• Membrane Journal
• /
• v.32 no.6
• /
• pp.486-495
• /
• 2022

This study presents the improved recovery efficiency of rare metal ions through the modified separation membrane wettability and hydrogen ion permeation in the anion exchange membrane (AEM) under the recovery process of combined electrodialysis and solvent extraction. Specifically, the wettability of the separator was enhanced by hydrophilic modification on one separator surface through polydopamine (PDA) and lipophilic modification on the other surface through SiO₂ or graphene oxide (GO). In addition, the modified surface of AEM with polyethyleneimine (PEI), PDA, poly(vinylidene fluoride) (PVDF), etc. reduces the water uptake and modify the pore structure for proton ions generation. The suppressed transport resulted in the reduced hydrogen ion permeation. In the characterization, the surface morphology, chemical properties and composition of membrane or AEM were analyzed with Scanning Electron Microscopy (SEM) and Fourier Transform-Infrared Spectroscopy (FT-IR). Based on the analyses, improved extraction and stripping and hydrogen ion transport inhibition were demonstrated for the copper ion recovery system.

• Clean Technology
• /
• v.16 no.3
• /
• pp.191-197
• /
• 2010

Repair reaction of plasma damaged porous methyl doped SiOCH films was carried out with silylation agents dissolved in supercritical carbon dioxide ($scCO_2$) at various reaction time, pressure, and temperature. While a decrease in the characteristic bands at $3150{\sim}3560cm^{-1}$ was detectable, the difference of methyl peaks was not identified apparently in the FT-IR spectra. The surface hydrophobicity was rapidly recovered by the silylation. In order to induce effective repair in bulk phase, the wafer was heat treated before reaction under vacuum or ambient condition. The contact angle was slightly increased after the treatment and completely recovered after the subsequent silylation. Methyl groups were decreased after the plasma damage, but their recovery was not identified apparently from the FT-IR, spectroscopic ellipsometry, and secondary ion mass spectroscopy analyses. Furthermore, Ti evaporator was performed in a vacuum chamber to evaluate the pore sealing effect. The GDS analysis revealed that the open pores in the plasma damaged films were efficiently sealed with the silylation in $scCO_2$.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.31 no.2
• /
• pp.63-71
• /
• 2023

Increased nitrogen in the water system has become an important environmental problem around the world, as it causes eutrophication, algae bloom, and red tide, destroys the water system, and undermines water's self-purification. The most common form of nitrogen in the water system is ammonium ion (NH₄⁺), and the largest portion of ammonium ions comes from wastewater. NH₄⁺ is a major contributor to eutrophication, which calls for appropriate treatment and measures for ammonium removal. This study produced biochar by applying Sorghum × drummondii, a type of biomass with a great growth profile, analyzed the adsorption capacity of Sorghum × drummondii biochar produced from the changing carbonization temperature condition of 200 to 400℃ in the ammonium ion range of 10 to 100 ppm, and used the results to evaluate its potential as an adsorbent. Carbonization decomposed the chemical structure of Sorghum × drummondii and increased the content of carbon and fixed carbon in the biochar. The biochar's pH and electrical conductivity showed high adsorption potential for cations due to electrical conductivity as its pH and electrical conductivity increased along with higher carbonization temperature. Based on the results of an adsorption experiment, the biochar showed 54.5% and 17.4% in the maximum and minimum NH₄-N removal efficiency as the concentration of NH₄-N increased, and higher carbonization temperature facilitated the adsorption of pollutants due to the biochar's increased pores and specific surface area and subsequently improved NH₄-N removal efficiency. FT-IR analysis showed that the overall surface functional groups decreased due to high temperature from carbonization.

• Applied Chemistry for Engineering
• /
• v.34 no.6
• /
• pp.576-583
• /
• 2023

This study investigated the possibility of new adsorbent materials made from pig bone-based biomass. To this end, the properties of pig bone-based activated carbon (PAC) prepared from animal biomass were investigated, and its carbon dioxide adsorption performance was examined. KOH was used as the activation agent, and the specific surface area increased with increasing activation temperature, and the adsorption efficiency of carbon dioxide also increased. The sample activated at 800 ℃ exhibited the largest specific surface area of 1208.7 m²/g and the highest CO₂ adsorption efficiency of 3.33 mmol/g at 273 K, 1 bar. However, the specific surface area and the CO₂ adsorption efficiency decreased at activation temperatures above 900 ℃ due to crystallinity changes and overactivation. On the other hand, when the selectivity was calculated using the ideal adsorption solution theory, PAC-900 samples at 273 K and below 0.8 bar showed the best selectivity. These results suggest that the high selectivity of carbon dioxide/nitrogen adsorption at 273 K is due to the carbon dioxide adsorption capacity of hydroxyapatite formed by the decomposition of carbonate when pig bone is activated at 900 ℃ and its crystallinity.

