• Magazine of the Korea Concrete Institute
• /
• v.6 no.6
• /
• pp.151-158
• /
• 1994

In this work, in order to inrprove the flexural strength of hardened portlarid cerncrit paste, mix ing water was reduced to water ccrnent ratio of 0.1 aid water soluble polymer such as hydroxy propyl methyl cellulose was adclelri to the paste to obtain a better dispersion. The paste was kneaded by the twin roll mill for cornpact and homogeneous mixing. The high strength mechanism of the hardened cement paste may be due to the removal of macropores larger than 100${\mu}m$, the reduction of capillary pores acting as the passage of crack propagation, the increase of Young's moculus with iticrease of unhytlratcci cenxxnt ard the incicasc of fracture toughnevs with the crack toughening mechanism (grain bridging, polymer fibril bridging and fritional inter-locking).

• Journal of the Korean Society for Nondestructive Testing
• /
• v.14 no.2
• /
• pp.90-100
• /
• 1994

Ultrasonic velocities are widely used in the investigation of material properties. In this paper, a micromechanics model and the ultrasonic velocity were used to develop a nondestructive method to determine the density variation due to porosity in structural SiC. The micromechanics model developed can consider the pore shape and orientation. The model also takes into account the interaction between pores so that it can be applied to the material with high porosity content. A contact pulse overlap method was used to measure the ultrasonic velocities of porous SiC samples, and there was a linear correlation between the velocity and density (or porosity). Using the model and the measured velocity, the bulk density can be easily calculated. The calculated density was in good agreement with that obtained by Archimedes' method.

• Proceedings of the Korean Society For Composite Materials Conference
• /
• 2005.11a
• /
• pp.133-136
• /
• 2005

원자현미경을 이용하여 나노허니컴 구조물의 굽힘 탄성계수를 측정하였다. 나노허니컴 구조물의 단면적은 기공들의 배열 때문에 위치마다 다르게 되고, 이로 인해 관성 영역 모멘트는 상수값으로 계산되지 않는다. 본 연구에서는 나노허니컴 구조물의 단위 면적 내 관성 영역 모멘트 평값을 벌크 구조의 나노허니컴 구조물의 영률로 가정하였다. 단위 면적 내 광성 영역 모멘트 평균값과 나노허니컴 구조물의 기공률 사이에 관계식이 유도되었다. 기공의 직경이 31 nm 인 양극 산화 알루미늄 필름이 나노허니컴 구조물로 제작되었다. 양극 산화 알루미늄의 영률이원자현미경을 이용한 굽힘 실험으로 측정되었으며, 나노 인장시험기의 인장 실험 결과와 비교되었다.

• Journal of the Korea Convergence Society
• /
• v.10 no.4
• /
• pp.139-145
• /
• 2019

This paper investigated the strength and stiffness of composite truss unit structures. The model used is a core-filled model combining the Kagome model and the cube truss model. The material properties used for the analysis are 304 stainless steel with elastic modulus of 193 GPa and yield stress of 215 MPa. The theoretical equation is derived from the relative elasticity relation of Gibson - Ashby ratio, the analysis was performed using Deform 3D, a commercial tool. In conclusion, the relative elasticity for this unit model correlates with 1.25 times the relative density and constant coefficient, elasticity is inversely proportional to pore size. The relative compressive strength has a correlation with relative density of 1.25 times. Proof of this is a real experiment, the derived theoretical relationship should further consider mechanical behavior such as bending and buckling. In the future, it is hoped that the research on the elasticity and the stress according to the structure of the three-dimensional space will be continued.

• Food Engineering Progress
• /
• v.23 no.2
• /
• pp.118-124
• /
• 2019

This study aims to investigate the physical properties of extruded psyllium husk upon the addition of emulsifiers. Three different emulsifiers-glycerol monostearate (GMS), polyglycerol ester (PGE), and sugar ester (SE)-were added to the mixture of psyllium husk and rice powder before extrusion. Extrusion was performed using a twin-screw extruder at 140℃ die temperature, 200 rpm screw speed, and 16% feed moisture content. The physical properties of psyllium husk extrudates including expansion ratio, specific length, piece density, texture profile, color properties, water soluble index, and water absorption index were evaluated. It was observed that the expansion ratio was the highest while the specific length and piece density were the lowest in the control which had no emulsifiers. Texture profile analysis showed that the apparent elastic modulus and breaking strength were highest in the extrudate with a PGE of 0.1%. The adhesiveness was found to be lowest in the extrudates with an SE of 0.1% and GMS of 0.5%. Lightness value was highest in the extrudate with a PGE of 0.1%. Color difference, water soluble index, and water absorption index were highest in the control. The results reveal that some physical properties of extruded psyllium husk were improved with the addition of emulsifiers. This finding provides useful information for the development of psyllium snacks with good physical characteristics.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.15 no.1
• /
• pp.21-26
• /
• 2005

