• Korean Journal of Materials Research
• /
• v.8 no.2
• /
• pp.120-125
• /
• 1998

CO$_{2}$gas중에서 산화된 활성탄소섬유를 77K에서 질소흡착에 의해 흡착등온곡선을 구하였다. 미세공부피와 외부표면적은 t-법으로 구하였으며, 평균기공크기와 기공분포는 Dubinin-Astakhov법으로 구하여 기공발당과정을 고찰하였다. 산화반응 초기(약 40% burn-off까지)에 섬유내부에 발달하는 미세공은 burn-off가 40%를 넘으면 서서히 큰 미세공으로 성장하며, burn-off가 약 60%이상되면 미세기공은 확대 또는 합체되어 점차 중기공으로 성장하는 것으로 관찰되었다. 또한 고온산화반응으로 발달한 기공은 저온에서 생성된 기공보다 크다.

• Journal of Technologic Dentistry
• /
• v.43 no.2
• /
• pp.69-69
• /
• 2021

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.41 no.5
• /
• pp.337-343
• /
• 2017

As a shop practice, a strength estimation method for die cast parts is suggested, in which various defects such as pores can be allowed. The equivalent porosity is evaluated by combining the stiffness data from a simple elastic test at the part level during the shop practice and the theoretical stiffness data, which are defect free. A porosity equation is derived from Eshelby's inclusion theory. Then, using the Mori-Tanaka method, the porosity value is used to draw a stress-strain curve for the porous material. In this paper, the Hollomon equation is used to capture the strain hardening effect. This stress-strain curve can be used to estimate the strength of a die cast part with porous defects. An elastoplastic theoretical solution is derived for the three-point bending of a die cast beam by using the plastic hinge method as a reference solution for a part with porous defects.

• Journal of the Microelectronics and Packaging Society
• /
• v.23 no.4
• /
• pp.57-61
• /
• 2016

Thick film sealing glass paste is required for cell packaging of NaS based battery for energy storage system, to join the beta-alumina electrolyte tube and the alpha-alumina battery cell cap components. This paper presents the effect of the particle sizes of seal glass powder and the sealing temperatures on the microstructure of the glass sealants was investigated. It was found that the larger in the particle size of seal glass powder, the smaller the pore volume and the number of pores in a unit area. Also, the number of pores decreased with increasing the sealing temperatures while the pore size was increased. This result enables the control of porosity, pore distribution and number of pores in a microstructure of glass sealing component by proper selection of glass powders particle size and sealing temperature.

• Journal of Environmental Science International
• /
• v.4 no.4
• /
• pp.15-15
• /
• 1995

ABA and SA showed different effect on stomatal closing on same condition. The addition of 1 M salicylic acid to fully opened stomata resulted in a significant reductionn of 22 % in stomatal aperture. However, 1 mM ABA reduced 73 % of stomatal aperture. The light absorption spectra of the salicylic acid solution showed that SA was degraded within 1 hour. Therefore, SA solution was resupplied % the detached epidermis every 30 min. during incubation and it was found that even at 10 $mu$M SA induced stomatal closing significantly. Its effect was also greatly pH dependent. The reduction of stomatal aperture caused by 1 mM SA was most effective at lower pH (pH 7.2, 5 %: pH 6.2, 40 %; pH 5.2, 78 %). Therefore, if SA was properly treated to the epidermal strips in the medium, the effects of SA on stomatal closing were similar with those of ABA.

• Journal of Environmental Science International
• /
• v.4 no.4
• /
• pp.317-321
• /
• 1995

ABA and SA showed different effect on stomatal closing on same condition. The addition of 1 M salicylic acid to fully opened stomata resulted in a significant reductionn of 22 % in stomatal aperture. However, 1 mM ABA reduced 73 % of stomatal aperture. The light absorption spectra of the salicylic acid solution showed that SA was degraded within 1 hour. Therefore, SA solution was resupplied % the detached epidermis every 30 min. during incubation and it was found that even at 10 $\mu$M SA induced stomatal closing significantly. Its effect was also greatly pH dependent. The reduction of stomatal aperture caused by 1 mM SA was most effective at lower pH (pH 7.2, 5 %: pH 6.2, 40 %; pH 5.2, 78 %). Therefore, if SA was properly treated to the epidermal strips in the medium, the effects of SA on stomatal closing were similar with those of ABA.

• Resources Recycling
• /
• v.26 no.6
• /
• pp.97-101
• /
• 2017

Metal foams have a cellular structure consisting of a solid metal containing a large volume fraction of pores. In particular, open pores which are penetrable pores are necessary for industrial applications such as in high temperature filters and as support for catalysts. In this study, Fe foam with greater than 90% porosity and 2-mm pore size was successfully fabricated using a slurry coating process and the pore properties were characterized. The Fe and $Fe_2O_3$ powder mixing ratios were controlled to produce Fe foam samples with different pore sizes and porosity. First, the slurry was prepared through the uniform mixing of powders, distilled water, and polyvinyl alcohol(PVA). The amount of slurry coated with the PU foam increased with increasing $Fe_2O_3$ mixing powder ratio, but the shrinkage and porosity of the Fe foams decreased, respectively, with increasing $Fe_2O_3$ mixing powder ratio.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.5
• /
• pp.2979-2984
• /
• 2015

This paper has presented a new foaming technology of selective hybrid-structured polymer film with expanded pores. The porous structure of closed pore was firstly fabricated by applying the 355nm UV-pulsed laser to 0.1mm thick film that was uniformly mixed with PP pellets, copper powder, and CBA (Chemical Blowing Agent). In order to expand pore size of closed-cell shape, LAMO(Laser Aided Micro pore Opening) processing was conducted to heat the copper powder, and then the bigger pore size of closed-cell more than existing pore size was successfully formed because of rapid conduction of heated metal powder. From the experimental results, various process parameters such as laser fluence, intensity, scan rate, spot size and density of powder and CBA were considerably considered to reveal the correlation among the pore characteristics. In the future, a function experiment will be carried out to use the hybrid film of industrial applications.

• Clean Technology
• /
• v.24 no.4
• /
• pp.348-356
• /
• 2018

The adsorption equilibria of oxygen, nitrogen and argon on carbonaceous adsorbent with slit-shaped and randomly etched graphite (REG) pores were calculated by molecular simulation method. Reliable models of adsorbents and adsorbates for adsorption equilibria are important for the correct design of industrial adsorptive separation processes. At the smallest physical pore of $5.6{\AA}$, only oxygen molecules were accommodated at the center of the slit-shaped pore, and from $5.9{\AA}$ nitrogen and argon molecules could be accommodated in the pores. Slit pores showed higher adsorption capacity compared with REG pores with same averaged reenterance pore size due to dead volume and inaccessible volume in defected pores. And it was shown the adsorption capacities of oxygen and argon was same in larger pore size. From calculated adsorption isotherms at 298 K it showed that the adsorption capacity ratio of oxygen to nitrogen is increased as pressure is increased.

• Journal of the Korean Ceramic Society
• /
• v.39 no.10
• /
• pp.919-927
• /
• 2002

In order to fabricate double-layered porous materials powders of different particle sizes were pressed stepwise. Ford＇s equation which predicts the fired density with the change in pressed density was employed in order to adjust the difference in sintering shrinkage of the green body with double-layered porous structure. Double-layered porous materials were characterized by investigating microstructures and permeability. SEM micrographs showed the distinct difference in pore sizes of double-layered porous material. Permeability of single-layered porous material increased by increasing the starting particle sizes and porosity as well. Permeability of the double-layered porous material depends largely on the layer of small pore diameter.