• Bulletin of the Society of Naval Architects of Korea
• /
• v.29 no.1
• /
• pp.40-47
• /
• 1992

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.47 no.4
• /
• pp.300-308
• /
• 2019

For drones to be used for industrial or agricultural applications, it is necessary to increase the payload and endurance. Currently, the payload and endurance are limited by the battery technology for electric powered drones. In addition, charging or replacing the batteries may not be a practical solution at the field that requires near continuous operation. In this paper, a procedure to optimize the power system of an electric hybrid drone that consists of an internal combustion engine, a generator, a battery, and electric motors is presented. The example drone for crop dusting is sized for easy transportation with a maximum takeoff weight of 200 kg. The two main rotors that are mechanically connected to the internal combustion engine provides most of the lift. The drone is controled by four electric motors that are driven by the generator. By analyzing the flow of the energy, a methodology to select the optimum propeller and motor among the commercially available models is described. Then, a procedure of finding the optimum operational condition along with the proper gear reduction ratios for the internal combustion engine based on the test data is presented.

• Journal of the KSME
• /
• v.29 no.1
• /
• pp.12-13
• /
• 1989

분쇄도구는 점차수차, 풍차 그리고 증기기관이란 동력기술과 맞물려 제분공정이 대규모화되어 지배자는 이를 독점, 집중화시켜 마침내 공장제도의 원형이 이루어졌던 것이다. 여기서 우리는 wind mill, water mill, rolling mill, miller, milling M/C 등 단어가 뜻하듯 단순히 "제분하는 기계" 뿐만 아니라 "자연력으로 구동되는 기계설비를 사용하였던 모든 Manufacture"라는 것을 공통어 밀(mill)에서 엿볼 수가 있다. James Watt의 증기기관이 실용 중에도 한동안 수차는 산 업 여러 분야에서 동력원으로 자리를 지켜 왔지만 현재는 획기적으로 성능이 좋은 Francis, Pelton, 및 Ossberger 수차가 상업발전소에서 쉬지 않고 돌아가고 있다. 통차, 동미차, 번차, 수대, 연애, 파쇄 등 전통적인 수차와 석구가 기본이 되어 분명히 근세 생산기계설비를 발명케 하였고 동력원으로서 화려한 전성기를 누렸다. 지금은 역사속에 잊혀져 가지만 우리는 시골 산간에서 돌아가는 물레방아의 수연한 고태를 볼 때면 민속문화학, 그리고 기술사적 측면에서 문화재로서의 명맥을 기려 잘 보존할 의무가 절실하다고 생각한다. 보존할 의무가 절실하다고 생각한다.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.2 no.3
• /
• pp.40-49
• /
• 1994

This paper describes the method to investigate combustion pressure in the cylinder without modifications of engine. Assuming engine dynamics as a single degree of freedom cylinder pressure is estimated using the variation of crank shaft speed. For this study pressure, crank shaft sped, and load are sampled by the crank angle. This study suggests the variation of crank shaft speed can be used as parameters of feedback engine control.

• KIPE Magazine
• /
• v.16 no.3
• /
• pp.42-48
• /
• 2011

전기철도차량은 차량의 운행에 필요한 전력 및 동력을 공급하기 위한 대용량 추진제어 컨버터/인버터, 소용량 스위칭모드 전원장치와 같은 전력변환장치와 견인전동기에 이르기까지 다양한 설비를 갖추고 있다. 전기철도차량의 성능평가는 전력변환장치와 견인전동기를 포함한 추진장치의 성능평가라 할 수 있을 정도로 많은 비중을 차지하고 있다. 한국철도기술연구원은 국토해양부로부터 지정받은 성능시험기관으로써 국내 다양한 철도차량의 성능평가를 수행하고 있다. 본 논문에서는 철도차량의 성능시험기준을 근간으로 철도차량용 추진제어 인버터와 견인전동기의 성능 시험평가에 대한 방법 및 다양한 성능 시험평가 사례에 대하여 소개하고자 한다.

