• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2008년도 제39회 하계학술대회
• /
• pp.802-803
• /
• 2008

본 연구에서는 변압기의 권선간 전계 및 절연안전율 예측알고리즘을 개발하였으며, 이를 활용하여 극초고압 변압기의 절연구조개선 연구를 수행하였다. 개발된 알고리즘을 사용하면 한 번의 기본모델의 수치해석 결과만을 이용하여 다양한 권선간 거리 및 고체절연물의 개수 변화에 따른 전계 및 절연안전율의 예측이 가능하다. 본 알고리즘을 극초고압 변압기 주권선부 개선에 적용시킨 결과, 권선간 고체 절연물 개수를 조절하면 절연신뢰성 저하없이 주권선부 거리를 단축시킬 수 있음을 확인하였다. 또한, 본 예측 알고리즘의 활용가능성을 검증하고자 개선 모델의 절연안전율을 수치해석적 방법으로 계산하여 이를 예측 결과와 비교하였다. 그 결과, 본 예측 알고리즘으로 계산된 결과는 수치해석적 방법에 의한 결과에 비해 약 $1{\sim}2%$ 정도의 작은 차이가 발생하는 것으로 확인되었다. 따라서 본 연구를 통하여 개발된 전계분포 및 절연안전율 예측기법을 실제 설계에 적용할 수 있을 것으로 판단된다.

• 한국분무공학회지
• /
• 제10권1호
• /
• pp.10-16
• /
• 2005

To investigate the effect of shockwave on diesel spray characteristics under ultra high pressure injection, the velocity of spray tip and shock wave were investigated using the visualization of spray by schlieren method. Spray characteristics such as the spray radius, height, and droplets size were analyzed. It is found in this study that shock wave, produced by ultra high injection pressure, propagates faster than spray tip. Spray radius of right side of nozzle tip was shorter than that of left side and spray height of right side of nozzle tip was thicker than that of left side. Droplets sue was increased at 414MPa in injection pressure because of pressure gradient between inner and outer of tile spray caused by shockwave.

• 한국분무공학회지
• /
• 제9권3호
• /
• pp.42-49
• /
• 2004

The present article investigates the influence of droplet drag models on predictions of diesel spray behaviors under ultra-high injection pressure conditions. To consider drop deformation and shock disturbance, this study introduces a new hybrid model in predicting drag coefficient from the literature findings. Numerical simulations are first conducted on transient behaviors of single droplet to compare the hybrid model with earlier conventional model. Moreover, using two different models, extensive numerical calculations are made for diesel sprays under ultra-high pressure sprays. It is found that the droplet drag models play an important role in determining the transient behaviors of sprays such as spray tip velocity and penetration lengths. Numerical results indicate that this new hybrid model yields the much better conformity with measurements especially under the ultra-high injection pressure conditions.

• 한국자동차공학회논문집
• /
• 제13권6호
• /
• pp.7-12
• /
• 2005

In order to analyze the microscopic spray characteristics of free spray in ultra high pressure region, the droplets size and velocity of free spray injected under atmosphere condition were measured by PDPA. As injection pressure became ultra high pressure, the droplets size was decreased continuously due to the increase of mutual reaction between droplets and air. But the decreasing rate became moderate. The velocity was increased until 250 MPa, and then decreased over that of injection pressure. It was seemed that the droplet size was similar in range of $280\~350\;MPa$, but increased in 414 MPa, even though injection pressure was increased. The microscopic spray characteristics of free spray got worse in 414 MPa.

• 한국자동차공학회논문집
• /
• 제11권5호
• /
• pp.50-59
• /
• 2003

It was known that high pressure injection is an effective method to enhance thermal efficiency and decrease exhaust emissions in diesel engines. If injection pressure becomes ultra high, it is predicted that there may be a suitable injection pressure which the enhancement rate of spray characteristics is moderate. Also, there may be a limit injection pressure which spray characteristics is reversed and get worse. But these are unknown. To investigate a suitable injection pressure and a limit injection pressure, ultra high pressure injection equipment(UHPIE), which can realize the injection pressure of 3,200bar, was developed. UHPIE is a basic apparatus of single shot injection, and ultra high pressure was achieved by second stage rapid compression in short time. From the evaluation of UHPIE, a injection curve like a conventional diesel engine(jerk type) was realized. Also, it was proved that repetition of experiment was excellent. Therefore it was found that there was no problem to perform the study on the ultra high pressure injection with UHPIE. Consequently, the foundation of the study on ultra high pressure injection could be established.

