• Proceedings of the Materials Research Society of Korea Conference
• /
• 2011.05a
• /
• pp.22.1-22.1
• /
• 2011

산업의 발달과 더불어 수송기기를 포함한 각종 구조물의 경량화에 따라 피로파괴에 대한 관심이 높아지고 있다. 과거에는 피로균열생성과 피로균열전파를 구분하지 않는 S-N (stress-cycles to failure) 피로 개념을 이용하여 구조재의 피로 거동을 이해하고자 하였다. 그러나 최근에는 모든 구조물에는 균열이 존재한다는 가정에서 시작된 파괴역학(fracture mechanics)에 기초한 피로균열성장 개념을 이용하여 피로에 대한 저항성이 큰 구조재를 개발하고 있으며, 구조물의 피로수명을 예측하고 있다. 본 발표에서는 미세조직, 인장특성, 용접이나 부식 환경 등이 금속의 피로 및 피로균열성장(fatigue crack propagation)에 미치는 영향에 대한 논하고자 한다.

• Journal of the Korea Institute of Building Construction
• /
• v.10 no.5
• /
• pp.21-29
• /
• 2010

Cathodic Protection has been introduced as a method of protecting metals under the ground or sea from corrosion. Since 1970, it has been applied to reinforced concrete structures as a corrosion protection method. After 1990, it became used around the world, and its usability has been well confirmed. But this method has some problems in terms of construction and economy. To solve these problems, a Cathodic Protection Method using a highly-durable metal spray was developed. First, the specimen was covered with anodic materials (Zn, Al) by using metal spray. The corrosion protection performance was confirmed by measuring the corrosion current of the specimen. Through the experiment, it is possible to confirm that the Cathodic Protection Method using a high metal spray provides effective protection against corrosion to reinforced concrete structures.

• Proceedings of the KIEE Conference
• /
• 2011.07a
• /
• pp.1816-1817
• /
• 2011

원자력발전소의 금속파편감시계통(LPMS : Loose Parts Monitoring System)은 원자로냉각재계통 내부에 존재할 수 있는 금속 이물질과 구조물 이완부에 의한 충격신호를 조기에 검출하여 원자로 구조물 및 핵연료 손상, 제어봉 구동장애 등을 미연에 방지하여 발전소 안전운전을 담당하는 중요 감시설비이다. LPMS는 금속 이물질이나 구조물 이완부에 의한 충격신호를 검출하기 위해 충격파에 민감한 가속도계를 원자로냉각재계통 중 금속파편이 자연적으로 모일 수 있는 각 구역의 표면에 최소 2개 이상 설치되어 있다. 원전은 규제요건에 따라 설비의 건전성 확인을 위해 24시간, 7일, 31일, 91일 마다 각 1회의 설비 건전성 시험을 수행하며, 계획예방정비기간 중에는 가속도계 주변에서 강구나 스프링 타격기를 이용한 충격시험을 통해 설비 전체의 건전성을 확인하고 있다. 설비 건전성 확인을 위해 경상운전 중에 수행하는 설비 건전성 시험에는 설비 특성상 가속도계 및 전치증폭기의 건전성을 확인할 수 없다. 따라서 본 논문에서는 경상운전 중 가속도계와 전치증폭기의 건전성을 확인할 수 있는 기법을 제시하고자 한다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.7
• /
• pp.4329-4335
• /
• 2014

This study examined the effects of the shear bond strength when the surface condition of the metal and zirconia, each being the lower structures, was different when determining the bond strength (metal group) of the metal lower structure with upper ceramics, and the shear bond strength (zirconia group) of zirconia lower structure with the upper ceramics in prosthetic appliances of metal-ceramic crown and zirconia-ceramic crowns. The metal groups were divided into a total of four groups: the group with no condition on the metal surface(NM), the group with sand-blasting(SM), the group with applied opaque ceramics(OM), and the group with applied opaque ceramics and sand-blasting(SOM). The zirconia groups were also separated into four groups: the group with no condition(NZ), the group with sand-blasting(SZ), the group treated with ZirLiner on the zirconia surface(LZ), and the group applied with ZirLiner along and sand-blasting(SLZ). To examine the effects on the shear bond strength according to the surface condition of each of the four metal and zirconia groups, SPSS was used to conduct one-way ANOVA. For metal-ceramic crowns, it would be best to apply opaque ceramics after sand-blasting on the surface of the metal, the lower structure. For zirconia-ceramic crowns, it is recommended to apply the ZirLiner after sand-blasting on the surface of zirconia, the lower structure.