• Bulletin of the Society of Naval Architects of Korea
• /
• v.41 no.1
• /
• pp.33-47
• /
• 2004

조선기자재는 선박의 건조 및 수리에 사용되는 모든 기계와 자재류를 일컫는 것으로, 선종과 규모에 따라 다소 차이가 있으나 약460여종에 이르며 선박 건조원가의 55∼65%를 차지하고 있다. 선박부품인 조선기자재는 기능별로 나누어 금속제품, 화학제품, 용접재료, 주단제품으로 구성되는 선체부, 엔진을 포함하는 추진장치와 보조기계로 대별되는 기관부, 조타, 계선, 하역, 안전장비 및 거주설비 등의 의장부 및 동력, 배선, 조명, 항해통신, 제어장치 등으로 구성되는 전기ㆍ전자부로 분류된다. 특히 최근에는 방화ㆍ방재 설비로 대표되는 안전설비를 의장부에서 별도로 분류하기도 하며, 선박의 자동화 추세에 따라 전기와 전자부분을 분리하여 분류하기도 한다.(중략)

• KIPE Magazine
• /
• v.16 no.2
• /
• pp.32-37
• /
• 2011

전 세계적으로 강화되고 있는 환경규제와 고유가에 대응하기 위해 자동차 산업은 내연기관 자동차에서 에서 전기자동차로 기술의 패러다임이 변화하고 있다. 본 고에서는 전기자동차 구동 시스템의 핵심부분인 구동모터, 인버터, 동력전달 부품, 그 외 전장부품의 연구방향과 세부 기술을 설명하고 전기구동 시스템의 적용사례, 향후전망 및 연구방향에 대해 고찰하고자 한다.

• Journal of the Korean Institute of Gas
• /
• v.22 no.6
• /
• pp.34-39
• /
• 2018

Natural gas is attracting attention as an alternative to existing fossil fuels. Natural gas has a high octane number. Therefore, knocking does not occur even if the compression ratio is increased, so that the thermal efficiency and the output can be improved. And it is relatively easy to apply the natural gas supply system to the internal combustion engine hardware system. In this study, a gasoline direct injection turbo engine was converted into a natural gas port injection type turbo engine. Therefore, the combustion and performance of the engine are measured and compared comprehensively in the region where the turbo operates.

• Journal of Korea Technology Innovation Society
• /
• v.13 no.4
• /
• pp.717-737
• /
• 2010

In the face of climate changes and economic crisis, nations across the world spare no efforts to identify new growth engine industries and lift the domestic economy by promoting green technologies and tightening environmental regulations. The Korean government also tries to create and promote new growth engine industries. As part of these efforts, it launched the New Growth Engine Fund in 2009, a private and public initiative to support small- and medium-sized companies that own promising new green technologies. However, it has a limitation on making investment in the fund due to the global economic crisis, the significant size of necessary capital investment and the difficulty of finding investment companies. The lukewarm response of the private sector arose a need to change the fund management method. Against this backdrop, this paper aims to propose efficient strategies of managing various funds such as cooperation fund between the central and local governments, incubator fund financed by the government and financial institutions and win-win cooperation fund for the government, large companies and partners as a means of developing and supporting new growth engine industries in a sustainable way. The importance of this research lies with the proposition of various funds that can be used to implement the government's strategic goal of developing new growth engine industries.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.23 no.1
• /
• pp.67-72
• /
• 2017

This study developed an electric power propulsion personal watercraft by combining a battery and an electric system from the domestic automobile industry with water motorcycle from marine leisure industry in a convergence of technology. It also developed a safety inspection plan and type approval standard for personal watercraft that use electric power propulsion. For the registration and production of the electric power PWC (Personal Watercraft), a safety inspection standard (draft) and type approval standard (draft) have been established. PWC that use this electric power propulsion certification standard have been divided into two categories according to the use of gasoline engines as related to the ship's electrical system. The contents of these safety inspections standards is divided into 7 categories, and their purpose is to confirm the facilities used for the safe operation of PWC. Type approval is divided into 7 categories and is intended to ensure the safe production of PWC. This is basic data can be used to establish criteria for safety inspection and type approval of electric power propulsion vessels and to guide the production of the environmentally friendly PWC in Korea.