• Journal of the Korea Academia-Industrial cooperation Society
• /
• 제6권5호
• /
• pp.391-395
• /
• 2005

This paper has comparatively analyzed the characteristics of the machined surface of a specimen made by machining Die Steel STD11 and a specimen obtained by W-EDM steel. If a press die is manufactured through W-EDM, products of shapes that cannot easily be made through machining can be manufactured easily. However, the life of the press die is significantly reduced compared with the press die made through machining. This is believed to be caused by the deformed layer that has occurred on the surface of the press die that was made through W-EDM. The roughness of the 2 specimens was measured, and it was learned that the distribution of the roughness of the specimen made through the 1st W-EDM was rough. When the specimens were observed using a scanning-electron microscope, there was significant difference between the surface and the cross-section of the 2 specimens, while the cross section of the specimen obtained through W-EDM had the tempered and quenched surface structure which exists in the form of a deformed layer.

• Journal of the Korean Society for Precision Engineering
• /
• 제17권7호
• /
• pp.36-44
• /
• 2000

X-선 사진식각공정(이하 LIGA 기술이라 함)을 이용한 초소형, 초정밀 금형 및 3차원 구조물 제작 가공기술은, 생산기반 기술 중 금형기술 및 가공기술 분야에 해당하는 기술로 포항가속기와 같은 방사선 가속기에서 생성되는 수 보대 파장의 X-선을 이용하는 기술이다. 짧은 파장을 사용하는 연유로, 일반 반도체 공정으로는 실현할 수 없는 높고, 광학적 용도까지 가능한 거울정도의 벽면 거칠기(수백${\AA}$이하)를, 그러면서도 서브 마이크론의 정밀도 (1$\mu\textrm{m}$이하)를 가지는 금형 및 3차원 구조물을 일괄 가공할 수 있는 기술이다.(중략)

• Transactions of the Korean Society of Mechanical Engineers A
• /
• 제25권2호
• /
• pp.312-322
• /
• 2001

This paper investigates the combined effects of parameters such as die surface finish, die directionality of stoning contact pressure and draw speed on the resulting coefficient of friction. Also, this study show the correlation between the NN(Neural Network) and DOE(Design of Experiments) to reduce the number of experiments without the loss of the effects of parameter upon coefficient of friction. The experiments were run in random order with at least three replicates. It was found that the directional stoning orthogonal to the pulling direction is lower friction than directional stoning parallel to the pulling directi on using FCD55 die and SPCEN.

• The Optical Journal
• /
• 통권96호
• /
• pp.49-54
• /
• 2005

프로젝션 TV, 비디오 카메라나 CD 등과 같은 전자 광학((Electro-optics) 제품 시장이 확대되고 있다. 이들 제품의 광학 부품을 소형경량화·고성능화·저가격화 하기 위해 각 제조업체에서 독자적인 비구면 가공 기술을 개발하고 있으며, 종전의 유리 렌즈에서 좀더 가벼운 플라스틱 렌즈로 이동하고 있다. 이 광학 부품들의 요구 정밀도는 형상 정밀도, 면 거칠기 모두 요구값이 높아지고 있으며 초정밀 비구면 경면 절삭 기술이 이용되고 있다. 본 고에서는 프로젝션 TV 및 비디오 카메라의 비구면 플라스틱용 금형을 대상으로 무전해 니켈 도금막의 초정밀 경면 절삭 기술에 대해 소개한다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• 제20권1호
• /
• pp.290-296
• /
• 2019

Head-up displays for vehicles play an important role in displaying various information about the safety and convenience of driving on the windshield of the vehicle. In this study, ultra-precision machining was performed and evaluated as a method for machining a large-area aspheric free-form mirror that is applicable to augmented reality technology. Precision diamond cutting is highly accurate and suitable for the production of advanced parts with excellent surface integrity, low surface roughness, and low residual stress. By using an aspheric free-form mold, it is possible to improve the optical transfer function, reduce the distortion path, and realize a special image field curvature. To make such a mold, the diamond cutting method was used, and the result was evaluated using an aspherical shape-measuring machine. As a result, it was possible to the mold with shape accuracy (PV) below $1{\mu}m$ and surface roughness (Ra) below $0.02{\mu}m$.

• Design & Manufacturing
• /
• 제8권2호
• /
• pp.12-17
• /
• 2014

Currently, injection molding process is a very useful technique that be applied to many field. And injection molding technology has been commercial based on many studies. However, there is no standard of surface roughness because there are few studies about surface technology of injection product. In addition, when designing the mold, changes of the core surface and the injection conditions are not considered. In this paper, change of surface according to the core and the injection conditions was compared with the surface of the injection product. Accumulation of these technologies will propose direction in mold design, manufacturing and injection molding technology.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• 제15권4호
• /
• pp.1844-1849
• /
• 2014

Existing measurement methods using microscopes or surface roughness measurement instruments for surface control in manufacturing die are low in their efficiency when they are applied in industrial fields due to structural problems. Therefore, it is very important to develop a measurement and analysis system which can enhance efficiency in the measurement of different-sized manufacturing dies and provide quality control regardless of location. This study aimed at the development of a portable surface measurement system to satisfy this need. This measurement system was designed and manufactured in such a way as to divide it into three parts: the Base, the Body, and the Optical system. As a result of testing the system, the surface roughness was measured with an accuracy between 94.9 and 99.9%, and the deviation in the measurement value of a circle was within $2{\mu}m$.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 한국정밀공학회 1997년도 추계학술대회 논문집
• /
• pp.870-874
• /
• 1997

Super-abrasives such as diamond and CBN have used to maintain accuracy and form deviation for superalloy etc. This study contains the dry cylindrical grinding of metals with resinoid-bond CBN wheel. For various conditions of grinding speed, workpiece speed, grinding depth and feed speed of table, the grinding resistance and the surface roughness are measured and discussed. The results are as follows.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• 제7권4호
• /
• pp.738-742
• /
• 2006

In this study we developed the electrical heating mold core by applying three different heating methods. In order to find out the optimal heating method, we observed the temperature profiles with time. We also injection-molded the parts by the heating methods and investigated the shrinkage ratio, density, surface roughness and weld-lines. The temperature rise time and cycle time showed the promising results for commercial applications(the rise time is $130^{\circ}C$/14sec, the cycle time is 55sec). By comparing with the conventional and gas flame heating method, the parts by this method were proven to have good qualities. The shrinkage ratio reduced by 5.1%, the density increase by 2.66%, the smoothness increased about 3 times, and the weld-line did not observed by naked eyes.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• 제16권6호
• /
• pp.7-14
• /
• 2017

This study manufactured a minimum quantity lubrication (MQL) supply system and identified the optimal MQL machining cutting conditions for plastic mold steel (SCM440). A series of experiments were consisted of twice. Optimal cutting conditions were derived using the Taguchi method, and cutting force variance; surface roughness; tool wear; and cutting temperature in dry, wet, and MQL machining were measured experimentally for these optimal conditions. The measured results decreased from dry to wet and MQL machining, being particularly large for dry machining due to increased cutting time. Measured MQL machining metrics were similar to those for wet machining, particularly for surface roughness, which is an index of machining quality.