• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.11a
• /
• pp.261-261
• /
• 2009

Anode 지지형 SOFC의 Anode 지지층 제조에 있어 Ni의 입성장이 일어나면 전극의 반응면적이 줄어들어 전기전도도가 감소되므로 소결체의 제조공정이 매우 중요하다. 기공형성제의 함량이 증가할수록 기공율도 증가하였고 기공체의 함량이 20%를 넘어가면서 기공율은 오히려 줄고 밀도도 감소하였다. Anode 지지체는 $1200^{\circ}C$ 이상에서 열처리하여야 입자간 소결이 이루어지며 승온 속도를 $2.5^{\circ}C$ 유지하여 20% 수준의 기공률을 형성하였다. 소결한 음극지지체를 환원하였을 때 35%수준의 개기공을 형성하였고 전해질과의 접착성도 우수하였다.

• Journal of the Korean Ceramic Society
• /
• v.40 no.6
• /
• pp.572-576
• /
• 2003

Open/closed porosity, pore size and its distribution and pore type as a funtion of sintered density of UO$_2$-20 wt％CeO$_2$ pellets were investigated. Pore appeared almost closed-type with the density above 96％ of the theoretical density. Bimodal pore size distribution was observed regardless of the sintered density, but the number of pore decreased with increasing the sintered density. The shape of pore was changed from irregular shape to round type with increasing the sintered density.

• Analytical Science and Technology
• /
• v.5 no.2
• /
• pp.217-222
• /
• 1992

An attempt was made to analyze green microstructure of AIN samples prepared by slip casting and dry pressing through Hg-porosimetry. Slip cast samples with narrow pore size distribation and high packing density showed higher sinterability and homogeneous distribution of second phase(s). Hg-porosimetry is and effective way to determine pore structure if "ink bottle" phenomenon does not occur. A comparison study with porosity measurement by quantitative microscopy showed that the effectiveness of Hg-porosimetry measurement could be extended to higher sintered density as long as pores remained open.

• Journal of Technologic Dentistry
• /
• v.17 no.1
• /
• pp.41-57
• /
• 1995

This study was conducted to collect and analyze previous information in order to manage efficience, improve experience effect and promote employment rate. The questionnaire interview with 27 chief of dental Laboratory refered clinical experience in technology department about clinical experience in 14 Jumior colleges were also investigated. The results were summarried as follows : The portion of age of 35-39 among chief of dental Laboratory was 40.7% which was the highest, that of male was 96.3%, that of junior college graduate was 97.5%, that of 10years experience was 92.6% and that of ceramic technician was 85.2%, 63.0% dental laboratory for clinical experience was a bore space of 30pyong. Aspect of dental laboratory management, manufacturing all part of prosthetic restoration was 29.6%, othodontic appliance and ceramic restoration was 7.4%, 3.8%, each. The percentage of 40.7 was having connection with 30-3a dental clinics and referring case per day was 10-19 cases(40.7%), manufacturing time of referred prosthetic restoration was 3-4 days(77.8%), places preparing seminar room for education was 29.6%, above a place of 40pyong was 11.1% 30-34 pyong and 35-39 pyong was 7.4% each. During training of 2 years education course student, 18.5% was rack of thorough occupational career. While 44.4% will want the more salary among 3years education course student, 74.1% will expect the more dental techmicians would engaged in their field, 51.9% will hope improve of their theory and practice, 29.6% be expected better skill and 14.8% be expected better theory. Attitude of clinical experience places was distributed by 59.3% of offering only experience chance, 25.9% of wasting time and 29.0% of annoying. The big emphasis of climical experience was thorough occupational career(44.4%). The clinical experience places of our college were selected after direct visiting, so their condition of management was not that bad but most of dental laboratory were poor in management state and working environment. Therefore it is difficult to choose appropriate places and dental Laboratory are also limited manpower and time as suppliers. So that it recommended to induce flexible management of experience period by interval and rotation of experience places among college and to applicate intern-system for employment ant industry-college cooperation aspect.