• Journal of the Institute of Convergence Signal Processing
• /
• v.24 no.1
• /
• pp.27-33
• /
• 2023

Recently, water shortages have occurred due to climate change, and the need for water management of agricultural water has increased due to the occurrence of algal blooms in reservoirs. Existing algae prevention is operated by putting many people on site and misses the optimal spraying time due to movement through boats. In order to solve this problem, it is necessary to block contamination in advance and move within time to uniformly spray complex microorganisms uniformly. Control drones are used for pesticide spraying and can be applied to algae prevention work by utilizing control drones. In this paper, basic research for the establishment of a marine control system was conducted for application to the reservoir environment, and as one of the results, the characteristics of a drone nozzle, a core technology that can be used for control drones, were calculated. In particular, it was found that the existing agricultural control drones had a disadvantage that the concentration was non-uniform within the suggested spraying interval, and to compensate for this, nozzle positioning and nozzle spraying uniformity were calculated. Based on the experimental results, we develop a core algorithm for establishing an algal bloom monitoring system in the reservoir environment and propose a precision control technology that can be used for marine control work in the future.

• Applied Chemistry for Engineering
• /
• v.35 no.2
• /
• pp.107-114
• /
• 2024

In order to produce high-yield pitch-based activated carbon, pitch was synthesized by blending pyrolysis fuel oil (PFO) and coal-tar. Pitch was synthesized by varying the amount of coal-tar from 0~20% compared to PFO and reacting at 380~420 ℃ for 3 h. The synthesized pitch had a softening point between 80 and 260 ℃, and yields ranged from 10 to 40%. At all synthesis temperatures, as the coal-tar blending ratio increased, the yield increased and the softening point decreased. After considering the selected pitches (softening points: 230~260 ℃), pitches containing coal-tar were more volatile at a low boiling point and had a higher residual carbon content. This is a difference in the composition of coal-tar and PFO, and it was con- firmed that coal-tar has a lot of aromatics and PFO has a lot of aliphatics. The selected pitch was heated to 950 ℃ in a tubular reactor and physically activated with steam for 1 hour. Activated carbon containing coal-tar showed higher yield and microporosity compared to only PFO. In this study, the effect of increasing activated carbon yield by blending pitch raw materials was confirmed, and the physical activation characteristics according to the coal-tar mixing ratio were examined.

• Journal of Bio-Environment Control
• /
• v.29 no.4
• /
• pp.388-398
• /
• 2020

Watermelon yield mainly depends on soil water content controlled by irrigation in a plastic greenhouse. In this study, we investigated the effect of different soil moisture contents affected by irrigation starting point on growth, yield, and physiological responses of small-sized watermelons. Irrigation was initiated at 5 different levels of soil water content as a starting point with soil moisture detecting sensor after 14 days of transplanting, and stopped at 7 ~ 10 days before harvest. These treatments were compared with the conventional periodic irrigation as control. When soil had the lowest moisture content (-50 kPa), the overall shoot growth was retarded, but the root length and root dry weight increased. The photosynthetic parameters (photosynthetic rate, stomatal conductance, and transpiration rate) of watermelon leaves decreased significantly in the lowest soil moisture content (-50 kPa). On the other hand, the photosynthetic rates of watermelon leaves grown with irrigation starting point between -20 and -40 kPa were observed to be higher than those of other treatments. Fruit set rate and marketable fruit yield increased significantly at -30 kPa and -40 kPa. Proline, abscisic acid (ABA), total phenol and citrulline, which are known to contribute to stress tolerance under drought condition, increased as soil water content decreased, particularly, the largest increases were recorded at -50 kPa. From these results, it was found that an appropriate water supply adjusted with an irrigation starting point between -30 and -40 kPa could help to keep favorable soil water content during the cultivation of small-sized watermelons, promoting the marketable fruit production as well as inducing the vigorous plant growth and reproductive development.

