• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.16 no.8 s.99
• /
• pp.797-802
• /
• 2005

In this paper, we design a UHF band RFID tag antenna which is conjugate matched to an impedance of a chip and also mountable on conductive materials. The proposed tag antenna is very compact($50{\times}30{\times}4mm$) with a modified PIFA shape. The proposed tag antenna has an advantage of easy matching to various chip input impedances. The performance of the antenna is evaluated by monitoring RCS in the reader direction. The RCS of the designed tag is $-10.2\;dBm^2$ when the chip is shorted and is $-21\;dBm^2$ when the chip impedance is a complex conjugate of the antenna impedance.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.20 no.9
• /
• pp.823-828
• /
• 2009

A small UHF RFID tag antenna for a key-chain installed inside of a metallic key-management cabinet has been designed. The tag antenna has been designed as small size as $66\;mm{\times}6\;mm$ with consideration of coupling among the tag antennas and metallic parts of key-chain and cabinet. The tag antenna is fabricated with a meander line dipole using T-matching method with FR-4 substrate. One tag antenna has been designed with consideration of coupling of adjacent tag antennas, and the other has been designed for the location close to the metallic part in the cabinet. The characteristics of tag antennas and reading distance have been analyzed based on the different numbers of adjacent tag antennas. As a results, the 360 tag antennas installed in the cabinet have been successfully recognized.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.11B
• /
• pp.1272-1282
• /
• 2009

This paper consists of two parts: the protocol for tag-to-tag mesh network and the implementation of dual-radio RFID system. Recently, RFID has been adopted in ports or warehouse, being attached to containers and palettes for loading/unloading automation. However, the RFID system has encountered one problem - some tags cannot receive any command from reader intermittently due to signal interference by containers or field equipments (e. g. cranes and yard tractors). This area where reader signal cannot reach is called dead-zone. The proposed method for solving the dead-zone problem is as follows. A zone which can be communicated directly between readers and tags communicates in 433MHz frequency band in compliance with ISO/IEC 18000-7 standard. On the other hand, dead-zone communicates in 2.4GHz frequency band by using tag-to-tag mesh network in compliance with IEEE 802.15.4 standard. The proposed method can not only save much cost to install additional readers but also help resolve the dead-zone problem. Furthermore, it can provide the easier, faster, and more economical network infrastructure.

• Proceedings of the KIEE Conference
• /
• 2008.04a
• /
• pp.41-42
• /
• 2008

무선방식으로 원격에서의 인식으로 정보교환을 가능하게 하는 RFID(Radio Frequency IDentification) 시스템은 태그 내의 배터리 유무에 따라 수동형과 능동형으로 구분된다. 수동형 태그는 판독기로부터 받은 RF 신호를 에너지로 이용하기 때문에 인식거리가 짧으며, 가격이 싸고 반영구적으로 사용할 수 있는 장점이 있다. 반면에, 능동형 태그는 금속재질에 취약한 수동형의 단점을 극복하는 동시에 인식거리가 길고, 인식률이 좋은 장점이 있다. 따라서 항만물류나 국방 분야에서 능동형 RFID 시스템에 대한 개발이 점차 확대되고 있다. 하지만 동일한 표준으로 개발된 제품의 서로 간에 인식이 불가능한 사례가 보고되고 있으며, 국제적으로 정확한 평가방법 및 장치가 정립되지 않아 개발된 제품들 간의 상호 운용성 및 표준 적합성 평가에 대한 어려움이 존재한다. 본 논문에서는 능동형 RFID 시스템의 적합성 평가를 위한 에뮬레이터의 하드웨어 및 소프트웨어를 설계하고 제작하였다. 설계된 장치는 Matlab의 Simulink를 통한 시뮬레이션으로 성능을 분석하였고, 실제 능동형 RFID 태그의 표준적합성 평가를 통해 에뮬레이터의 적용 가능성을 검증하였다.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.19 no.11
• /
• pp.1265-1271
• /
• 2008

In this paper, we propose a new antenna design method for RFID tass on metallic surfaces using a low-cost, high-loss substrate such as FR4. The proposed design method highly reduces the substrate loss due to its dielectric loss, and so improves the radiation efficiency of the tag antenna more than double compared with a conventional PIFA(planar inverted-F antenna). The equivalent circuit model of the antenna according to the proposed method was established and its characteristics were analyzed systematically in this paper. The excellency of the proposed design method was verified by the fabrication and measurement of a prototype antenna.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.18 no.1 s.116
• /
• pp.31-36
• /
• 2007