• Korean Journal of Plant Taxonomy
• /
• v.44 no.2
• /
• pp.91-99
• /
• 2014

Leaf anatomical study of Pinus thunbergii collected from 12 different coastal regions of Korea was conducted to understand the adaptive variation on leaf traits. Basic anatomical features are typical pine needle type with fibrous epidermis, 2-3 layered hypodermis, sunken stomata, monomorphic mesophyll, and well-represented bundle sheath. The bundle sheath surrounds a couple of vascular bundle separated by parenchyma bands. On the basis of their position, the resin ducts are of three types; external, medial and internal of the bundle sheath. The total number of resin ducts in all samples varies from 4 to 12. The stomata were found on stomatal bands throughout the leaf surface. Important dissimilarities observed on P. thunburgii leaf are the number and position of resin ducts and the number of stomata rows in leaf surface.

• Journal of Plant Biology
• /
• v.28 no.2
• /
• pp.105-118
• /
• 1985

This study was carried out to investigate the epidermal structure and types of stomata on the upper and lower surfaces of the leaves in six species and one variety belonging to Korean Crassulaceae. The shape of epidermal cells was polygonal, isodiametric, or elongated. The cell wall was thick, sinuous or deeply sinuous. The subsidiary cell wall was thin or mostly arched. The cytolith-containing cells were found in Orostachys japonicus. The distribution of stomata was more on the upper surface than on the lower surface in the leaves of O. japonicus and Sedum sarmentosum. The stomata in the other species were less on the upper surface than on the lower surface, and stomatal size was different in each species. The great majority of stomatal types was the helico-eumesogenous type. This type was subdivided into two, parahelico-eumesogenous type and diahelico-eumesogenous type by us on the basis of the angle of division of guard mother cell and the long axis of the last-formed subsidiary cells. Sometimes allelo-eumesogenous type as well as aniso-eumesogenous type was found. The tetra-eumesogenous type with four mesogenous subsidiary cells was rarely observed. It was observed that the varieties of aniso-eumesogenous type with one to three subsidiary cells and one helix of subsidiary cells were developed by the secondary division of subsidiary cells of aniso-eumesogenous stoma. The compound shape of helico-eumesogenous stomata was found. Five new kinds of stomatal types were observed as follows; the helico-tetra-eumesogenous type, the coallelohelico-eumesogenous type, the cohelico-allelo-eumesogenous type, the duplotetra-eumesogenous type, and the aniso-euperigenous type. These types were reported here in the vascular plants for the first time.

• Journal of Plant Biology
• /
• v.28 no.1
• /
• pp.29-44
• /
• 1985

This study was carried out to investigate the types and frequency of abnormal stomata in Crassulaceae. We observed the surface of the leaves on twenty four species involved five varieties belonging to eight genera of Crassulaceae. Nineteen types of abnormal stomata were found in the families. Among them three types such as the single guard cell, the aborted stomata, and the single-aborted guard cell were highly observed from nineteen to twenty four species, and two types of the overlapped-thickening guard cells and the arrested stomata exhibited commonly from seven to thirteen species. The another types of them rarely occurred from one to five species. Most of abnormal stomata were found in S. alboroseum, P. chinense and S. sarmentosum, and a few types of them were observed in the other species. The three types of the ballooning guard cells, the cross cleaved stomata, and the fused pore stomata were first reported here in the seed plants. It was thought that the abnormal stomata were formed by the result of degeneration and abnormal development of normal stomata.

• Proceedings of the Plant Resources Society of Korea Conference
• /
• 2023.04a
• /
• pp.30-30
• /
• 2023

