• Resources Recycling
• /
• v.11 no.1
• /
• pp.9-18
• /
• 2002

Printed wiring boards(PWBs) of the obsolete computers are composed of various organic and inorganic compounds as well as metals and alloys. As convinced that the valuable metals obtained from the PWBs are effectively utilized as secondary resources when recovered by economical methods, in this study, an investigation for characterizing the physical separation techniques is conducted. For the recovery of them, the sockets and chips dismantled from PWBs by scraping and residual resin boards are subjected to the appropriate separation processes according to the physical properties of each part. In the case of crushed socket scraps size ranged from -2.36 mm to +1.18 mm, approximately 97 wt% of the product obtained by magnetic separation consists of metallic compounds. In the case of chip scraps, 97% of Fe-Ni alloy and 95% of Cu metal are recovered by the combined process of air classification and dry magnetic separation in the size range from -2.36 mm to +0.15 mm. Ball milling is adopted in order to improve the removal efficiency of the thin-printed metallic materials on the residual resin boards and approximately 77% of Cu metal is recovered by zigzag separation after ball milling.

• Journal of Korean Society on Water Environment
• /
• v.28 no.2
• /
• pp.313-319
• /
• 2012

Various nanomaterials may flow into the aquatic ecosystem via production, use, and treatment processes. Especially, gold nanoparticles (AuNPs) were categorized as manufactured nanomaterials presented by the Organization for Economic Cooperation and Development Working Party on Manufactured Nanomaterials (OECD WPMN) in 2010. AuNPs have been used in medical area, however, they were reported to induce cytotoxicity and oxidative DNA damage, as well as down-regulation of the DNA repair gene in mice and human cell lines. In this study, the aquatic toxicity data of AuNPs and gold ions were collected, with the specific test methods analyzed with respect to the form and size of AuNPs, test species, exposure duration, and endpoints. Currently, aquatic toxicity data of AuNPs and gold ions have been presented in 14 studies including 4 fish, 6 crustacean, 2 green algae, and 2 macrophytes studies, as well as a further 8 studies including 4 fish, 4 crustacean, 1 platyhelminthes, and 1 green algae, respectively. The AuNPs were 0.8-100 nm in size, as gold nanoparticles, gold nanorod, glycodendrimer-coated gold nanoparticles, and amine-coated gold nanoparticles. The tested endpoints were the individual toxicities, such as mortality, malformation, reproduction inhibition, growth inhibition and genetic toxicity such as oxidative stress, gene expression, and reactive oxygen species formation. The accumulation of AuNPs was also confirmed in the various receptor organs. These results are expected to be useful in understanding the aquatic toxicity of AuNPs and gold ions, as well as being applicable to future toxicity studies on AuNPs.

• Journal of the Korean Electrochemical Society
• /
• v.10 no.2
• /
• pp.150-154
• /
• 2007

Redox complexes to transport electrodes from biomaterial to electrodes are very important part in commercial biosensor industry. A novel osmium redox complex was synthesized by the coordinating pyridine group with osmium metal. A novel osmium complex is described as $[Os(dme-bpy)_2(ap-im)Cl]^{+/2+}$. We have been studied the electrochemical characteristics of this osmium complex with electrochemical techniques such as cyclic voltammetry and chronoamperommetry. In order to immobilize osmium redox complexes on the electrode, we deposited gold nano-particles on screen printed carbon electrode(SPE). The electrical signal converts the osmium redox films into an electrocatalyst for glucose oxidation. The catalytic currents were monitored that the catalytic currents were linearly increased from 1 mM to 5 mM concentrations of glucose.

• Korean Journal of Materials Research
• /
• v.23 no.1
• /
• pp.53-58
• /
• 2013

Superhydrophobic $SiO_2$ layers with a micro-nano hierarchical surface structure were prepared. $SiO_2$ layers deposited via an electrospray method combined with a sol-gel chemical route were rough on the microscale. Au particles were decorated on the surface of the microscale-rough $SiO_2$ layers by use of the photo-reduction process with different intensities ($0.11-1.9mW/cm^2$) and illumination times (60-240 sec) of ultraviolet light. With the aid of nanoscale Au nanoparticles, this consequently resulted in a micro-nano hierarchical surface structure. Subsequent fluorination treatment with a solution containing trichloro(1H,2H,2H,2H-perfluorooctyl)silane fluorinated the hierarchical $SiO_2$ layers. The change in surface roughness factor was in good agreement with that observed for the water contact angle, where the surface roughness factor developed as a measure needed to evaluate the degree of surface roughness. The resulting $SiO_2$ layers revealed excellent repellency toward various liquid droplets with different surface tensions ranging from 46 to 72.3 mN/m. Especially, the micro-nano hierarchical surface created at an illumination intensity of $0.11mW/cm^2$ and illumination time of 60 sec showed the largest water contact angle of $170^{\circ}$. Based on the Cassie-Baxter and Young-Dupre equations, the surface fraction and work of adhesion for the micronano hierarchical $SiO_2$ layers were evaluated. The work of adhesion was estimated to be less than $3{\times}10^{-3}N/m$ for all the liquid droplets. This exceptionally small work of adhesion is likely to be responsible for the strong repellency of the liquids to the micro-nano hierarchical $SiO_2$ layers.

