• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.45 no.2
• /
• pp.37-43
• /
• 2008

The performance and hardware complexity of LDPC decoders depend on the design parameters of quantization, the clipping threshold $c_{th}$ and the number of quantization bits q, and also on the maximum number of decoding iterations. In this paper, the BER performances of LDPC codes are evaluated according to the clipping threshold $c_{th}$ and the number of quantization bits q through the simulation studies. By comparing the quantized Min-Sum algorithm with the ideal Min-Sum algorithm, it is shown that the quantized case with $c_{th}=2.5$ and q=6 has the best performance, which approaches the idea case. The decoding complexities are calculated and the word error rates(WER) are estimated by using the pdf which is obtained through the statistical analyses on the iteration numbers. These results can be utilized to tradeoff between the decoding performance and the complexity in LDPC decoder design.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2006.06a
• /
• pp.105-105
• /
• 2006

IT 산업 및 반도체 산업이 발전함에 따라 초소형, 고집적화 시스템의 요구에 대응하기 위해서 고해상도 및 고정밀의 패턴 구현에 관한 많은 연구가 진행되고 있다. 이러한 연구는 각종 산업제품의 PCB(Printed Circuit Board) 및 디스플레이 장치인 PDP(Plasma Display Panel), LCD(Liquid Crystal Display) 등에 적용되어 널리 응용되고 있다. 현재 널리 사용되는 인쇄 회로 기판은 마스킹 후 선택적 에칭 방식을 적용하여 금속 배선을 형성하는 방식을 적용하고 있다. 이러한 방식은 설계가 변경될 경우 마스크를 다시 제작해야 하는 번거로움이 있어 설계 변경이 용이하지 않고 더욱 길어진 생산시간의 증가로 인하여 생산성 및 집적도가 떨어지게 된다. 따라서 최근에는 이러한 한계를 극복하기 위한 방안이 여러 가지 측면에서 시도되고 있으며, 그 중에서도 Inkjet Printing 기술에 대한 관심이 증가하고 있다. 본 연구에서는 Inkjet Printing 방식을 적용하여 금속 배선을 형성하고 선폭과 두께의 오차를 줄여 배선의 Tolerance 를 개선할 수 있는 방안을 제안하였다. Inkjet Printing 방식을 이용한 기존의 금속 배선 형성은 고해상도의 DPI(Dot Per Inch)에서 잉크 액적이 뭉치는 Bulge 현상이 발생되어 원하는 형상 및 배선의 폭을 구현하는데 어려움이 있었다. Bulge 현상은 배선의 불균일성을 야기할 뿐만 아니라 근접한 배선의 간섭에도 영향을 미처 금속 배선의 기능을 할 수 없는 단점을 발생시킨다. 따라서 본 연구에서는 이러한 Bulge 현상을 줄이고 배선간의 간섭을 방지하여 원하는 배선을 용이하게 형성할 수 있는 순차적 인쇄 방식을 적용하였다. 본 연구에서는 노즐직경 35um 의 Inkjet Head 와 나노 Ag 입자 잉크를 사용하여 Glass 표면 위에 배선을 형성하고 배선의 폭과 두께를 측정하였다. 또한 순차적 인쇄 방식을 적용하여 700DPI 이상의 고해상도에서 나타날 수 있는 Bulge 현상이 감소하였음을 관찰하였으며 금속 배선의 Tolerance를 10%내외로 유지할 수 있음을 확인하였다.

• Asia-pacific Journal of Multimedia Services Convergent with Art, Humanities, and Sociology
• /
• v.6 no.1
• /
• pp.39-48
• /
• 2016

The tacit knowledge transfer cultivate the value and mount of tacit knowledge. The tacit knowledge transfer plays the most important role for improving the competitiveness of the organization. Despite the tacit knowledge transfer is very important, the research related with tacit knowledge transfer has not been actively carried out. The barriers to tacit knowledge transfer interfere with the tacit knowledge transfer. The barriers to tacit knowledge transfer are lack of understanding knowledge experts, heavy over-work, insufficient compensation, trust shortage and knowledge stickiness. In order to overcome the barrier of the tacit knowledge transfer, it is necessary to promote knowledge broker. The knowledge broker is the foundation for the tacit knowledge transfer and the critical success factor for efficient tacit knowledge transfer. However, most research related on the knowledge broker had focused on the degree, centrality and density of the knowledge network. The framework is needed to performance indicator for diagnosing the tacit knowledge transfer. Therefore, we suggest the knowledge broker framework based on the social network analysis.