• Journal of Bio-Environment Control
• /
• v.21 no.2
• /
• pp.147-152
• /
• 2012

This study was conducted to investigate the photosynthetic R. micranthum by natural habitats. In the results, natural habitats didn't affect values of light saturated point, light compensation point and photosynthetic capacity of R. micranthum. We investigated light response curve and chlorophyll content at each habitat. Light compensation points were 11.8 ${\mu}mol\;m^{-2}\;s^{-1}$, 11.5 ${\mu}mol\;m^{-2}\;s^{-1}$ and 10.4 ${\mu}mol\;m^{-2}\;s^{-1}$ in Seokpo-ri, Yeonha-ri, and Mt. Worak. Light saturation points showed that R. micranthum is shade tolerant specie which has the light saturation point approximately 500~600 ${\mu}mol\;m^{-2}\;s^{-1}$. Photosynthetic rates of R. micranthum leaves were 5.5 ${\mu}mol\;m^{-2}\;s^{-1}$, 5.4 ${\mu}mol\;m^{-2}\;s^{-1}$ and 5.6 ${\mu}mol\;m^{-2}\;s^{-1}$ in Seokpo-ri, Yeonha-ri and Mt. Worak. On the other hand, since between $20^{\circ}C$ and $30^{\circ}C$, it appeared that the values of net photosynthetic rates of R. micranthum leaves in all sites were high. Especially, the rates were highest at $25^{\circ}C$. Because of low stomatal transpiration rate in saturation radiance, the moisture utilization efficiency in Yeonha-ri was lower than other habitats. Rates of chlorophyll a, chlorophyll b, and total chlorophyll content in Mt. Worak were no significant difference. Therefore R. micranthum has characteristic of shade tolerant species. The moderate temperature for R. micranthum is between $20^{\circ}C$ and $30^{\circ}C$.

• Journal of Korean Society of Forest Science
• /
• v.40 no.1
• /
• pp.1-18
• /
• 1978

Three Pinus densiflora populations as shown in location map (Fig. 1) were studied in 1977. These succeed the population numbers 10, 11 and 12 after the preceeding populations. Following the previous study methods, 20 trees were chosen from each population and the morphological characteristics such as tree forms, branching habit, needle and wood properties were investigated. The results are summerized as follows; 1. The mean stand ages were ranged from 40 to 45. The growth performances of trees of population 10 and 11 was similar, but 12 seemed to be inferior more or less. 2. The ratios of clear bole length was 0.53 in population 12 as the highest but 0.43 for population 10 as the lowest. 3. The population 12 was considered to be a stand of the coarser branching habit having the crown index (The maximum crown diameter/the crown length) 1.65 though the mean branching angle indicates almost horizontal. 4. The differences were observed in the clear bole length ratios and crown-indices between populations as shown in Fig. 3 and 4. 5. No inter-population differences in serration density of needle was shown but significant inter and intra-population and individual differences (within population) in number of stomata rows and resin duct. 6. Population 12 shown 0.119 of resin duct index as the maximum. 7. The pattern of diameter growth, analyses based on the width of 10-year-ring segment unit (for example, the 1st segment denotes the width between pith center and 10th year ring and the 2nd one is from 11th to 20th year ring and so on.), was alike among populations as shown in Fig. 9. 8. No significant differences between population in mean summer wood percentages as well as in wood specific gravity was observed. The values of wood specific gravity were increased with the increase of ages in population 10 and 11 however vice versa in population 12. 9. The fiber length was increased with the increase of age but no differences between populations as shown in Fig. 12.

• Korean journal of food and cookery science
• /
• v.21 no.3 s.87
• /
• pp.301-310
• /
• 2005

The effects of defatted soy flour on the physicochemical characteristics of dough and bread making properties were studied. Defatted soy flour is added to wheat flour for bread-making in order to maximize the use of isoflavones in the soybean. Different particle sizes of both defatted soy flour and wheat flour were prepared by grinding and sievingwith meshes. In the mixograph test, the addition of defatted soy flour to wheat flour increased the requirement for water and decreased the dough development time. Water absorption rates were also investigated to determine the optimum quantity of water for good dough. As the level of defatted soy flour mixed with wheat flour increased, the sedimentation and P.K. values decreased. In comparison with control, the bread made with defatted soy flour especially had a lower specific loaf volume. Specific loaf volume of wheat flour-defatted soy flour bread prepared (Ed- this is an incomplete sentence, it's only a subject clause, and I don't how what you intend to state). In terms of the staling rate and hardness of the wheat flour-defatted soy flour bread, the increased defatted soy flour had a faster staling rate during storage at 5? than at 25? for 5days. From the result of sensory evaluation, wheat flour-defatted soy flour breads containing up to $4\%$ defatted soy flour were rated as being of high quality.