• Development and Reproduction
• /
• v.7 no.2
• /
• pp.81-88
• /
• 2003

Initiation and activation of sperm motility are prerequisite processes for the contact and fusion of male and female gametes at fertilization. The phenomena are under the regulation of CAMP and $Ca^{2+}$ in vertebrates and invertebrates. Mammalian sperm requires $Ca^{2+}$and cyclic AMP for the activation of sperm motility. Cell signaling for the initiation and activation of sperm motility has been well studied in the ascidians, Ciona intestinalis and C. savignyi and salmonid fishes. In Ciona, whose cell signaling for activation of sperm motility has been established, the sperm-activating and -attracting factor released from unfertilized egg requires extracellular $Ca^{2+}$ for activating sperm motility and eliciting chemotactic behavior of the activated sperm toward the egg. On the other hand, the cyclic AMP-dependent phosphorylation of protein is essential for the initiation of sperm motility in salmonid fishes. A decrease in the environmental Ti concentration surrounding the spawned sperm causes a li efflux and $Ca^{2+}$ influx through the specific $K^{+}$ channel and dihydropyridine-sensitive L-/T- type $Ca^{2+}$ channel, respectively, thereby leading to the membrane hyperpolarization and $Ca^{2+}$ influx. The membrane hyperpolarization synthesizes cyclic AMP, which triggers the luther Process of cell signaling, i.e., cyclic AMP-dependent protein phosphorylation, to initiate sperm motility in salmond fishes.almond fishes.

• Journal of the Korean Vacuum Society
• /
• v.12 no.3
• /
• pp.193-199
• /
• 2003

Ti-Cu-N and Ti-Ag-N nanocomposite films with various copper and silver contents were synthesized by arc ion plating and magnetron sputtering hybrid system. The structure and mechanical properties of these films were found to be dependant on the copper and silver concentration. The maximum hardness of Ti-Cu-N and Ti-Ag-N films showed approximately 40 ㎬ below 2 at%Me. The role of soft metallic phase in Ti-Me-N nanosturctured films containing one hard and one soft phase is also discussed.

• Applied Chemistry for Engineering
• /
• v.4 no.2
• /
• pp.240-253
• /
• 1993

Silicon alkoxides are used as a raw materials of silica fibers, coating films and fine ceramics. Specially, the alkoxides have been confirmed the best raw material for VLSI thin film of computors in recent years. Because, the impotance of silicon alkoxides are increasing more and more now a days. And so, in thls report the synthetic methods, reaction mechanism, application fields of silicon alkoxides are summerized. Also, the results of our research and technical problems of silicon alkoxide preparation are introduced briefly.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.10 no.5
• /
• pp.579-586
• /
• 2015

In this paper, we design and implement a lighting system which has a capability of adjusting brightness and colors of LED module. The lighting systems is consisted of RGB and white LEDs controlled by a micro-processor. All colors in nature can be synthesized in our lighting system by controlling brightness of 4 color LEDs individually. The current flowing to LED is limited to a maximum set value to extend the LED life time using PWM current control. The control module also includes the function that it can save and load brightness and color data set by the user. The implemented lighting system passed the electromagnetic compatibility(EMC) test such that it can be used as a commercial product.

• Journal of the Korean Chemical Society
• /
• v.35 no.2
• /
• pp.165-171
• /
• 1991

The electrochemical reduction of carbon-6-dibromo groups on 6,6-dibromo penicillanic acid 1,1-oxide(DBPA) was investigated by direct current, differential pulse polarography, cyclic voltammetry and controlled potential coulometry. The irreversible two electrons transfer on the reductive debromination of each bromo group proceeded by EC,EC mechanism at the two electrode reduction steps(-0.48, -1.62 volts). The 6-bromo-PA and 6,6-dihydro-PA was synthesized by controlled potential electrolysis. Upon the basis of results on the products analysis and interpretation of polarograms obtained at various pH, electrochemical reaction mechanism was suggested.

• Journal of the Korean Ceramic Society
• /
• v.36 no.1
• /
• pp.36-42
• /
• 1999

Stacking faults in SiC whiskers grown by three different growth mechanisms; vapor-solid(VS), two-stage growth(TS), and vapor-liquid-solid (VLS) mechanism in the carbothermal reduction system were investigated by X-ray diffraction(XRD) and transmission electron microscopy (TEM). The content of stacking faults in SiC whiskers increased with decreasing the diameter of whiskers, i.e., the small diameter whiskers (<1 $\mu\textrm{m}$) grown by the VS, TS, and VLS mechanisms have heavy stacking faults whereas the large diameter whiskers(>2$\mu\textrm{m}$) grown by the VLS mechanism have little stacking faults. Heavy stacking faults of small diameter whiskers was probably due to the high specific lateral surface area of small diameter whiskers.