• Journal of Radiation Protection and Research
• /
• v.23 no.4
• /
• pp.259-266
• /
• 1998

There are three different types of gynecological applicator sets available in microSelectron-high dose-rate(HDR) System by Nucletron; standard applicator set(SAS), standard shielded applicator set(SSAS), and Fletcher-Williamson applicator set(FWAS). Shielding effect of a SAS without shielding material was compared with that of a SSAS with shielding material made of stainless steel(density ${\varrho}=8,000kg/m^3$) at the top and bottom of each ovoid, and of a FWAS with shielding material made of tungsten alloy(density ${\varrho}=14,000kg/m^3$ at the top and bottom of each ovoid. The shielding effects to the rectum and bladder of these two shielded applicator sets were to be measured at reference points with an ion chamber and specially designed supporting system for applicator ovoids inside of the computerized 3-dimensional water phantom. To determine the middle point of two ovoids the measurement was performed with the reference tip of ion chamber placed at the same level and at the middle point from the two ovoids, while scanning the dose with the ion chamber on each side of ovoids. The doses to the reference points of rectum were measured at 20(Rl), 25(R2), 30(R3), 40(R4), 50(R5), and 60(R6) mm located posteriorly on the vertical line drawn from M5(the middle dwell position of ovoid), and the doses to the bladder were measured at 20(Bl), 30(B2), 40(B3), 50(B4), and 60(B5) mm located anteriorly on the vertical line drawn from M5. The same technique was employed to measure the doses on each reference point of both SSAS and FWAS. The differences of measured rectal doses at 25 mm(R2) and 30 mm(R3) between SAS and SSAS were 8.0 % and 6.0 %: 25.0% and 23.0 % between SAS and FWAS. The differences of measured bladder doses at 20 mm(Bl) and 30 mm(B2) between SAS and SSAS were 8.0 % and 3.0 %: 23.0 % and 17.0 % between SAS and FWAS. The maximum shielding effects to the rectum and bladder of SSAS were 8.0 % and 8.0 %, whereas those of FWAS were 26.0 % and 23.0 %, respectively. These results led to the conclusion that FWAS has much better shielding effect than SSAS does, and when SSAS and FWAS were used for gynecological intracavitary brachytherapy in microSelectron-HDR system, the dose to the rectum and bladder was significantly reduced to optimize the treatment outcome and to lower the complication rates in the rectum and bladder.

• Journal of the Mineralogical Society of Korea
• /
• v.20 no.4
• /
• pp.313-325
• /
• 2007

In order to have better insights into adsorption of organic molecules on kaolinite surfaces, we performed quantum chemical calculations of interaction between three different model clusters of kaolinite siloxane surfaces and benzyl alcohol, with emphasis on the effect of size and lattice topology of the cluster on the variation of electron density and magnetic shielding tensor. Model cluster 1 is an ideal silicate tetrahedral surface that consists of 7 hexagonal rings, and model cluster 2 is composed of 7 ditrigonal siloxane rings with crystallographically distinct basal oxygen atoms in the cluster, and finally model cluster 3 has both tetrahedral and octahedral layers. The Mulliken charge analysis shows that siloxane surface of model cluster 3 undergoes the largest electron density transfer after the benzyl alcohol adsorption and that of model cluster 1 is apparently larger than that of model cluster 2. The difference of Mulliken charges of basal oxygen atoms before and after the adsorption is positively correlated with hydrogen bond strength. NMR chemical shielding tensor calculation of clusters without benryl alcohol shows that three different basal oxygen atoms (O3, O4, and O5) in model cluster 2 have the isotropic magnetic shielding tensor as $228.2{\pm}3.9,\;228.9{\pm}3.4,\;and\;222.3{\pm}3.0ppm$, respectively. After the adsorption, the difference of isotropic chemical shift varies from 1 to 5.5 ppm fer model cluster 1 and 2 while model cluster 2 apparently shows larger changes in isotropic chemical shift. The chemical shift of oxygen atoms is also positively correlated with electron density transfer. The current results show that the adsorption of benzyl alcohol on the kaolinite siloxane surfaces can largely be dominated by a weak hydrogen bonding and electrostatic force (charge-charge interaction) and demonstrate the importance of the cluster site and the lattice topology of surfaces on the adsorption behavior of the organic molecules on clay surfaces.