In the RFID system, one of the important criteria of tag antenna performance is the detection distance. The most important factor determining the detection distance of the tag antenna is the Radar Cross Sections(RCS). In this paper, we propose a method to simply measure the RCS of the RFID tag antenna using two reader antennas(Tx and Rx) and a network analyzer. We estimate RCS' from the RCS equation based on the measured $S_{21}$ using the network analyzer. We compare the measured $S_{21}$ values with the calculated $S_{21}$ values and the simulated $S_{21}$ values using EM simulator. The used tag antennas are two kinds of dipole-type, metal-type, and an inductively-coupled type ones. In case of the dipole type, the measured, simulated and calculated values of the RCS are almost the same. In case of other types, we obtain the measured RCS values with a difference of about 3 dB.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.38C no.11
• /
• pp.966-971
• /
• 2013

This paper introduces development of a Military Entrance Control System using the developed military insignia UHF RFID tags. Generally, in the military entrance control system, the security identification (ID) card with HF RFID tag can be used, to increase the security level, the developed insignia UHF RFID tags are used in the enforced military entrance control system. The general metal insignias, have been worn on a hat or on the shoulder pads of a military uniforms, are simulated and developed as UHF RFID insignia tags. The military entrance control system can manage the name, rank, address (information of military personnel), time and date of entrance and the history of entrance of the security area.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2007.11a
• /
• pp.874-877
• /
• 2007

최근 건설 산업이 고도화, 지능화됨에 따라 건설자재정보의 효율적인 관리방안으로 RFID 기술을 이용하려는 연구 및 적용 사례가 증가 하고 있다. RFID(Radio Frequency Identification)란 라디오 주파수를 이용한 무선인식 기법을 뜻하는 것으로 건설자재에 RFID Transponder(이하 태그)를 부착하여 생산, 유통, 설비 등 전 과정의 정보 추적 및 관리가 가능하다. 그러나 RFID 시스템 특성상 전자기장이 형성되는 철골자재나 수분이 포함된 콘크리트, 도료(안료) 등의 자재에서는 RFID 적용이 쉽지 않다. 또한, 현재 사용 중인 RFID 장비마저도 표준화 되어 있지 않고 사용 주파수 대역 또한 각각 다르기 때문에 건설자재에 적용하기위한 RFID 시스템의 표준화 및 규격화가 절실하다. 본 논문에서는 건설자재에 RFID를 적용하기 위한 표준화 방향을 제시하는 기초 연구로써 목재, 철재 빔, 도료(안료), 콘크리트, 배관자재(철/동/PE)에 Passive Type의 일반(Pager) 태그, 금속 태그, 액체형 태그를 부착 매립하여 125KHz, 13.56MHz, 900MHz의 주파수 대역과 자재 물성별 인식거리 및 인식률 시험을 진행하여 건설자재에 RFID를 적용하기위한 표준 주파수 대역 및 재질에 따른 적정 태그를 제시하고자 한다.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.11 no.3
• /
• pp.23-30
• /
• 2012

In this paper, we propose a new near-field reader antenna for 900 MHz RFID. The proposed antenna consists the micro-strip antenna with the periodic structure. The overall dimension of the antenna is $313mm{\times}152mm{\times}14mm$. The antenna has the uniform E-field distribution in near field region and the heart-shaped radiation beam pattern (Peak gain=-2 dBi). The transmitted power range is from 17 dBm to 23 dBm. We focus on minimizing the detected error by suppressing the reflected power from the metal, which is attached to the surface by tag, and by reducing the transmitted power from tag.

• Korean Journal of Construction Engineering and Management
• /
• v.9 no.1
• /
• pp.176-186
• /
• 2008

The radio frequency identification (RFID) technology allows various forms of applications in many industries including construction. and in Korea, RFID has already been adopted for the use in daily labor control, logistics monitoring of ready-mix concrete, supply chain management of long-lead items, such as structural steel members and curtain walls. Even though RFID tags have varied reading performances depending on various factors including material of tracking target and surrounding environment, there is no information on how much the reading performance of an RFID tag can be achieved against a specific construction components or materials. Therefore, the objective of this research is to identify the actual reading performance of various RFID technologies and to derive a method to maximize the reading performance for the use in the supply chain management process of curtain wall components.