• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.29 no.1
• /
• pp.36-41
• /
• 2018

This paper presents an implementation of a millimeter-wave(W band) multiflare-angle horn antenna. The proposed antenna is a multimode dual-polarized square horn having equal E- and H-plane beamwidths and consists of a multimode generating section, a four-square-waveguide exciter, orthomode transducers, and power combiners for the sum pattern formation. The antenna structure has been designed to allow for easy fabrication and the designed antenna has been fabricated to a precision of ${\pm}0.02mm$ by layer-by-layer machining and diffusion bonding. The input reflection coefficient and the radiation pattern of the fabricated antenna have been measured using a network analyzer and a far-field test facility. Measurements show that the proposed antenna has 17.7~18.3 dBi gain, $25.2{\sim}28.5^{\circ}$ beamwidth, and an input VSWR between 1.02~1.75, within ${\pm}0.5GHz$ from the center frequency.

• Journal of Environmental Policy
• /
• v.9 no.2
• /
• pp.21-39
• /
• 2010

In this paper, water consumption annually for industries in Korea was estimated for the first time and based on this, an input-output model was prepared for water consumption analysis. Also making use of this, the direct and indirect water consumption effect according to industrial activities was analyzed and the total effect based on volume was broken down into each factor. The amount of water consumed for industries in Korea (excluding agriculture, forestry and fishery) was estimated about 7 billion and 692 million ton in 2003(excluding sea water). Classifying by industry, the one for electric power & water service accounted for almost half, 49.5%, metalworking industry for 24.3% and chemical industry for 5.0%. As the result of estimation for the direct and indirect water consumption inducement coefficients, the amount of water consumed per the production of one million won ranked the highest for electric power & water service as 113.8 ton and the next highest ones ranked as 49.6 ton for the first metalworking, 16.8 ton for textile and leather goods, and 11.9 ton for general machinery respectively. In the meantime, as the result of breaking down into each factor of total amount of water consumed by industry, it appeared that the ripple effect having on other industries was more than the direct effect.

• Journal of Korean Society of Steel Construction
• /
• v.29 no.6
• /
• pp.479-486
• /
• 2017

Steel beams with corrugated web have been widely used in the steel structures. However, it is challenging to weld the section between the corrugated web and the flange straight, which increases the cost of production. In order to solve this issue, steel beam with intaglio and embossed web (It is called an IEB) was invented. A web with embossment is produced by cold pressing and welded to flange by automatic welding machine. The loading tests were conducted to investigate the load-carrying capacity of IEB, and its test result was compared with that of H-shaped beam having a same size of flange and web. The test results of IEB series showed about 40% higher load capacities than H-shaped series. As a result of comparing the IEB specimen with Eurocodes for steel beams with corrugated web, all of specimens tested in this study did not meet the design value. Therefore, it is difficult to apply existing formula to IEB and new design formula should be presented for field application.

• Korean Journal of Food Science and Technology
• /
• v.23 no.1
• /
• pp.88-92
• /
• 1991

To analyze the effects of the system parameters on the target parameters, which include the amount of water evaporation, water solubility index(WSI) and water absorption index(WAI), test trials of fractional factorial design of the three process variables at three levels were carried out for corn grit with a laboratory twin-screw extruder with three different screw configurations. The system parameters collected from the trials, such as extrusion temperature, specific mechanical energy input(SME) and mean residence time(RT), were showed the ranges of $129{\sim}182^{\circ}C$, $67{\sim}163\;kwh/ton$ and $12{\sim}34\;sec$, respectively. Within these ranges of the system parameters, the target parameters were able to be quantified by using multiple regression equations. The correlation of results with the system parameters blocked by the screw configuration as dependent variables, yield correlation coefficients above 0.90, and the correlation using the system parameters obtained from whole experiment system as the dependent variables yield correlation coefficients around 0.80. The functional relationship, which can be quantified by second order polynomial regression equation with only two system parameters within necessary degree of accuracy, can he graped in three dimensional surface response and contour diagrams.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.7
• /
• pp.677-687
• /
• 2017

Aircraft can often be exposed to a variety of environments and vibrations such as engine, hydraulic pump, aerodynamic force. These may cause cracking and destruction of the mechanical structure and sub-components by high-cycle fatigue. The axial piston type pump which is usually applied to the aircraft hydraulic pump can be necessarily accompanied by the fluid pulsation by continuous rotation of the axial piston. The fatigue crack was identified at the dampener fitting welding zone to prevent vibration damping during the running of aircraft equipped with this type of pulsation hydraulic pump. In order to understand the root cause of this matter, fracture and component analyses were carried out and also integral type dampener fitting was applied to prevent recurrence of the crack as a subject of design improvements. Structural integrity stress analysis, fatigue analysis, qualification test and aircraft system equipped test was conducted to verify the design validity in application to integral type dampener fitting. The test results were sufficiently satisfactory with the demand lifetime of the material from the various types of test as conducted and the subject of design improvement in this study could be objectively evaluated that shall be applied to the operational aircraft.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.11
• /
• pp.810-816
• /
• 2017

