• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.25 no.12B
• /
• pp.2060-2068
• /
• 2000

이 논문은 선형 송·수신 필터의 메모리와 증폭기의 비선형성에 기인하는, 메모리 있는 비선형 시스템의 인식(identification)과 보상에 대해 다룬다. 이와 같은 비선형 시스템은 메모리가 있는 두 개의 선형 시스템 사이에 메모리 없는 비선형 시스템이 있는 것으로 모델링할 수 있으며, 통계적 경사 근사법(stochastic gradient method)으로 선형 시스템의 필터 계수와, 다항식으로 표현되는 비선형 시스템의 계수를 구한다. 이렇게 모델링 되는 통신 채널은 통계적 경사 근사법과 간접 학습 구조를 사용하여 전치 보상기를 설계함으로써 보상한다. 여기서 제시한 비선형 보상 방법은 특정한 통신 채널 모델이 필요 없으며, 적응적으로도 적용이 가능하다.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.17 no.1
• /
• pp.173-180
• /
• 2022

Approximate Computing is a promising method for designing hardware-efficient computing systems. Approximate multiplication is one of key operations used in approximate computing methods for high performance and low power computing. An approximate 4-2 compressor can implement hardware-efficient circuits for approximate multiplication. In this paper, we propose an approximate multiplier with low area and low power characteristics. The proposed approximate multiplier architecture is segmented into three portions; an exact region, an approximate region, and a constant correction region. Partial product reduction in the approximation region are simplified using a new 4:2 approximate compressor, and the error due to approximation is compensated using a simple error correction scheme. Constant correction region uses a constant calculated with probabilistic analysis for reducing error. Experimental results of 8×8 multiplier show that the proposed design requires less area, and consumes less power than conventional 4-2 compressor-based approximate multiplier.

• Journal of Korean Society of Steel Construction
• /
• v.18 no.3
• /
• pp.373-383
• /
• 2006

In a steel structural system, noncomposite form deck one-way slab is the plate element supported by four-edged steel beams with unequaled stiffness. However, design criterion has analyzed the one-way slab as the continuous beam. Because the end beams that support the one-way slab have elastic supports t hat cause different deflections according to the support conditions and locations, the bending moments corresponding to the support ic support effect is not considered in the design criterion. Accordingly, to conduct a reasonable estimation of approximate moment coefficients considering the unequaled elastic support conditions, this study analyzes and estimates various models with varia bles for the ratios of live load to dead load and pattern arangements of live loads and span lengths. The analytical methods considering the finite three-dimensional plate element, the two-dimensional elastic support and the infinite stifnes suport are performed.

• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 1998.10a
• /
• pp.289-295
• /
• 1998

본 논문은 빠른 학습과 정확한 근사 능력을 갖는 새로운 CMAC 신경망 기반 퍼지 제어기르 제안한다. 제안한 CMAC 신경망 기반 퍼지 제어기(CBFLC)는 한 학습 주기 동안 전향 및 역전파 연산시 신경망내 유닛중 극히 일부분만이 활성화되어 학습에 참가하므로 학습 시간이 매우 빠르고, 비퍼지화 연산시 소속 함수의 중심값 뿐 아니라 폭을 동시에 고려하여 정확한 근사화를 얻는다. 제안한 퍼지 제어기내 입？출력 소속 함수의 중심값 및 폭 등의 구조적 파라메터들은 역전파 알고리즘에 의해 갱신된다. 제안한 CMAC 신경망 기반 퍼지 제어기를 트럭 후진 주차문제에 적용하여 근사화 능력 및 제어 성능면에서 여러 다른 퍼지 제어기들과 비교한다.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.10 no.3
• /
• pp.449-459
• /
• 1999

The scattering problems from electromagnetic absorbers can be greatly simplified using the transmission line approximations (TLA) and effective medium theory. This method has been widely used for the absorber design because of its very simple calculation and intuitional approach, while numerical analysis needs the tremendous computation requirements, This paper examined the accuracy and limitations originated by the intrinsic approximation limits of TLA by comparison with FEM results for various absorber design examples. It was found that the TLA result is valid when λ $\geq$ 2p, where λ is the wavelength of the interested upper frequency and p is the distance between two periodic cone arrays. Therefore, the electromagnetic absorbers having high material properties and big base-area commonly do not meet this condition, and the electromagnetic scattering from those absorbers must be evaluated by the numerical analysis in those cases.

