• Proceedings of the Materials Research Society of Korea Conference
• /
• 2009.11a
• /
• pp.17.1-17.1
• /
• 2009

발포금속은 1948년에 Sosnik에 의해 알루미늄에 수은을 증발시키는 방법으로 발포 알루미늄을 제조한 이래, 1951년 Elliot에 의해 진보된 방식인 발포 매개체를 용탕에혼입하는 방법으로 발포금속을 제조하기 시작하였다. 현재 이들 선진국가의 생산방법 및 현황은 균질 기공의 조절, 연속주조 방식과 원가절감, 그리고 제조기술의 진보를 통하여 다양한 분야에 적용되고 있다. 그러나 실용화를 위해서는 요구특성을 만족하고 동시에 가격 경쟁력을 가진 제조기술의 보유 및 개발과 독특한 특성을활용한 새로운 적용 분야의 개척이 필요하다고 생각되며, 이를 위해 Harvard, MIT, Aachen, HMI 등 구미 유수 대학과 NASA, 미국방성등의 연구기관, ERG, 신강(新鋼) wire등 산업체를 중심으로제조 및 특성평가에 관한 기초연구와 활용방안이 활발히 모색중에 있다. 그리고 일부 자동차 생산 업체를중심으로 발포금속을 적용한 초경량, 에너지 절감형의 자동차 부품 소재,항공기 방열판 등에 대한 연구가 활발하게 진행되고 있다. 특히 금속 기체의 GASAR 공법은 Lotus 공법으로 Osaka 대학에서 개발되어 열교환기, 항공기, 방열기 등으로 응용이 확대되고 있다 국내에서 완제품생산은 실내장식용 복합패널로서 한소 프라임이 운영상의 문제로 생산을 중단하였으며, 유닉슨(주), 금강(주)에서 Batch식, 금성산업에서 Pot식이 일부 생산 및 연구가 진행되었으나 현재는 본연구실의 협조로 (주) 폼텍에서 발포패널을 주로 생산하고 있고 (주)드림메탈과 (주)아크로폼텍에서일부 생산되고, (주)동일알루미늄에서는 폐 scrap을 이용한 발포 Al 제조가 연구단계에 있다. 생기원에서는 분말 가열 흡음패널이 개발되었으나 강도와 내열성이 낮아 이들 특성을 향상시크는 연구가 진행중이다. 이들 제품은 성능상으로는 동양강판의 흡음패널과 KIMM의 필터용은연구개발이 낮은 수준이며, 본 연구팀과 공동 개발한 (주)폼텍의 복합패널은 10여 가지의 실용특허로 건축마감재로서 오히려 선진국수준을능가한 상태이다, 한편, 발포금속 기능성 개발은, 이들이 가지고 있는 우수한 특성 때문에 군수용으로부터 민수 산업용까지 전분야에 적용이 가능한 소재이므로 수요처를확장하고 있으므로 제품의 균질성, 안정성과 기능성 개발 향상을 위해 지속적이고 체계적인 연구가 필요하다고 생각된다.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.19 no.7
• /
• pp.26-31
• /
• 2005

In this paper, a small BPF(band pass filter) is designed using new probe type for wireless communication system. The dielectric resonator is used high Q ceramics for low loss characteristic. In order to provide a band pass filter which can be reduced in dimension, can be reduced in height, and can be surface-mounted. The filter was fabricated using $TE_{01{\delta}}$ mode dielectric resonator. The input/output probes are attached to coner portion of the rectangular metal cavity. Results of the manufactured filter($12{\times}12{\times}8[mm]$) show that the center frequency is 9.95358[GHz], the insertion loss is -1.9[dB], the 3[dB]_bandwidth is 14.9[MHz], and the loaf Q is 664.

• Journal of the Korean Society of Radiology
• /
• v.16 no.1
• /
• pp.15-23
• /
• 2022

3D printing technology is being used in various fields such as medicine and biotechnology, and materials containing metal powder are being commercialized through recent material development. Therefore, this study intends to analyze the photon spectrum during added filtration using 3D printing material during diagnostic X-ray examination through simulation. Among the Monte Carlo techniques, MCNPX (ver. 2.5.0) was used. First, the appropriateness of the photon spectrum generated in the simulation was evaluated through SRS-78 and SpekCalc, which are X-ray spectrum generation programs in the diagnostic field. Second, photon spectrum the same thickness of Al and Cu filters were obtained for characterization of 3D printing materials containing metal powder. In addition, the total photon fluence and average energy according to changes in tube voltage were compared and analyzed. As a result, it was analyzed that PLA-Al required about 1.2 ~ 1.4 times the thickness of the existing Al filter, and PLA-Cu required about 1.4 ~ 1.7 times the thickness of the Cu filter to show the same degree of filtration. Based on this study in the future, it is judged that it can be utilized as basic data for manufacturing 3D printing additional filters in medical fields.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.32 no.8
• /
• pp.617-623
• /
• 2008