• 한국추진공학회지
• /
• 제19권6호
• /
• pp.81-90
• /
• 2015

램제트 엔진, 스크램제트 엔진과 같은 극초음속 공기흡입식 추진기관을 지상에서 시험하기 위해서는 극초음속 추진기관이 작동하는 고고도, 고 마하수 환경을 모사해야 한다. 따라서 고압, 고온 환경을 조성하여 고고도 고 마하수 환경을 지상에서 구현해야 한다. 본 논문에는 한국항공우주연구원에서 설계 및 제작한 극초음속 공기 흡입식 추진기관 지상 시험설비의 구성과 특성에 대하여 소개한다.

• 한국자동차공학회논문집
• /
• 제13권3호
• /
• pp.131-137
• /
• 2005

Ultra high pressure injection equipment was developed to estimate and analyze the spray characteristics in ultra high pressure injection. Spray patterns were visualized by schlieren method and analyzed in ultra high pressure. Spray tip penetration, spray thickness, spray volume, and entrained air mass increased with the increase of the injection pressure. But over 2,800 bars of the injection pressure region, it was shown that the rate of improvement was not increased remarkably ,and the spray characteristics such as spray penetration, volume, and entrained air mass were reversed and got worse at 4,140 bars.

• 한국분무공학회지
• /
• 제7권4호
• /
• pp.16-22
• /
• 2002

The characteristics of free spray with ultra injection pressure was analyzed to clear the limit pressure of diesel engine. To obtain final goal, ultra high pressure injection equipment was developed, spray patterns were visualized under various ultra injection pressures. Spray penetration and spray width, volume and entrained air mass were increased with the increase of injection pressure. Sauter mean diameter and injection durstion wert decreased. But over 3,000bar of ultra injection pressure region the rates of increase show almost similar and finally the reversed tendencies at 4,140bar.

• 전기저널
• /
• 통권450호
• /
• pp.72-77
• /
• 2014

1962년 당시 중공업 불모지였던 이 땅에 본격적인 중공업 시대를 개막한 효성은 반세기를 훌쩍 넘긴 오늘에 이르기까지 끊임없는 변화와 개혁을 통해 세계적인 기업으로 발전해 왔다. 중전기기 신제품 개발에 힘을 기울여온 효성의 발자취는 우리나라 전력산업의 발전과 궤를 같이 하고 있다고 할 정도로 효성은 국내 전력산업사(史)에 있어 빼놓을 수 없는 존재이다. 154kV 환상망 구축사업의 중추적 역할 수행, 345kV 전력기자재 최초 납품, 765kV 초고압 변압기 국내 최초 개발 및 수출, 800kV급 2점절 초고압 차단기(GIS, Gas Insulated Switchgear) 세계 최초 개발, 1,100kV 극초고압 GIS 국내 최초 순수 독자 개발 등 효성의 초고압 분야는 화려한 역사를 자랑한다. 그러나 최근 들어 세계 초고압 분야의 시장 성장세가 둔화되고 있다. 이에 비단 효성 뿐 아니라 국내 초고압 관련 기업들의 움직임도 주춤한 상태다. 문제는 이러한 난관을 어떻게 빨리 헤쳐 나가느냐에 있는데, 효성이 선택한 방법은 '고객제일주의'와 '신기술 개발'이다. 이는 기본 중의 기본이지만, 이 기본을 준수하기가 얼마나 어려운지는 모두 알 것이다. 즉 50여년 전 아무 것도 없는 중공업 분야에서 새로운 역사를 창조하겠다던 '초심'으로 돌아가 지금부터 다시 새 역사를 써나가겠다는 의지를 불태우고 있는 것이다. 그 중심에 우뚝 서 효성의 초고압 전력 분야를 책임지고 있는 전력 퍼포먼스유니트를 소개한다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2003년도 추계학술대회
• /
• pp.442-447
• /
• 2003

The characteristics of instantaneous wall-surface temperature of impinging plate in case of ultra high pressure injection have been measured and analyzed by using thin film instantaneous temperature probe and ultra high pressure injection equipment. The decreasing rate of temperature was greater in case of higher temperature of impinging plate. Temperature drop was largest at center of piston and it was slight for others. Instantaneous temperature decreases rapidly with increasing injection pressure. But above 2,500bar of injection pressure, the decreasing rates are slightly affected by increasing injection pressure.