• Korean Chemical Engineering Research
• /
• v.50 no.5
• /
• pp.802-807
• /
• 2012

The autothermal reforming of methane to syngas has been carried out in a reactor charged with both a Ni (15 wt%)-Ru (1 wt%)/$Al_2O_3$-MgO metallic monolith catalyst and an electrically-heated convertor (EHC). The standalone type reactor has a start-up time of less than 2 min with the reactant gas of $700^{\circ}C$ fed to the autothermal reactor. The $O_2/CH_4$ and $H_2O/CH_4$ ratio governed the methane conversion and temperature profile of reactor. The reactor temperature increased as the reaction shifted from endothermic to exothermic reaction with decreasing $H_2O/CH_4$ ratio. Also the amount of $CO_2$ in the products increases with increasing $H_2O/CH_4$ ratio due to water gas shift reaction. The 97% of $CH_4$ conversion was obtained and the reactor temperature was maintained $600^{\circ}C$ at the condition of $GHSV=10,000\;h^{-1}$ and feed ratio ($H_2O/CH_4=0.6$ and $O_2/CH_4=0.5$). In this condition, the maximum flow rate of the syngas generated from the reactor charged with 170 cc of the metallic monolith catalyst is $0.94\;Nm^3/h$.

• Journal of the Korean Institute of Gas
• /
• v.26 no.2
• /
• pp.14-20
• /
• 2022

In this study, the catalytic reaction characteristics for producing hydrogen using methanol steam reforming were investigated. Nickel and copper are frequently used in steam reforming reaction and methanol synthesis, were used as main active metals. As a support, hydrotalcite has a high specific surface area, excellent porosity and thermal stability, and has weak Lewis acid sites and basic properties. Hydrotalcite was used to identify catalysts of methanol steam reforming with catalytic activity and their properties. In this research, high reactivity was shown in the catalyst of copper metal with high reducibility. And increasing of active metal loading showed the higher the methanol conversion and hydrogen selectivity.

• Proceedings of the Korean Radioactive Waste Society Conference
• /
• 2003.11a
• /
• pp.215-219
• /
• 2003

The technology to fix a molten LiCl waste, which would be generated from the process to convert spent fuel to metal, into zeolite and then make a final waste form is doing developed. The XRD results of salt-loaded zeolites with different mixing ratios showed that all zeolites transformed from zeolite A type into Li-A type, or also Sodalite type as a minor phase for some conditions. The optimum LiCl-to-zeolite ratio to bring a minimum free salt was 1.0 when the molten LiCl waste contained Cs and Sr.

• 한국신재생에너지학회:학술대회논문집
• /
• 2006.06a
• /
• pp.73-76
• /
• 2006

본 연구에서는 독일 율리히 연구소에서 도입된 면적 200mm*200mm의 연료극 지지체 평판형 SOFC 셀 및 금속 분리판 40장을 적층하여 5kW급 SOFC 스택을 제작하고 연속운전을 수행하여 운전특성을 분석했다. 본 연구를 통해 도입된 5kW급 SOFC 스택은 외국에서 시도된 적이 없는 평판형 SOFC스택의 가압운전을 시도해 보는 것으로서, 스택의 임계압력 특성을 확인하고, 이를 바탕으로 가스터빈-연료전지 하이브리드 시스템에서의 SOFC 스택 가압 운전기술을 확보하는 것이다 이러한 목적을 위해 본 연구에서는 상압형 5kW급 SOFC 스택 운전시스템에 대한 구성과 설계, 전반적인 운전 특성평가 (40셀 스택 운전 열 사이클 시험 연료 전환 $(H_2{\rightarrow}pre-reformed\;gas)$, 1200시간 연속운전 등)가 이뤄졌다.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.8 no.1
• /
• pp.19-32
• /
• 2010

Electrolytic reduction technology is essential for the purpose of adopting pyroprocessing into spent oxide fuel as an alternative option in a back-end fuel cycle. Spent fuel consists of various metal oxides, and each metal oxide releases an oxygen element depending on its chemical characteristic during the electrolytic reduction process. In the present work, an electrolytic reduction behavior was estimated for voloxidized spent fuel based on the assumption that each metal-oxygen system is independent and behaves as an ideal solid solution. The electrolytic reduction was considered as a combination of a Li recovery and chemical reactions between the metal oxides such as uranium oxide and the produced Li metal. The calculated result revealed that most of the metal oxides were reduced by the process. It was evaluated that a reduced fraction of lanthanide oxides increased with a decreasing $Li_2O$ concentration. However, most of the lanthanides were expected to be stable in their oxide forms. In addition, a semi-empirical model for describing $U_3O_8$ electrolytic reduction behavior was proposed by considering Li diffusion and a chemical reaction between $U_3O_8$ and Li. Experimental data was used to determine model parameters and, then, the model was applied to calculate the reduction yield with time and to estimate the required time for a 99.9% reduction.