한국산 체꽃속(Scabiosa L.)의 외부형태형질을 바탕으로 구분한 5가지 변이 유형[솔체꽃(S. comosa) Type 1-2, 체꽃(S. tschiliensis f. pinnata) Type 3-4, 구름체꽃(S. tschiliensis f. alpina) Type 5]에 대해 잎 표피와 화분의 미세구조를 관찰하였다. 잎 표피세포의 크기는 향축면은 평균 12.4 × 6.7 ㎛로, Type 1이 가장 작고 Type 3가 가장 컸으며, 배축면은 평균 9.4 × 4.6 ㎛로 모든 유형이 비슷하게 나타났다. 모용은 단세포성 선상 모용이 일부 유형에서, 다세포성 비선상 모용이 모든 유형에서 관찰되었다. 선상 모용은 향축면에서 Type 1과 5에만 있었으며, 두 유형 중 Type 5의 모용이 길이 72.2 ㎛로 더 길고, 단위면적 (0.01 mm²) 당 개수도 5개로 더 많았다. 배축면에서는 Type 1, 3 및 5에 있고, 단위면적 당 개수가 Type 1과 5는 3~6개로 비슷하였으나, Type 3은 1개 이하로 매우 드물게 나타났다. 기공복합체는 부등형으로 양면에 분포하며, 향축면의 공변세포 크기는 평균 4.4 × 2.7 ㎛로 너비는 유사하나 길이는 Type 1과 5가 3.1 ㎛, 3.9 ㎛로 나머지에 비해 작았다. 단위면적 당 기공의 수는 향축면과 배축면이 평균 40.2개, 149.2개이고, 양면 모두 Type 1이 66.3개와 177.2개로 가장 많았다. 화분은 모두 단립으로 삼구형이고, 극축 길이(P)와 적도면 지름(E)의 비율은 0.83~1.12로 모양은 아단구형~약장구형이다. 표면무늬는 과립상 표면에 자상 돌기가 있고, Type 3과 4에서만 유공상이 확인되었다. 이상의 결과에서, 솔체꽃 유형인 Type 1과 2가 잎 표면의 선상 모용 유무 및 기공의 수에 뚜렷한 차이를 보여 Type 1은 솔체꽃과는 다른 새로운 변종 또는 품종일 가능성이 있다고 생각된다. 또한 체꽃 유형인 Type 3과 4의 경우, Type 3의 잎 배축면에 털이 드물게 있으나, 두 유형의 화분 표면무늬가 동일하고, 다른 형질들도 모두 중복되어 연속적인 변이로 보이며, 구름체꽃 유형인 Type 5는 나머지 유형과 뚜렷이 구분되었다.

• The Korean Journal of Rheology
• /
• v.5 no.1
• /
• pp.85-92
• /
• 1993

수지이동 성형공정에서 수지가 섬유직조망에 함침될 때의 투과계수와 수지의 표면 장력으로 인하여 유동진전면에서 발생하는 모세관압을 실험적으로 측정하였다. 두 종류의 섬유조직망에 대해서 가공율이 증가함에 따라투과계수는 증가한다. 수지, 섬유 그리고 공기 가 서로 다른 세 개의 상을 구성함으로써 수지의 표면장력의 영향을 받는 비정상상태의 투 과계수가 수지의 섬유직조망에 포화된 정상상태에서 측정된 투과계수보다 본 실험에서 수행 된 모든 기공을 범위에서 크다는 것을 보여주었다. 수지 유동진전면에서 발생되는 모세관압 은 기공율이 감소함에 따라 증가하였고 섬유직 조망의 기공율이 0.469인 경우에는 금형입구 에서의 수지주입압력의 25%에 해당되는 모세관압이 발생되는 것으로 나타났다. 따라서 모 세관압을 가공조건으로 고려해다 한다는 것을 제시할수 있었다. 또한 본연구에서 사용된 임 의 배향 섬유직조망에 대해 실리콘 오일과 유리섬유 계면의 동적접촉각 측정을 통하여 섬유 배향 및 기공의 분포를 나타내는 형상인자의 값을 구함으로써 실제 RTM 공정에서 발생되 는 모세관압을 예측할 수 dLT는 기초자료를 제시하였다.

• Resources Recycling
• /
• v.26 no.6
• /
• pp.97-101
• /
• 2017

Metal foams have a cellular structure consisting of a solid metal containing a large volume fraction of pores. In particular, open pores which are penetrable pores are necessary for industrial applications such as in high temperature filters and as support for catalysts. In this study, Fe foam with greater than 90% porosity and 2-mm pore size was successfully fabricated using a slurry coating process and the pore properties were characterized. The Fe and $Fe_2O_3$ powder mixing ratios were controlled to produce Fe foam samples with different pore sizes and porosity. First, the slurry was prepared through the uniform mixing of powders, distilled water, and polyvinyl alcohol(PVA). The amount of slurry coated with the PU foam increased with increasing $Fe_2O_3$ mixing powder ratio, but the shrinkage and porosity of the Fe foams decreased, respectively, with increasing $Fe_2O_3$ mixing powder ratio.