result of investigation of riparian-level land use patterns, sub-watersheds on the lower Geumho River including Daegu metropolitan city were mainly developed as urban area such as residential, commercial and industrial ones, while sub-watersheds on the middle Geumho River and the main course of Nakdong River, agricultural ones such as a paddy, a dry field and an orchard. Meanwhile, the area-rate of riparian forests which play an important role in filtering nitrogen, phosphorus and sediment was estimated below the average 16%. The proportion of urban area in a 30 meter riparian bufferstrip had a negative correlation with water quality in each sub-watershed. But the proportion of forest area had a positive correlation with water quality. Henceforth, it is necessary to establish landscape planning for preparing and restoring the riparian buffer zones, concerning land form, soil type, the present land use pattern and economic aspects.

• The Journal of Korean Academy of Prosthodontics
• /
• v.54 no.3
• /
• pp.298-305
• /
• 2016

The maxillary anteriors play an important role in esthetics. Therefore after extraction, it is crucial to preserve the hard tissue and soft tissue in order to promote esthetics of restoration. There are several challenges when restoring the maxillary anteriors via implant. Some of the challenges are be maintaining consistency with neighboring teeth in terms of shade, form, and texture : as well as having harmonious emergency with the gingival margin. In this case, a traumatized patient with crown-root fracture of the maxillary central and lateral incisors is presented. The cracked teeth were extracted, and implants were inserted with bone grafts to compensate the volume of damaged area of the maxillary anterior. Cantilever implant prosthetics were planned while precise adjustments to the gingival area were made using customized impression coping to perform the esthetic restorations. The final outcome of the treatment was satisfying in both esthetic and utilitarian perspective.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.48 no.1
• /
• pp.15-24
• /
• 2020

This work examines discourse on uses of computer technology and its transformation during the last thirty years effecting Korea landscape architecture. First, in the 1990s landscape architects begun to use computers as a new technology for landscape architecture, programming computer software utilities suitable for landscape research, planning, and design. The landscape architects, acting as computer programmers, tried to explore various techniques for landscape analysis and design with a piece of software, and various experts within the field of landscape architecture collaborated with each other. However, landscape architects mainly used computer technology as a tool as a substitute for hands-on cases. Since around the 2000s, the discourse on mapping and diagrammatic techniques as a visualization technique for landscaping processes have begun. Also, realistic representations for perspective drawings using graphic software have been increasingly important. The landscape architects, acting as graphic designers, focused on the specific visualization techniques for landscape planning and design. However, computer technology has been mainly used to produce realistic visuals aids for final presentations instead of creative exploration to generate landforms. Additionally, recent landscape architects have been using landscape performance modeling and parametric modeling for landform and landscape furniture design. The landscape architects as spatial designers are actively using computer modeling as creative form-generating tools during the design process.