This study investigates the relationship between the damage patterns and structural performance levels of a multi-strand 7-wire strand that is used as an important member of stay cables. Stay cables are continuously damaged after completion, and corrosion is the main cause. However, it is difficult to check the damage pattern inside the cable due to its structural characteristics, and it is difficult to evaluate the degradation level of the damage quantitatively. This study derives the relationship between the damage pattern and the performance level of the stranded wire by comparing results and analyzing them through an indoor experiment and finite element analysis. In order to simulate the damage of a 7-wire strand, artificial damage was applied by mechanical precision machining to perform a performance evaluation. The results of the analysis show that regardless of the damage size of the strand, the structural performance deteriorated immediately after the damage. It was experimentally and analytically deduced that the type and amount of damage should be considered as a parameter for evaluating the performance level of the strand. This information can be used for the safety management of a cable stayed bridge by constructing a database according to the pattern and amount of damage.

• Journal of Fisheries and Marine Sciences Education
• /
• v.21 no.2
• /
• pp.237-246
• /
• 2009

In this research, there was an investigation about the objective and content domains concerning marine education in the Fish and Marine High School. Also, validity and guidance level on the classification were analyzed. According to the analysis, analyzing guidance level of Marine related contents which are included in school marine education is as follows. There are 971 information and knowledge domains, 710 skill domains, 5 value and attitude domains and 8 behavior and participation domains in the objective domain in school marine education. The number of the knowledge domains was most while attitude domains was least. Content domain of school marine education consists of 774 ocean human and marine ecology domains, 461 artificial marine environment and facility domains, 290 marine resource domains, 76 marine pollution domains, 123 marine conservation and measure domains. So, ocean human and marine ecology domains were most while ethics of marine conservation domains were not included.

• Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
• /
• 2002.05a
• /
• pp.46-48
• /
• 2002

본 연구는 신문지 고지의 점착성 이물질 중 Primary Stickies의 정 량에 관한 것으로 서, 실제 신문지료를 화상분석하여 실시간으로 매크로크기의 점착성 이물질올 측정할 때 효율적인 측정조건을 탐색하여 제지공정의 l 현장에서 일차 점착성 이물질을 정량 하는 새로운 측정기의 측정 기준을 제시하고자 하였다. 이물질이란 제지공정에 의도적으로 첨가되지 않은 불질의 총칭으로 dirt 및 각종 점착 성 이물질 즉, stickies를 들 수 있다. 이 가운데 스틱키{stickies}란 부드럽고, 점착성을 나타내는 이물질의 총청으로 주로 점착제와 확스에 의해 형성된다. 스틱키는 고지 재활 용의 효율성을 가장 크게 저해하는 이물질로 와이어, 펠트 및 기타 공정요소에 부착되 어 초지 시 지절을 발생시킴으로써 생산성을 저하시킬 뿐 아니라, 외관상 상품가치와 인쇄적성올 저하시키며, 최종 제품의 강도적 물성 및 가공적성에도 영향을 미친다. 특 히 국내에서는 원가절감을 위해 고지의 재활용율올 증대시키고자 전력을 다하고 있으 며 환경보호 및 용수 절감올 위해 공정수를 절감하고 궁극적으로는 무방류화를 목표로 하고 있어 토지 계 내의 점착성 이물질의 투입과 농축 현상이 심각하게 진행되고 있는 실정이다. 초지공정에서 발생하는 스틱키 즉 점착성 이물질은 미세한 스크린의 슬롯 폭인 0.15 - -0.3mm 이상의 크기를 가져 스크린에 의해 분리될 수 있는 매크로 스틱키{macro s stickies}와 이보다 작은 마이크로 스틱키(micro stickies)로 크게 분류된다. 즉 매크로 스틱키는 스크린에 의해 분리될 수 있으나 마이크로 스틱키는 스크린을 통하여 기계적 으로 분리할 수 없다는 문제점을 지니고 있다. 스틱키는 또 거동 특성에 따라 primary s stickies와 secondary stickies로 구분할 수 있다. primary stickies는 펄핑과정에서 점착 성 이물질이 파괴됨에 따라 나타나지만, secondary stickies는 지류 제지공정의 백수에 용해 되거나 분산된 상태인 1때1 이하의 콜로이 드로 폰재 한다. 이 러 한 secondary stickies 는 pH, 온도의 변화나 각종의 첨가제에 의해 웅집이나 홉착 등을 발생할 수 있는 잠재 적 문제점 등을 가지고 있다. 예를 들어 양성 고분자의 첨가는 펄프 섬유를 웅집시킬 뿐 아니라 지료에 함유된 secondary dtickies의 안정성을 저하시켜 응집, 침적시키는 작용을 한다. 따라서 분리가 어렵고, 제지공정에서 문제를 일으키기 쉬운 2차 스퇴키를 적절히 제어하기 위한 기술 개발은 용수절감 뿐 아니라, 초지공정의 침적물 절감을 통 한 공정개선에도 매우 중요한 요소기술이라 할 수 있다.