• Korean Journal of Materials Research
• /
• v.7 no.4
• /
• pp.267-275
• /
• 1997

본 연구에서는 암석폐재를 대상으로 직경이 60mm인 고화체를 얻을 수 있는 수열 hot press 장치를 개발하였고, 고형화를 위한 최적조건을 찾아내는 내용을 다루었다. 이어 고화체의 기계적 성질을 평가하였고, 고화기구와 미시적 파괴거동을 규명하기위하여 SEM관찰 및 음향방출실험을 실시하였다. 고형화를 위한 최적조건은 NaOH용액이 10wt%, 수열온도가 30$0^{\circ}C$이고, 유지시간이 1시간이었다. 또한 수열반응동안에 다양한 제 2화합물들이 생성되었으며, 이들은 고화체의 기계적 성질에 큰 영향을 미쳤다. 아울러 원석의 경우에는 AE Counts가 초기화중에서부터 나타났으나, 고화체는 초기하중에서 전혀 AE Counts가 검출되지 않았다. 이와같은 사실로부터 수열 hot press법에 의해 얻어진 고화체는 원석과는 다르게 암석 입자간의 결합이 보다 치밀하게 이루어지고 있음을 유추할 수 있다.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2016.02a
• /
• pp.319.2-319.2
• /
• 2016

ZrN 코팅은 TiN과 특성이 유사한 옅은 금색의 질화 박막이나 내식성이 우수하여 의료용, 자동차 부품, 항공부품, 장식용으로 적용되고 있다. 스테인레스계 의료용 기구나 생활기구의 항균성 기능이 부여된 표면처리는 아직 널리 보급되고 있지 않아 장식성과 내부식성이 뛰어난ZrN 박막에 구리를 함유시킴으로서 항균성의 변화를 관찰하고자 하였다. 진공 아크 이온플레이팅 방법으로서 ZrN을 성장시키면서 스퍼터링법에 의하여 Cu를 함유시키는 방법으로 실험을 실시하였다. 기재는 SUS 304를 사용하였고, 공정온도 $400^{\circ}C$에서 질소분압 1-5 Pa, 아크전류 90 A의 조건에서 Cu 스퍼터링 타겟의 전류를 1-7A 까지 변화하여 구리함유 ZrN 박막을 합성하였다. 구리 함류량에 따른 XRD를 통한 결정구조분석과 SEM/EDX를 통한 성분변화분석을 실시하였다. 구리함유 박막에 대해서 시간에 따른 대장균을 성장을 분석하여 기재인 SUS304, ZrN, 구리 함유 ZrN에 대한 대장균 항균성을 조사하였다.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.18 no.3
• /
• pp.565-572
• /
• 1994

A method for the classification of kinematic chains according to the similarity in their structures is proposed. Classifcation code is defined from the contracted graph of the kinematic chain. This method of classifying kinematic chains can be effectively used for the systematic enumeration of structurally distinct kinematic chains given the number of links and degrees of freedom of the kinematic chains. Two separate steps for the enumeration are developed in the study. The first step is to generated all the possible classification codes and the next step is to generate individual kinematic chains belonging to each classification code generated. Using this two step procedure, kinematic chains up to 12 links are successfully enumerated in the present study. It is concluded that the two step method can be efficiently used for the type synthesis of mechanisms.

• Korean Journal of Plant Tissue Culture
• /
• v.27 no.3
• /
• pp.219-226
• /
• 2000

Lycopersicon peruvianum has a gametophytic self-incompatibility (GSI) mechanism controlled by a single genetic locus (S locus) with multiple alleles. S RNases, an allelic series of abundant stylar proteins, are products of the S locus in L. peruvianum and other Solanaceous plants. The $S_{11}$ RNase gene from L. peruvianum was introduced into a self-compatible (SC) species (Lycopersicon esculentum) to examine whether the expression pattern in the heterologous host mimics that in L. peruvianum. The resultant transgenic L. esculentum plants expressed the introduced gene highly in their styles, which is similar manner to the expresion in L. peruvianum. The $S_{11}$ RNase gene was expressed in the syle at a similar stage of flower development in both transgenic plants of L. esculentum and L. peruvianum without any morphological changes.