• Journal of Navigation and Port Research
• /
• v.30 no.1 s.107
• /
• pp.105-111
• /
• 2006

A LMTT (Linear Motor-based Transfer Technology) is a horizontal transfer system for the yard automation This system is based on PMLSM (Permanent Magnetic Linear Synchronous Motor) that consists of stator modules on the rail and shuttle car. In this research, the kriging interpolation method using sequential sampling is utilized to find the optimum design of a mover in LMTT. The design variables are considered as the transverse, longitudinal and wheel beam's thicknesses. The objective function is set up as weight, while the constant functions are set up as the stresses generated by four loading conditions. The optimum results obtained by the suggested method are compared with those determined by the GENESIS.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.38 no.5
• /
• pp.1-6
• /
• 2001

In this paper, we propose the initial optimized structure of the Radial Basis Function Network(RBFN) which is more simple in the part of the structure and converges more faster than Neural Network. For this, we use the analysis method using time frequency localization and we can decide the initial structure of the RBFN suitable for the given problem. When we compose the hidden nodes with the radial basis functions whose localization are similar with the target function in the plane of the time and frequency, we can make a good decision of the initial structure having an ability of approximation.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.10 no.1
• /
• pp.13-22
• /
• 2000

본 논문에서는 Skipjack의 변환규칙 A와 같은 반복적인 구조에 대한 차분 특성 및 선형 근사식의 확률의 상한 값을 제시하고 이를 증명한다. 즉 라운드 함수에 대한 확률의 최대 값이 p이면 15라운드 후에 p4이 됨을 보인다. 따라서 본 논문에서 고려한 구조는 현재까지 DC 및 LC에 대한 안전성을 증명할 수 있는 구조인 Feistel 구조 및 MISTY 구조와 더불어 블록 암호의 설계 방법에 대한 다양성을 제공한다.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.4 no.3
• /
• pp.223-230
• /
• 1999

A conventional sliding mode control approach is often impractical or difficult when it is applied to high order process b because the number of tuning parameters in the sliding mode controller increases with the order of the plant. C Camacho(l996) proposed a design method of a fixed structure sliding mode controller based on a first order plus dead t time approximation to the higher-order process. But, his method has such problems as chattering, over‘shoot, and c command following due to the Taylor the approximation en‘ors for the time delay term of the first order model. In this p paper, a new design technique for a sliding mode controller based on the modified Taylor approximation considered a w weight is developed to improve the Camacho's problems.

• Journal of IKEEE
• /
• v.14 no.1
• /
• pp.8-16
• /
• 2010

This paper presents a design of the successive approximation ADC(SA-ADC) applicable to a midium-low speed analog-front end(AFE) for the maximum 15MS/s CCD image processing. SA-ADC is effective in applications ranging widely between low and mid data rates due to the large power scaling effect on the operating frequency variations in some other way of pipelined ADCs. The proposed design exhibits some distinctive features. The "differential capacitor-coupling scheme" segregates the input sampling behavior from the sub-DAC incorporating the differential input and the sub-DAC output, which prominently reduces the loading throughout the signal path. Determining the MSB(sign bit) from the held input data in advance of the data conversion period, a kind of the signed successive approximation, leads to the reduction of the sub-DAC hardware overhead by 1 bit and the conversion period by 1 cycle. Characterizing the proposed design in a 3.3 V $0.35-{\mu}m$ CMOS process by Spectre simulations verified its validity of the application to CCD analog front-ends.