• Proceedings of the Korean Society of Postharvest Science and Technology of Agricultural Products Conference
• /
• 2003.04a
• /
• pp.117.1-117
• /
• 2003

새송이 버섯은 맛과 향이 좋고 영양적으로 우수하여 성인병 예방과 개선 효과가 있다고 알려져 있으나 재배농가의 급증으로 인한 가격하락과 집중출하로 신선도의 하락 등이 문제가 되고 있어 새송이 버섯의 활용성을 향상시키고, 소비자의 기호를 충족시킬 수 있는 버섯류 가공품 개발이 요구되고 있다. 전통절임식품을 응용한 새로운 버섯류 장류절임 가공법을 개발하기 위하여 절임 전 처리에 따른 품질특성을 비교하였으며, 이를 위하여 먼저 절임 전처리 조건으로 블랜칭처리, 적정 염농도와 처리시간 및 탈염법을 개발하고 건조 등의 전처리에 따른 품질 평가는 수분함량, 염도, 색상, 조직감, 관능특성 등을 평가하였다. 새송이 버섯을 전처리하기 위한 블랜칭 처리조건은 7$0^{\circ}C$에서 10분간 처리한 구가 조직감이 우수하고 갈변이 적었으며 염 침지시간은 침지 72시간까지는 증가하였으나 그 이후로는 증가하지 않았고 4$0^{\circ}C$에서 탈염하는 것이 가장 우수하여 전처리 조건으로 선정하였다. 전처리 방법에 따른 중량변화는 블랜칭 처리가 약 10% 정도 중량이 더 많았으며 이 영향은 건조 후에도 지속되었다. 수분함량도 블랜칭 처리가 높았으며 염도 또한 건조 처리에 따라 높은 함량을 보였으나 블랜칭 처리를 병행했을 경우 낮은 값을 나타내었다. 조직의 강도는 무처리에 비하여 전처리를 함에 따라 많은 힘이 소요되어 질긴 조직 특성을 나타냄을 알 수 있다. 관능평가 결과 블랜칭 처리를 단독으로 실시한 B(B)처리구가 관능적 특성치 모두 높은 값을 보여 전처리 방법으로는 가장 우수한 전처리 방법임을 알 수 있었다.저온 장시간 처리한 경우에 비하여 낮은 수준이지만 약간의 증감 경향을 보이다가 고른 평형 상태를 유지하였다. 산소 농도는 저온 장시간 처리 직후 급격히 저하된 후 다시 증가하였으며 저장 7일 후에는 4$0^{\circ}C$ 3시간 처리구를 제외하고는 평형 상태를 유지하였다. 고온 단시간 처리구의 경우 처리 직후부터 저장 7일 후까지 고른 평형 상태를 유지하였다. 에틸렌의 경우 저온 장시간 처리구는 처리 직후 그 농도가 급격히 상승하였다가 저장 1일 후부터 대조구보다 낮은 값을 나타내었다. 고온 단시간 처리구의 경우 저온 장시간 처리구와는 달리 저장 1일 후부터 그 농도가 다소 상승되었다가 다시 감소는 경향을 보였다. 한편 열처리하여 냉각시킨 직후 및 저장1주 후 사과의 pH, 산도, 당도, 경도, 과육의 갈변도 등을 조사하였던 바 대조구 및 처리구간에 일부 항목에 있어서는 약간의 차이를 나타내었다. 대치할 수 있을 것이라고 사료된다. 수분함량은 기계적 검사보다 관능검사와 더욱 높은 상관관계를 나타냈다.내었다. 항균활성이 우수한 생약재를 농도별로 활성을 조사한 결과, 물 추출물과 10% Ethanol 추출물 모두 낮은 농도에서도 우수한 항균활성을 나타내었다.취와 함께 점질성 갈변물질이 생성되었다. 이와 같은 결과로 볼 때, BAAG의 처리는 BAAC의 경우보다 가격은 저렴하면서도 항균력은 우수한 천연 항균복합제재로써 농산물 식품원료에 적용하여 선도유지 기간을 연장할 수 있는 효과를 기대할 수 있었다. 과일 등의 포장제로서 이용할 가능성을 확인하였다.로 [-wh] 겹의문사는 복수 의미를 지닐 수 없 다. 그러면 단수 의미는 어떻

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.19 no.6
• /
• pp.311-317
• /
• 2009

3Y-TZP block doped with $HfO_2$ and $CeO_2$ for dental ceramic block to the proliferation of CAD/CAM systems was prepared by heating at $800{\sim}1100^{\circ}C$ and then sintering at $1450^{\circ}C$. The influences of heating temperature and addition of $HfO_2$ and $CeO_2$ on the mechanical and chemical properties of 3Y-TZP block were investigated. Using the EDS mapping images, $HfO_2$ and $CeO_2$ was well dispersed in the 3Y-TZP matrix. 3 wt% $HfO_2$ doped block showed the optimum biaxial strength (1 GPa), while 3 wt% $CeO_2$ doped block enhanced the stability of $t-ZrO_2$ under hydrothermal atmosphere.