• 한국신재생에너지학회:학술대회논문집
• /
• 2005.11a
• /
• pp.112-121
• /
• 2005

본 연구는 2003년부터 2005년까지 2년간 에너지관리공단의 선행연구과제로서 진행되었으며 20 Watt 급 소형 연료전지에 수소를 공급할 수 있는 소형의 마이크로 채널 메탄올 개질장치를 개발하는 것을 목적으로 하였다. 개질장치는 개질기 본체, 여기에 반응열을 공급 해주는 촉매 연소기 그리고 연료를 증발시켜 주는 연료증발기의 세부분으로 구성되며 각 반응기의 개발 및 통합을 수행하였다. 반응기는 반응면적을 증가시키기 위하여 폭 $200{\sim}5000{\mu}m$, 필이 $200{\sim}5000{\mu}m$ 규모의 마이크로 채널 유로를 금속 박판을 화학 에칭하여 구현하였으며 이를 수십장 적층하여 전체 반응기를 제작하였다. 마이크로 채널표면에 내부 촉매 지지체를 먼저 코팅한 후 촉매를 코팅하는 방법을 사용하여 담지체 코팅으로 기하학적 표면적 대비 표면적이 10 배 이상 향상되는 우수한 결과를 얻을 수 있었고 촉매의 내구성이 월등히 향상 되었다. 저온 활성 촉매를 사용하여 $350^{\circ}C$ 이하에서 메탄을 전환율 90% 이상을 구현하였다. 실제 운전 후 측정 결과 개질 반응기의 부분별 온도차가 $20^{\circ}C$ 이내로 설계의 우수성을 확인하였다. 촉매 연소기를 이용한 개질 반응열 공급장치를 개발하여 20Watt 급 수소 생산을 위한 개질 반응기에 반응열을 공급하도록 하였다. 이와 함께 촉매 연소기를 이용한 연료 증발열 공급 장치 개발하여 개질기 공급 연료의 90% 이상이 기화되도록 하였다.

• Applied Chemistry for Engineering
• /
• v.35 no.2
• /
• pp.134-139
• /
• 2024

In the steam reforming of methane reactions, the effect of adding noble metals Ru and Pd to a Ni-based catalyst as promoters was analyzed in terms of catalytic activity and hydrogen production. The synthesized catalysts were coated on the surface of a honeycomb-structured metal monolith to perform steam methane reforming reactions. The catalysts were characterized by XRD, TPR, and SEM, and after the reforming reaction, the gas composition was analyzed by GC to measure methane conversion, hydrogen yield, and CO selectivity. The addition of 0.5 wt% Ru improved the reduction properties of the Ni catalyst and exhibited enhanced catalytic activity with a methane conversion of 99.91%. In addition, reaction characteristics were analyzed according to various process conditions. Methane conversion of over 90% and hydrogen yield of more than 3.3 were achieved at a reaction temperature of 800 ℃, a gas hourly space velocity (GHSV) of less than 10000 h^-1, and a ratio of H₂O to CH₄ (S/C) higher than 3.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.8 no.1
• /
• pp.71-76
• /
• 2010

The electrorefining process, one of main processes which are composed of pyroprocess to recover the useful elements from spent fuel, and the domestic development of electrorefiner have been reviewed. The electrorefiner is composed of an anode basket containing reduced spent fuel such as uranium, transuranic and rare earth elements, and a solid cathode, which are in LiCl-KCl eutectic electrolyte. Oxidation (dissolution) reaction occurs on the anode and a pure uranium is electrochemically reduced (deposited) on the solid cathode. By application of graphite cathode, which has a self-scrapping characteristics for the uranium deposits, and a recovery of the fallen deposits by a screw conveyer, a high-throughput continuous electrorefiner with a capacity of 20 kgU/day has been developed.

• Clean Technology
• /
• v.30 no.2
• /
• pp.145-156
• /
• 2024

Carbon has a large specific area and excellent chemical stability, so research on its use as a catalyst support is actively conducted. When using carbon as a support, the pretreatment process is essential. Through pretreatment of carbon, the growth of metal nanoparticles can be controlled and the bonding strength between the support and metal particles can be improved. In this study, carbon was pretreated for surface modification and 5 wt% Pd/C catalysts were synthesized using it as a support. Catalytic activity was evaluated through phenol hydrogenation. To compare with nitric acid, which is commonly used in carbon pretreatment, carbon pretreatment was performed using organic acid. Pd/C treated with gluconic acid showed the highest activity, with 94.93% phenol conversion and 92.76% cyclohexanone selectivity. Therefore, it is expected that pretreatment of the carbon support using organic acid will not only overcome the disadvantages of inorganic acid treatment but also improve catalyst performance.

• Journal of the Korean Electrochemical Society
• /
• v.18 no.3
• /
• pp.121-129
• /
• 2015

The platinum anode for the electrolytic reduction process is generally surrounded by a nonporous ceramic shroud with an open bottom to offer a path for $O_2$ gas produced on the anode surface and prevent the corrosion of the electrolytic reducer. However, the $O^{2-}$ ions generated from the cathode are transported only in a limited fashion through the open bottom of the anode shroud because the nonporous shroud hinders the transport of the $O^{2-}$ ions to the anode surface, which leads to a decrease in the current density and an increase in the operation time of the process. In the present study, we demonstrate the electrolytic reduction of 1 kg-uranium oxide ($UO_2$) using the porous shroud to investigate its long-term stability. The $UO_2$ with the size of 1~4mm and the density of $10.30{\sim}10.41g/cm^3$ was used for the cathode. The platinum and 5-layer STS mesh were used for the anode and its shroud, respectively. After the termination of the electrolytic reduction run in 1.5 wt.% $Li_2O-LiCl$ molten salt, it was revealed that the U metal was successfully converted from the $UO_2$ and the anode and its shroud were used without any significant damage.