• Resources Recycling
• /
• v.30 no.4
• /
• pp.20-26
• /
• 2021

Solar grade silicon (SoG-Si) has been commercially supplied mainly from off-grade high-purity silicon manufactured for electronic-grade Si (EG-Si). Therefore, for wider application of solar cells, the development of a refining process at a considerably lower cost is required. The most cost-effective and direct approach for producing SoG-Si is to purify and upgrade metallurgical-grade Si (MG-Si). In this study, directional solidification of molten MG-Si was conducted in a high-frequency induction furnace to remove iron from molten Si. The experimental conditions and results were also discussed with respect to the effective segregation coefficient, Scheil equation, and Peclet number. The study showed that when the descent velocity of the specimen decreased, the macro segregations of impurities and ingot purities increased. These results were derived from the decrease in the effective segregation coefficient with the decrease in the rate of descent of the specimen.

• Resources Recycling
• /
• v.20 no.5
• /
• pp.3-15
• /
• 2011

This study describes the national municipal solid waste stream of the United States based on data collected and published by EPA for 1960 through 2009. This paper characterizes the municipal solid waste stream of the nation as a whole, and can be useful for understanding the nationwide stream of America. Among the various materials contained in MSW, recycling status of the major materials of paper and paperboard, glass, metals, plastics, food scraps and yard trimmings are discussed somewhat more minutely.

• Resources Recycling
• /
• v.21 no.4
• /
• pp.53-59
• /
• 2012

In this study, behaviors of removing Sb and Pb by oxidation of molten Bi-Pb-Sb alloy which is a by-product of non-ferrous smelting process was investigated. The molten alloy was oxidized at 1173 K by bubbling $N_2+O_2$ gas through a submerged nozzle. The Sb was removed and recovered as mixed phase of $Sb_2O_3$ and metal Sb. In the case of bubbling $N_2+O_2$ gas into molten Bi-Pb alloy at 923 K, Pb was oxidized and removed to slag. But Bi could not be refined due to simultaneous oxidization of Bi with Pb.

• Resources Recycling
• /
• v.22 no.2
• /
• pp.3-10
• /
• 2013

Indium is one of the rare metals, and it has been used mainly for preparation of indium tin oxide (ITO). This review investigated the process parameters and the merits and demerits of several methods to recover indium from the leaching solution of secondary resources, such as solvent extraction, ion exchange, and precipitation. D2EHPA has been used mostly as a cationic extractant for indium extraction in moderate acid solutions, while amine extractants are used in strong hydrochloric acid solution. Since the loading capacity of resins for indium is generally small, ion exchange has some advantage over solvent extraction only when the concentration of indium is low.

• Resources Recycling
• /
• v.11 no.4
• /
• pp.37-43
• /
• 2002

As the consumption of galvanized steels in cans and automobiles and the quantity of scraps increase, the recycling problems of EAF dust become a important problem. Valuable metals such as Fe, Zn, Pb are of continued interest to metallurgists. To recover the valuable metal and to remove the toxicity of EAF dust, high temperature smelting process is or researching as a pilot scale. The Reduction kinetics of Zn in EAF dust is so important in a view of the economic consideration of the process. In this study, the kinetics behavior of Zn in EAF dust were measured as a point of application in high temperature smelting process. The rate control step in ZnO and franklinite is revealed to be chemical reaction on the reaction surface.

• Resources Recycling
• /
• v.15 no.5 s.73
• /
• pp.52-56
• /
• 2006

Waste aluminum dross was leached with hydrochloric acid to prepare PAC, poly aluminium chloride, used as water treatment chemicals. Metallic aluminum remained in the waste aluminum dross was dissolved into the hydrochloric acid solution. The solution could be used as PAC after adjusting the required alumina concentration and the basicity. Comparing to the conventional method far preparation of PAC using aluminum hydroxide, material cost could be saved in this method. Also, there is an additional merit in view of recycling of the waste aluminum dross by reducing the amount of waste dross to be landfilled.

• Resources Recycling
• /
• v.6 no.4
• /
• pp.24-30
• /
• 1997

The recent trend of recycle of mold scrap is to make high quality secondary ingot which can be used as raw malerial undcr intensive control of scrap. In this study, recycle of aluminum chlp generated atter machinmg process of castings was performed by vortex melting melhod Vortex melting technique was adopted for chip mclting process. The condition far optimal vortcx depth was decided using water mndellng experiment varying the shape, location, rotating speed of stlircr and watcr levcl. Before melting, chips were preheated at room temperame, 200, 300, $ 400^{\circ}C$and then submerged in the mirldle of vortex. The lecovery rale depending on the temperature was examined. As a result vortex depth was influenccd only by shape and rotating speed of stirrer, and the hlghest recovery rate oI 97% was obta~nedw hcn the submerged chip was preheated at $300^{\circ}C.$

• Resources Recycling
• /
• v.12 no.2
• /
• pp.36-44
• /
• 2003

The present work relates to the recovery of dissolved Mo from spent mandrel dissolving acid solution by injecting ammonia gas. In order to optimize the process parameters for high yield and high purity of recovered Mo products, a bench scale and a pilot scale experiments were carried out. As a result, more than 99.5% of Mo in spent acid was recovered in the form of ammonium molybdate(4MoO$_3$.$2NH_3$.$H_2$O). The purity of Mo products recovered was higher than 99.5%. In addition, the mother liquor, residual solution after precipitation and filtration of ammonium molybdate solid particles, could be utilized as fertilizers.

• Resources Recycling
• /
• v.24 no.2
• /
• pp.23-28
• /
• 2015

Most of the domestic need for tin rely on imports. In this work, a pyrometallurgical process was investigated to recover pure tin from the tin oxides in tin bath which results from the production of flat glass and LCD panel. From the results on the effect of reaction temperature, the highest recovery percentage of tin was obtained at $1350^{\circ}C$. The recovery percentage of tin was improved to 88% by employing the first and second smelting step. Electrorefining of the crude tin thus obtained led to pure tin with purity higher than 99.9%.

• Resources Recycling
• /
• v.16 no.5
• /
• pp.3-7
• /
• 2007

Waste aluminum dross was processed to prepare alum with sulfuric acid, and poly aluminum chloride(PAC) with hydrochloric acid. Metallic aluminum remained in the waste dross was dissolved into the sulfuric acid solution, and the solution could be used as alum for water treatment chemicals after adjusting the required alumina concentration and pH of the solution. Also, it was dissolved into the hydrochloric acid solution and processed to make PAC solution. Compared with the conventional method for preparation of alum and PAC using aluminum hydroxide, material cost could be saved in this method. Also, there is an additional merit in view of recycling of the waste aluminum dross by reducing the amount of waste disposed to landfill.