• Journal of the Korean Electrochemical Society
• /
• v.16 no.1
• /
• pp.19-29
• /
• 2013

Effects of current density, electrodeposition temperature and solution pH on properties of Cu thin films electrodeposited from pyrophosphate bath were investigated. Current efficiency was decreased with increasing current density and increased with increasing temperature. But solution pH slightly influenced on current efficiency and current efficiency was measured to be above 90% at both room temperature and $55^{\circ}C$. Residual stress of Cu thin film electrodeposited at room temperature was decreased with increasing current density, while current density reaches to 60 $mA/cm^2$ or more, stress became close to zero. Cu thin films electrodeposited at $55^{\circ}C$ exhibited the residual stress range of 0~40 MPa. At room temperature, dendritic surface morphology was observed above the current density of 30 $mA/cm^2$ and at $55^{\circ}C$, above the current density of 100 $mA/cm^2$. Cu thin films electrodeposited from bath solution with room temperature and $55^{\circ}C$ mainly consisted of (111) peaks. Specially, Cu thin film electrodeposited at 30 $mA/cm^2$ and $55^{\circ}C$ exhibited strong preferred orientation of (111) peaks.

• Journal of Korean Society of Transportation
• /
• v.28 no.3
• /
• pp.131-143
• /
• 2010

This study has aimed to develop accident modification factor(AMF) for rural two-lane roadway segments. Accident Modification Factor is a coefficient to assess roadway safety as reflecting characteristics of homogeneous roadway. It estimates accident frequency of roadway segments with developed base model and exposure. We found on items of such factors as crosswalk, driveway density, topography characteristic, land use and median through statistical models and literature review. To develop accident modification factors, we used statistical model methods and analyses of applicability and expert judgement method were practiced to validate it. Although expert judgement for land use item was questionable, most items were rated acceptable. Result of comparative analysis revealed crash frequencies of IHSDM and KHSEM were most similar with actual. However, accident distribution of KHSEM was more proper than IHSDM. Also overall estimated values of RSDS were found to be overestimated.

• Journal of Advanced Navigation Technology
• /
• v.20 no.4
• /
• pp.367-373
• /
• 2016

We propose an improved direction of arrival (DoA) estimation algorithm based on co-prime array and propagator method. The propagator method with co-prime array does not require singular value decomposition (SVD) requiring much less computational complexity but exhibiting somewhat worse performance in comparison with MUSIC based on co-prime array. We notice that one cause of the performance degradation was in the avoidance of the usage of the diagonal elements of the signal autocorrelation matrix that contains the noise power spectral density. So we propose an algorithm with the diagonal elements of the signal autocorrelation matrix based on the fact that the noise power spectral density can be estimated using noise observation over a long period of time. We observe, through simulations, that the proposed scheme in this paper improves the performance, with 4 times more computational requirement, by signal-to-noise ratio of 1.5dB and by DoA resolution of $0.7^{\circ}$ at the detection probability of 95% compared with the previously introduced co-prime array propagator scheme, resulting in performance much closer to that of co-prime array-based MUSIC scheme.

• Journal of Digital Convergence
• /
• v.18 no.5
• /
• pp.179-186
• /
• 2020

The purposes of this paper were: 1) to identify the structural changes of the northeast Asia airport network caused by the pandemic of COVID-19 using social network analysis (SNA) and 2) to suggest proposals for improving airport competitiveness. In this respect, the entire international air routes in northeast Asia airport collected data of 4-10 March 2019 and 9-15 March 2020 through schedules analyzer database of OAG. We found that both the density and centrality have decreased since the spread of COVID-19. The government and airport authorities need active support such as a reduction of various fees and a moratorium on transportation rights to overcome the crisis in the air transport industry. When the COVID-19 situation calms down in the future, we hope that further research will be conducted to identify the structural changes in the SNA aspects through the vast data establishment in countries such as the EU and America.

• Korean Journal of Organic Agriculture
• /
• v.23 no.4
• /
• pp.813-827
• /
• 2015

This study was conducted to evaluate the effect of organic inputs on soil properties in a newly reclaimed organic soils. The soil of the experiment site was very low in soil fertility and the physico-chemical properties were poor. Several organic input treatments with different source of nutrient were placed, including compost in combination with green manures for organic agricultural practices, chemical fertilizers for conventional agricultural practices, and control without fertilizer. The experiment was conducted with continuous cropping system during 3 years. The chemical properties concentration in compost+green manure treatment was increased continually compare to control and chemical fertilizer treatment, and closed to the recommended rate of fertilizer. The organic matter value for compost+green manure treatment was increased from 0.86~0.96% to 2.00~2.29% by continuous nutrient supply of compost and green manure. However, further investigation on increasing of organic matter value for 3 years is necessary to monitor carefully during the long-term because it will help to clarify the all mechanisms of organic matter on organic input application way. The available phosphate value for compost+green manure treatment was generally increased from 21.9~27.1 mg/kg to 182.0~394.1 mg/kg. In case of exchange cation, the concentration for compost+green manure treatment was increased during 2 years within the range to the recommended rate of fertilizer, however, it is expected to cause a rather over supply for 3 years.