• Transactions of Materials Processing
• /
• v.11 no.8
• /
• pp.682-690
• /
• 2002

The formation of adiabatic shearband in tungsten heavy alloys(WHA) was studied in this investigation. Five prismatic specimens were loaded by high velocity impacts and treated as plane strain problems. To find out the effect of particle's volume ratio, specimens containing 81%, 93% and 97% volume percents of tungsten particles were used. Also the effects of particle's geometry and size on the formation of shearband were studied for 81% volume percent alloys by small size particle model, large size particle model and undulated particle models, and the results were discussed.be used to diagnose the causes of necking and fracture in industrial practice and to investigate whether these defects were caused by material property variation, changes in lubrication, or incorrect press settings. In non-axisymmetric deep drawing, three modes of forming regimes are found: draw, stretch, plane strain. The stretch mode for non-axisymmetric deep drawing could be defined when the major and minor strains are positive. The draw mode could be defined when the major strain is positive and minor strain is negative, and plane strain mode could be defined when the major strain is positive and minor strain is zero. Through experiments the draw mode was shown on the wall and flange are one of a drawn cup, while the plane strain and the stretch mode were on the punch head and the punch corner area respectively, We observed that the punch load of elliptical deep drawing was decreased according to increase of die corner radius and the thickness deformation of minor side was more large than major side.

• Korean Chemical Engineering Research
• /
• v.55 no.2
• /
• pp.253-257
• /
• 2017

Graphene is a monolayer carbon material which consists of $sp^2$ bonding between carbon atoms. Its excellent intrinsic properties allow graphene to be used in various research fields. Many researchers believe that graphene is suitable for electronic device materials due to its high electrical conductivity and carrier mobility. Through chemical doping, n- or p-type graphene can be obtained, and consequently graphene-based devices which have more comparable structure to common semiconductor-based devices can be fabricated. In our research, we introduced the dielectrophoresis process to the chemical doping step in order to improve the effect of chemical doping of graphene selectively. Under 10 kHz and $5V_{pp}$ (peak-to-peak voltage), doping was conducted and the Au nanoparticles were effectively formed, as well as aligned along the edges of graphene. Effects of the selective chemical doping on graphene were investigated through Raman spectroscopy and the change of its electrical properties were explored. We proposed the method to enhance the doping effect in local region of a graphene layer.

• Applied Microscopy
• /
• v.28 no.2
• /
• pp.193-205
• /
• 1998

The Urechis unicinctus sperm and spermatogenic cells prepared from the testis are investigated to identify $\alpha-tubulin$ of axoneme microtubules using mouse monoclonal $anti-\alpha-tubulin$ as the first Ab and Gold(10nm) conjugated goat anti-mouse IgG as the Ab marker. The Ag-Ab reaction analyzed excellently the localization of $\alpha-tubulin$ and the gold particles incorporated with the proximal and distal centrioles, manchette microtubules, and flagellum. The gold particles can be also observed in the spermatogenic cells while the cells are still in sperm ball which is composed of a somatic cell and spermatogenic cells. The sperm ball is the functional unit of sperm production in U unicinctus testis. The spermatids are developed from the spermatogenic cells in the sperm ball and released into the testis cavity through a cortical cytoplasmic opening. The spermatid architectures are similar with the mature sperm of the testis cavity in aspects of shape of discoid acrosome, degree of nuclear condensation and ring type of mitochondrion. However, the distal centriole connecting with the flagella can be observed from the mature sperm while the both proximal and distal centrioles reveal only in the spermatids. The proximal centriole is directly connected with nuclear outer membrane during the stage of nuclear condensation and oriented perpendicularly to the distal centriole whose axis coinciding with the longitudinal axis of the spermatozoon. There are indications that the distal centriole is intimately associated with the polymerization of the flagellum. The manchette microtubules appear during spermatid development but the mature sperm have round head and no conspicuous middle piece.

