• Journal of the Korean Institute of Gas
• /
• v.15 no.5
• /
• pp.19-24
• /
• 2011

Due to the latest industrial flow comes mainly switch to high-tech industries, combustible metals as Al, Mg, Li, Zn more require to use for the aircraft, car, cell phones, electronics and others. As a result, Increasing the processing of combustible metals due to increase in amount of combustible metals giving rise dust explosions also. Most Explosions caused by combustible metal dust, occurred in air cleaning device of local exhaust ventilation to capture and store the combustible dust. Therefore, this study was conducted to present and analyze technically that deformation and rupture shape of air cleaning device structure by Finite Element Analysis(FEA) rather than a simple prediction, in case of explosion occurs in an air cleaning device.

• Journal of Korean Society of Environmental Engineers
• /
• v.28 no.4
• /
• pp.384-388
• /
• 2006

The adsorption ability of polar and toxic substance was greatly enhanced by treating activated carbon with acid solution and impregnating iron, copper, or silver by using in 0.1 M $FeSO_4{\cdot}7H_2O,\;CuSO_4{\cdot}5H_2O,\;AgNO_3$ 300 mL per activated carbon 50 g. Physical and chemical properties of the metal impregnated activated carbons were measured using specific surface area, pore volume and size distribution, scanning eletron microscope(SEM), adsorption isotherm. When activated carbon was treated with acid, the quantity of impregnated metal increased about 1.3 times since the micropores were converted to mesopores or macropores. Both the physical absorption by micropores and chemical absorption by metal ions could be achieved simultaneously with the metal impregnated activated carbon because the capacity of micro pores did not change even after metal ions were impregnated.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.12B
• /
• pp.1468-1474
• /
• 2009

This paper shows an UHF RFID metallic tags using a Cavity structure for a long reading range. The reading range of a general passive tag is limited because the EIRP of a reader system is limited as 36㏈m by ISO 18000-6. To extend the reading range, the tag antenna should have a high gain antenna structure. The designed tag antenna is recognized over 10m range with a Cavity structure. The directivity pattern and the performance of the tag with the Cavity structure is stable when it is attached to a metallic object. The designed tag antenna has two kinds as cavity thickness. The sizes of designed tag antennas are $176\;{\times}\;52\;{\times}\;10\;mm$ and $176\;{\times}\;61\;{\times}\;30mm$ They can be attached to a large metallic materials and heavy equipments. The measured reading ranges of the tags are about 11m and 15m when they are attached to a metallic object.

• Proceedings of KOSOMES biannual meeting
• /
• 2007.11a
• /
• pp.43-49
• /
• 2007

The metals we are familiar with(Al, Ag, Au, Cu, Cd, Co, Fe, Ni, Pb, Zn, etc) are common elements and conservative pollutants. Although metals are often vital constituents of the metabolism of living organisms(trace elements}, a number of them are toxic if their concentration exceeds a certain threshold. It has long been recognized that measurements of trace metals in natural waters are often subject to large errors in terms of precision and accuracy. Since 1975 in US and European countries, seawater concentration of many trace metals have been shown to be factors of 10-1,000 lower than those previously accepted. Vertical profiles have been found to be consistent with known biological, physical and/or geochemical processes. These are resulted from major advances in analytical instrumentation and methodology for trace elements, and greater attention has been given to assuring the elimination of contamination during sampling, storage, and analysis.

• Clean Technology
• /
• v.20 no.2
• /
• pp.116-122
• /
• 2014

Various types of MOFs (metal-organic frameworks) were prepared via hydrothermal and post-grafting methods and applied as catalysts for the synthesis of jasminaldehyde, one of the representative perfume intermediates, by Aldol condensation of benzaldehyde with heptanal. Although both acid and base sites could catalyze the reaction, the catalytic performance was strongly dependent on the physical properties as well as the nature of functionalization on MOFs. While the use of sulfonated MOF catalysts led to decrease of jasminaldehyde selectivity regardless of MOFs used, the selectivity change was found to rely on the MOF types in the case of the amine-functionalization. Among the catalysts tested, MIL-101 shows the best catalytic performance, which may suggest that MIL-101 has suitable acid properties to promote the Aldol condensation and the large pore of MIL-101 is also advantageous to alleviate the diffusion problem of bulky products.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2007.06a
• /
• pp.191-191
• /
• 2007