In order to simulate the powder compaction process and to assess the effects of packing randomness and particle arrangement 2-dimensional model of rod array compaction using quasi-random multiparticle array is introduced. The elastic modulus of porous ceramics is computed by the homogenization method. With 3 Al₂O₃ and 3 Al particles the compaction processes associated with the porosities are simulated by the explicit finite element method, based on the elastic modulus found by the homogenization method. The simulation results are compared with both previous analytical ones and experimental measurements. Finally, in order to find the relationship between the friction coefficient of powder particles and the relative density, the sensitivity analysis is performed.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.15 no.4
• /
• pp.162-167
• /
• 2005

As the properties of porous materials during the drying process relate to the atomistic defects of heterogeneous materials such as dislocation, grain, grain boundary, pore, etc., the knowledge of nano-scale analysis is needed in order to accurately analyze the drying process for porous materials. In this study, the atomic behavior of porous materials Is statically predicted by using the molecular dynamics simulation and the nano-scale material properties are computed. The elastic modulus, thermal expansion coefficient, and volumetric heat capacity numerically found from the molecular dynamics simulation are compared with those of experiment and theory and proved the accuracy.

• Applied Chemistry for Engineering
• /
• v.29 no.3
• /
• pp.318-324
• /
• 2018

In this study, PAN (polyacrylonitrile) based activated carbon fibers were prepared by water vapor activation method which is a physical activation method. Activation was performed with temperature and time as parameters. When the activation temperature reached 700, 750 and $800^{\circ}C$, the activation was carried out under the condition of a water vapor flow rate of 200 ml/min. In order to analyze the pore structure of activated carbon fibers, the specific surface area ($S_{BET}$) was measured by the adsorption/desorption isotherm of nitrogen gas and AFM analysis was performed for the surface analysis. Tensile tests were also conducted to investigate the effect of the pore structure on mechanical properties of fibers. As a result, the $S_{BET}$ of fibers after the activation showed a value of $448{\sim}902m^2/g$, the tensile strength decreased 58.16~84.92% and the tensile modulus decreased to 69.81~83.89%.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.29 no.5
• /
• pp.437-445
• /
• 2016

Recently, polyurethane foam has been used in various industry fields to preserve temperature environment of structures, and a wide range of loads from the static to the dynamic are imposed on the material during a life period. The biggest characteristic of polyurethane foam is porosity as being polymeric material, and it is generally known that insulation performance of the material strongly depends on internal void size. In addition, polyurethane foam's mechanical behavior has high dependence on strain rate and temperature as well as being highly non-linear ductile for compression. In the non-linear compressive behavior, volume fraction of voids and elastic modulus decrease as strain increases. Therefore, in this study, temperature-dependent viscoplastic-damage constitutive model was developed to describe the non-linear compressive behavior with the aforementioned features of polyurethane foam.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2009.05a
• /
• pp.49.1-49.1
• /
• 2009

최근 손상된 생체조직의 재생 또는 대체를 위하여 다공성의 지지체(scaffold)를 이용하는 연구가 활발히 이루어져 왔다. 지지체 재료는 조직 재생을 목적으로 하는 경우에는 생분해성 고분자, 생흡수성 세라믹스 또는 이들의 복합재료가 사용되고, 조직 대체를 목적으로 하는 경우에는 금속 또는 세라믹스 재료가 단독으로 사용된다. 현재 경조직 대체를 위한 임플란트 재료로 사용되고 있는 금속재료 중 대부분이 타이타늄 또는 타이타늄 합금이다. 타이타늄은 비강도, 내식성이 우수하며, 생체 내 환경에서 부동태피막 재생 속도가 빠르고, 섬유상 결체조직 형성 두께가 얇아 생체의료용 소재로서 각광을 받고 있다. 다공성 타이타늄은 기존 타이타늄 소재의 장점에 다공체의 구조적인 특성을 부가하여 하중을 받는 골 결손부에 사용될 경우 뼈와의 탄성계수 차이에서 기인하는 응력차폐(stress shielding) 효과를 최소화할 수 있고, 다공체 내부로 골조직 성장을 유도할 수 있어 지지체와 골조직이 일체화되는 골융합 효과의 극대화를 기대할 수 있다. 본 연구에서는 기공 구조를 다양하게 제어할 수 있고, 3차원적 연결 기공구조를 만들 수 있는 적층조형(layer manufacturing) 기술을 이용하여 3차원 다공성 타이타늄 지지체를 제조하였으며, 이에 대한 세포독성, 조골세포 증식능 등 in vitro 생체적합성을 평가하고, Rat model 을 이용한 in vivo 생체적합성을 평가하였다. 또한 지지체의 골조직 재생 유도성의 증대를 위한 생체활성처리 영향도 분석 평가하였다.