The membrane filter adhered with nanostructured porous layer was made by heat treatment after deposition of nanoparticle-agglomerates sintered in aerosol phase onto a conventional micron-fibrous metal filter as a substrate filter. The Sintered-Nanoparticle-Agglomerates-coated NanoStructured porous layer Membrane Filter (SNA-NSMF), whose the filtration performance was improved compared with the conventional metal membrane filters, was developed by adhesion of nanoparticle-agglomerates of dendrite structure sintered onto the micron-fibrous metal filter. The size of nanoparticle-agglomerates of dendrite structure decreased with increasing the sintering temperature because nanoparticle-agglomerates shrank. When shrinking nanoparticle-agglomerates were deposited and treated with heat onto the conventional micron-fibrous metal filter, pore size of nanostructured porous layer decreased. Therefore, pressure drops of SNA-NSMFs increased from 0.3 to 0.516 kPa and filtration efficiencies remarkably increased from 95.612 to 99.9993%.

• Proceedings of the SAREK Conference
• /
• 2004.06a
• /
• pp.59-59
• /
• 2004

• Journal of the Korean Society for Nondestructive Testing
• /
• v.23 no.3
• /
• pp.280-284
• /
• 2003

The field application of acoustic emission(AE) testing for brand-new metal pressure vessel were performed. We will introduce the test procedure for acoustic emission test such as instrument check distance between sensors, sensor location, whole system calibration, pressurization sequence, noise reduction and evaluation. The data of acoustic emission test contain many noise signal, these noise can be reduced by time filtering which based on the description of observation during AE test.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.43 no.9 s.351
• /
• pp.64-68
• /
• 2006

Novel system-on-package (SOP) - D technology to improve the mechanical and thermal properties of a MCM-D substrate was suggested. Based on this investigation, the two types of band pass filters for the V-band application with unique structure were designed and implemented using 2-metals, 3-BCB layers. The first type using distributed resonator had the insertion loss below 2.6 dB at 55 GHz and group delay was below 0.06 ns. For the second type with edge coupled structure, the insertion loss and group delay were 3 dB and 0.1 ns, respectively. Suggested MCM-D substrate with band pass filter can be used to evaluate mm-Wave system including flip-chip bonded MMIC.

• Korean Journal of Optics and Photonics
• /
• v.35 no.1
• /
• pp.24-29
• /
• 2024

We propose a hyperbolic metastructure based on a nanopatterned metal (Ag)-dielectric (PDMS) multilayer and report on its performance in an infrared (IR) cut-off filter for imaging devices. By optimizing the size of the square-shaped Ag nanopattern and the thickness of PDMS surrounding the Ag nanopattern, the proposed IR cut-off filter blocks 99% of light in the 0.70-1.01 ㎛ wavelength band while maintaining a high transmittance of over 94% in the visible region. Here, the cut-off wavelength band starts at a region above the epsilon-near-zero wavelength of the hyperbolic metastructure and ends at the point where plasmonic absorption appears strongly. It is observed that transmittance in the wavelength region longer than the IR cut-off band increases again due to plasmonic coupling among horizontally adjacent Ag nanopatterns. This metastructure can improve the performance of IR-blocking filters as well as allow it to be manufactured ultra-thin, which is applicable to various planar optical elements and integrated optical components.

• Particle and aerosol research
• /
• v.12 no.3
• /
• pp.95-102
• /
• 2016

Controlling exposures to occupational hazards is important for protecting workers. Certified facepiece respirators are recommended when engineering controls do not adequately prevent exposures to airborne nanomaterials. The objective of this study is to carry out the experimental performance test to investigate the fractional efficiencies of the filter media for two grades of facepiece respirators. Experimental performance evaluations were carried out for the test NaCl particles and silver nanoparticles. For media of respirator filter, the penetration of NaCl particles was less than 5% and the most penetrating particle size occurred at about 40 nm. For silver nanoparticles, the most penetrating particle size was about 20nm with higher efficiency than those of NaCl particles. Charge characteristics of airborne nanoparticles is important because the media of respirator filter is made by the electret filter media.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.8A
• /
• pp.962-971
• /
• 2004

In this paper, we present the numerical analysis method for analyzing scattering characteristics of a rectangular waveguide with the conducting half cylinder using the mode matching method and compute scattering characteristics of a waveguide according to the rotation and changing radius of the half cylinder. Also, in conjunction with the generalized scattering method, the proposed method can be easily applied to a rectangular waveguide with cascade structure of conducting half cylinders. From the simulated result of a two pole filter, resonance frequency could be controlled by the rotation of half cylinders. The simulated result shows good agreement with the HFSS's result. The proposed structure and analysis method are easily applied to the design of waveguide components with conducting half cylinders.