유효 산화막 두께가 약 2.0nm 정도의 $ZrO_2$ 절연막 위에 Ta-Mo 금속 합금과 Ru-Zr 금속 합금을 Co-sputtering 방법을 이용하여 여러 가지 일함수를 갖는 MOS capacitor를 제작하여 전기적 재료적 특성에 관하여 연구를 하였다. 그 결과 각각의 금속 합금 게이트는 4.1eV 에서 5.1eV 사이의 다양한 일함수를 나타냈으며, $400^{\circ}C$, $500^{\circ}C$, $600^{\circ}C$, $700^{\circ}C$, $800^{\circ}C$ RTA 후의 C-V특성 곡선 및 I-V 측정을 통하여 누설전류를 확인하였다. 그 결과 Ta-Mo 금속 합금의 경우 스퍼터링 파워가 100W/70W에서 NMOS에 적합한 일함수를 가졌으며, Ru-Zr 금속 합금의 경우 스퍼터링 파워가 50W/100W에서 NMOS에 적합한 일함수를 가졌다. 열처리 후의 C-V특성 곡선에서도 정전용랑 값이 거의 변하지 않았으며 평탄 전압의 변화도 거의 없었다. 누설전류 특성에서는 물리적 두께가 비슷한 기존의 $SiO_2$ 절연막에서 실험결과와 비교하여 약 100배 정도 감소되었음을 알 수 있었다. 또한 기존의 실험들에서 나타난 열처리 후의 $ZrO_2$ 절연막과 Si 기판 사이의 Interfacial layer 의 동반 두께 증가로 인한 전기적 특성 저하가 나타나지 않는 줄은 특성을 보여준다.

• Journal of the Microelectronics and Packaging Society
• /
• v.23 no.4
• /
• pp.87-92
• /
• 2016

The importance of heat dissipation for the electric device modules along the thickness direction is increasing. Two types of two-layered materials, metal-metal bonding and dielectric-metal bonding, have been fabricated by roll bonding process and a thermal diffusivity of the specimens was measured along the thickness direction. The thermal diffusivity of specimens with metal-metal bonding measured by light flash analysis (LFA) showed a same value independent on the direction of heat flow. However, the thermal diffusivity of specimens with dielectric-metal bonding showed a big difference of 17.5% when the direction of heat flow changed oppositely in the LFA process. The measured thermal diffusivity of specimens when the heat flows from metal to dielectric direction showed smaller value of 17.5% compared to the value when the heat flow from dielectric to metal direction. The difference in thermal diffusivity of specimens with dielectric-metal bonding dependence on direction of heat flow is due to the electron-phonon resistance that occurred transfer process of electron energy to phonon energy near the interface.

• Journal of the Korean Society for Precision Engineering
• /
• v.5 no.3
• /
• pp.9-15
• /
• 1988

필자가 금속절삭연구에 종사하여 오면서 때로 느낀 것 중에 이것만이라도 지켜 주었으면 하는 소망에서 본 제목을 택하여 보았다. 절삭 기구에 영향을 주는 인자는 수 없이 많으나 본 강좌에서는 free cutting에 의한 2차원 절삭과 3차원 절삭을 정의 하여 구별하고 공구각 중에서 가장 중요시 되는 유효졍사각에 대하여만 언급하고 절삭 실험에서 지켜야 할 기타 사항 순으로 피력코저 한다.

• Proceedings of the Korean Radioactive Waste Society Conference
• /
• 2010.05a
• /
• pp.33-34
• /
• 2010

• Proceedings of the Korean Powder Metallurgy Institute Conference
• /
• 1995.04a
• /
• pp.15-16
• /
• 1995