• Journal of Soil and Groundwater Environment
• /
• v.13 no.2
• /
• pp.12-20
• /
• 2008

This study was conducted to investigate the spatial distributions of chromated copper arsenate (CCA) metals in soils around three log structures and a sound barrier, all built with CCA-treated wood. Sixty-six surface and 35 profile soil samples were collected around the wood structures in addition to 13 background soil samples. The concentrations of chromium, copper, and arsenic in the soil samples collected in the vicinity of the structures were higher than those in the background samples, except in the case of one structure. The concentrations in the surface soils adjacent to the 3-year-old structures seemed to be higher than those in the soils adjacent to the 8-year-old ones. Although the lateral distributions of the metals varied with the structures, chromium and arsenic appeared to show concentration gradients within 20-60 cm and 40-100 cm, respectively. Copper seemed to be the least mobile, displaying concentration gradients only within 20 cm. Even though there were no explicit vertical concentration gradients for any of the metals according to the profile soil sample analysis, chromium and copper seemed to show concentration gradients only up to 5 and 10 cm, respectively, whereas arsenic showed gradients up to 35 cm. At study sites, it was evident that heavy metals leached into soil from CCA-treated wood were confined to neighboring areas both laterally and vertically, and that any plausible ecological impact may occur only within a small range.

• Journal of Welding and Joining
• /
• v.6 no.3
• /
• pp.1-7
• /
• 1988

본 고에서는 세라믹과 금속과의 접합시 발생하는 문제점을 살펴보고 현재 연구되고 있는 접합방법 및 금후의 전망 등에 대해 해설하고자 한다.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2009.05a
• /
• pp.235-236
• /
• 2009

금속 아세테이프가 금속으로 열분해하는 반응을 이용하여 템플레이트 안에 잘 정렬된 금속 나노 구조물을 얻는 것은 센서 (sensor), 분리 막(separation), 저장 장치(storage), 에너지 전환 장치 (energy conversion)에 응용이 가능하다. 실버 아세테이트와 팔라듐 아세테이트에서 순수 실버와 팔라듐 나노 구조의 제조 및 형태의 차이를 밝히는 것을 목적으로 나노 입자의 크기와 활성화 에너지가 이에 영향을 주는 것으로 확인할 수 있었다. 금속 나노 구조의 확인 및 나노입자의 크기와 활성화 에너지를 분석 관찰하기 위해 DSC, TG, XRD, FE-SEM 등을 이용하였다.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.39 no.11
• /
• pp.1099-1103
• /
• 2015

Recently, there have been several studies on the inspiration and application of optimized natural structures. One study introduced a new adhesion method that was inspired by the feet of geckos because of their superior features such as high adhesion strength, ease-of-removal, and they are environmentally friendly. Various micro- or nano-structures were fabricated and tested for gecko-like dry adhesives, but gecko-like dry adhesives that were developed became easily worn from frequent use. In this study, we propose a metal-coating method to improve the durability of gecko-like dry adhesives. We evaluate the initial adhesion strength and durability by performing repeated adhesion tests on a glass plate. The initial adhesive strength of gold-coated micro-structures was 60% of that for non-coated ones. However, the adhesive strength of gold-coated micro-structures was kept as 58% of their initial adhesion strength, while that of non-coated ones was only 40%.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2008.11a
• /
• pp.429-432
• /
• 2008

Cathodic Protection Method was introduced as a corrosion protection method of metals under the ground or sea. Since 1970, it was applied to corrosion protection method of reinforced concrete structures. After 1990, this method has been used around the world, and its usability was proved. But this method has some problems on the aspect of construction and economy. In order to solve these problems, Cathodic Protection Method by using high durable metal spray was developed. First, the specimen was covered with anodic materials (Zn, Al) by using metal spray. And a performance of corrosion protection was confirmed by measuring corrosion current of specimen. Through the result of experiment, it is possible to know that Cathodic Protection Method by using high metal spray is good to protect to corrosion on reinforced concrete structures.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.34 no.4
• /
• pp.391-398
• /
• 2010

In this paper, we propose a sensor design by using a polysilicon strain gauge bonded to a metal diaphragm. The fabrication process of the thin polysilicon strain gauges having thicknesses of $50\;{\mu}m$ was established using conventional MEMS technologies; further, the technique of glass frit bonding of the polysilicon strain gauge to the stainless steel diaphragm was established. Performance of the polysilicon strain gauge bonded to the metal cantilever beam was evaluated. The gauge factor, temperature coefficient of resistance (TCR), nonlinearity, and hysteresis of the polysilicon strain gauge were measured. The results demonstrate that the resistance increases linearly with tensile stress, while it decreases with compressive stress. The value of the gauge factor, which represents the sensitivity of strain gauges, is 34.0; this value is about 7.15 times higher than the gauge factor of a metal-foil strain gauge. The resistance of the polysilicon strain gauge decreases linearly with an increase in the temperature, and TCR is $-328\;ppm/^{\circ}C$. Further, nonlinearity and hysteresis are 0.21 % FS and 0.17 % FS, respectively.