• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.21 no.1
• /
• pp.144-153
• /
• 1997

The determination of the direct kinematics of the parallel mechanism is a difficult problem but has to be solved for any practical use. This paper presents the efficient formulation of the direct kinematics for double parallel robot arm. The robot arm consists of two parallel mechanism, which generate positional and orientational motions, respectively. These motions are decoupled by a passive central axis which is composed of four revolute joints and one prismatic joint. For a set of given lengths of linear actuators, the direct kinematics will find the joint displacements of th central axis from geometric constraints in each parallel mechanism. Then the joint displacements will be converted into the position and the orientation of the end effector of the robot arm. The proposed formulation is decoupled and compacted so that it will be implemented as a real-time direct kinematics. With the proposed formulation, we analyze the motion of the double parallel robot and show its characteristics. Specially, we investigate the workspace in terms of positional space as well as orientational space.

• Proceedings of the KSME Conference
• /
• 2005.11a
• /
• pp.201.1-201.1
• /
• 2005

• Journal of Bio-Environment Control
• /
• v.13 no.1
• /
• pp.1-7
• /
• 2004

This study is kinematics for the manipulator development of cucumber harvesting. A theory value was verified by repeated error measurement after the forward kinematics or inverse kinematics analysis of manipulator. Manipulator is consisted of one perpendicular link and two revolution link. The transformation of manipulator can be valued by kinematics using Denavit-Hartenberg parameter. The value of inverse kinematics which is solved by three angles faction shows two types. Repeated errors refered maximum 2.60 mm, 2.05mm and 1.55 mm according to X, Y, Z axis. In this study, the actual coordinates of maximum point and minimum point were agreement in the forward kinematics or inverse kinematics. The results of repeated error measurement were reflect to be smaller compared to a diameter of cucumber. measurement errors were determined by experimented errors during the test. For reducing errors of manipulator and improving work efficiency, the number of link should be reduced and breeding and cultural environment should be considered to reduce the weight and use the hard stuff. The velocity of motor for working should be considered, too.

• Journal of the Korean Society for Precision Engineering
• /
• v.20 no.4
• /
• pp.103-111
• /
• 2003

The Denavit-Hartenberg symbolic notation provides the framework for the convenient and systematic method for the robot manipulator kinematics, but is limited its use to the lower pair mechanism or to the single loop mechanisms. The Sheth-Uicker notation is its revised and generalized version to be extended fur the entire domain of the link mechanism including the higher pairs. This paper proposes the method that uses the Sheth-Uicker notation fur the robot kinematics modeling. It uses the instantly coincident coordinate system and the closed loop chain fur the coordinate transformation. It enables us to model the velocity kinematics of the robot that has the complex structures such as the ternary links and the wheels in a systematic and rational way. As an implementation of the proposed method, the Jacobian matrices were obtained for not only the robot with two legs and a torso, but a manipulator on a mobile platform.

• Journal of the Korean Society for Precision Engineering
• /
• v.29 no.1
• /
• pp.64-71
• /
• 2012

In this paper, a parallel manipulator is comprised of two sliders and four links. Sliders execute a linear reciprocating motion depending on parallel guides and make the connected links rotate. A couple of links connected by sliders do coupling motion. The end-effector called a link tip has orientation angle. Through the kinematics analysis of this manipulator, we found displacement, velocity and acceleration using direct and inverse kinematics. We used equations that derived from this analysis and determined five constraint conditions. These conditions had much to do with rotation states of links, the relative relation of link length and coupling motion state. To verify those, we suggest a new algorithm regarding constraint conditions of a manipulator. With the result which performed the algorithm, we found out that operation range of coupled links was limited by relative relation of link length and that manipulator was not able to carry out a series of link motion, in case of being the link vertical between two parallel guides.

• Journal of the Korean Society for Precision Engineering
• /
• v.19 no.11
• /
• pp.46-53
• /
• 2002

In order to overcome the conventional robot's physical limitation to frequent changes in operational requirements, it is quite appealing to modularize its system components and allow them to be combined into various configurations to best suit the needs to a particular application. Several researchers have presented the concept of modular robot. In this paper, the kinematics and dynamics of modular robot are studied, which concretes the concept of modular robot. This study includes the selection of individual module, the definition of their parameters and the development of module based manipulate. analysis software package (MBMAP).

• Journal of the korean Society of Automotive Engineers
• /
• v.26 no.2
• /
• pp.23-26
• /
• 2004

일반적인 기구학의 개념은 기계를 구성하는 부품의 상대운동을 연구하는 학문이다. 즉, 기구학은 기계를 구성하는 부품의 강성이나 힘 등은 배제하고 단지 기계를 구성하는 부품의 서로 상대적인 운동관계만을 연구하는 학문이다. 따라서 기구학 해석에 있어서도 변위, 속도, 가속도만을 연구하게 되며, 해석방법에 있어서도 과거에는 도식적인 방법을 사용했으나 최근에는 컴퓨터를 이용한 방법이 보편화되어 있다.(중략)

• 제어로봇시스템학회:학술대회논문집
• /
• 2000.10a
• /
• pp.265-265
• /
• 2000

In this paper the systematic modeling method of general wheeled mobile robot is proposed. First we show how to describe kinematics properties of wheeled mobile robot in the method formulating constraint equations using Basic Homogeneous Transform(BHT) which is used mainly the kinematics modeling of manipulator, and, under assumption it's provided part of nullvector in given constraint equations, find kinematics model of mobile robot related to actuators in real robot.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.41 no.9
• /
• pp.799-807
• /
• 2017

In this paper, a new method is proposed for estimating pedestrians' walking velocity based on lower-limb kinematics and wearable inertial measurement unit (IMU) sensors. While the soles and ground are not in contact during the walking cycle, the walking velocity can be estimated by integrating the acceleration output of the inertial sensor mounted on the pelvis. To minimize the effects of acceleration measurement errors caused by the tilt of the pelvis while walking, the estimated walking velocity based on lower-limb kinematics is imposed as the initial value in the acceleration signal integration process of the pelvis inertial sensor. In the experiment involving outdoor walking for six minutes, sensor drift due to error accumulation was not observed, and the RMS error in the walking velocity estimation was less than 0.08 m/s.

• Journal of the Korean Society for Precision Engineering
• /
• v.32 no.1
• /
• pp.89-96
• /
• 2015

In this paper, it is studied that kinematic analysis of a 5-axis ultrasonic inspection equipment. The equipment is comprised of three straight axes and two rotary axes. With features of ultrasonic, the transmitter and receiver of the equipment are vertical to a test surface, operating at regular intervals. To perform this well, the motions of every link should be found on the based of kinematic analysis of the equipment. We chose starting point for testing and defined relations among all links through transformation of coordinates. For double curvature-shaped test object, we generated test paths. To follow these, we found motions of all links using inverse kinematics. By using Matlab/Simulink, simulator was developed, so that we could find out desired trajectories of main axes for a scan.