• Korean Journal of Dental Materials
• /
• v.44 no.1
• /
• pp.33-41
• /
• 2017

In this study, we prepared PLA-tetracycline complexes coated gold nanoparticle-titania nanotubes and estimated their infrared LASER mediated drug release in the abdominal region of ICR mouse. The results of UV-Vis spectrophotometer showed the highest absorbance at the wavelength of 530 nm and 809 nm indicating the existence of gold nanoparticles. EDX analysis showed that the amounts of gold nanoparticle coated on titania nanotubes were approximately 3.62-36.5 wt%. In vivo test resulted that the tetracycline release value of experimental groups (6.5 ng/mL) was higher than that of control group (5.8 ng/mL) on the condition of 30 minutes of LASER irradiation. Therefore, it is expected that PLA-tetracycline complexes coated gold nanoparticle-titania nanotubes have the feasibility in the field of infrared remote controlled drug device and overcome the limitation of location and time of drug release in dental implant.

• Journal of Radiation Industry
• /
• v.6 no.2
• /
• pp.139-145
• /
• 2012

Gold nanoparticles (GNPs) have led to the development of a new field in the diagnosis and treatment of diseases such as cancer. An efficient synthesis of gold nanoparticles within the range of 8~57 nm was established by ${\gamma}-ray$ irradiation. The good point of a radiation-based method is the production of gold nanoparticles with a higher concentration and narrower size distribution compared with conventional methods. The size of gold nanoparticles was controlled using two methods. : (i) varying the ${\gamma}-ray$ irradiation dose of 10 to 25 kGy and (ii) varying the concentration of $HAuCl_4$ solution from 4 to 40 mM. In addition, the GNPs were radiolabeled using $[^{125}I]NaI$ in a simple and fast manner with high yields. The produced gold nanoparticles were characterized using a transmission electron microscopy (TEM), a UV-visible spectrophotometer, and a radio-TLC imaging scanner. From these results, these radiolabeled GNPs can be applicable for a radioisotope tag of biomolecules.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2015.05a
• /
• pp.305-305
• /
• 2015

도심지에서의 우수관거시스템의 경우 적정 설계빈도 기준에 따라 유입량에 따른 적정 통수능을 확보할 수 있도록 설계되고 있다. 유입량에 동반되는 토사량의 경우 관내 퇴적 방지를 위한 적정 설계유속 조건 반영을 통해 관내 퇴적이 이루어지지 않도록 고려하고 있다. 그러나 2011년 7월 우면산 토사피해, 2014년 8월 금정산 토사피해와 같이 실제 발생한 주요 침수피해들의 경우 다양한 피해발생 원인들 중 관로 내 토사퇴적에 따른 우수관로의 통수능력의 저하되는 문제점이 지적되었다. 설계 시 적절히 고려하지 못한 토사의 유입은 관내 토사 퇴적으로 이어지고 결과적으로 통수단면 저하에 따른 월류발생 및 도심지 내 침수피해가 발생으로 이어지게 된다. 따라서 이러한 문제를 해결하고 기존 관거의 통수능력을 적절히 확보하기 위해서는 관거 내의 퇴사량에 대한 분석과 이를 고려한 관로 설계가 필수적이다. 도시유역에서 일반적인 우수관거로 유입되는 토사의 경우 산지유역과 달리 비교적 작은 입경을 가진 토사들로 구성된다. 즉, 유입되는 토사량에 있어 입경의 적정 크기 및 분포에 따라서 관거내 토사 퇴적량이 달라지게 되며 이를 해소할 수 있는 유속 범위에 대한 분석이 필요하다. 본 연구에서는 토사 입경별 관내 유속에 따른 퇴적양상을 검토하기 위하여 특정 제원의 관거 및 우수관거로 유입되는 토사의 입경들을 기준으로 관내 수심의 변동에 따른 우수관거를 지나는 각입자별 부유 퇴적의 기준이 되는 한계유속 조건을 산정하였으며, 이를 고려한 관거의 경사도 조정을 통해 설계유량에 따른 관거 내 토사퇴적량 변화를 살펴보았다. 이때, 관로내에 일정량의 토사가 지속적으로 유입되는 것으로 가정하였으며, 유입되는 토사의 입경을 0.1mm~30.0mm까지 세분화하여, 유입되는 토사 전량에 대한 입경을 하나의 입경으로 고정시킨 조건으로 관내 유속에 따른 퇴적 양상의 변화를 검토하였다. 향후 해당 조건을 반영한 설계방안의 경우 설계강우에 대한 고려를 통하여 신뢰도 측면에서 관거내 토사의 퇴적과 유속 관계에 대한 분석을 바탕으로 이루어져야 하며, 이를 통하여 일반적인 관거의 설계 기준이 수립될 필요가 있다고 판단된다.