• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.45 no.7
• /
• pp.594-599
• /
• 2017

In this thesis, the development and the verification of the test-aid are described, providing various attitude errors through the electric stimulus to the Sun sensor. This test-aid for 2-axis analogue Sun sensor is used for polarity test in the assembly stage for GK2 satellite. The test-aid used for GK2 satellite is for COMS satellite and, due to the failure risk, manufactured by domestic company. The characteristics of the COMS test-aid used for GK2 satellite and the manufactured test-aid are showed with similar through the several tests. In this thesis, there are conformed the capability for replacing of test-aid because the characteristics of the manufactured test-aid is acquired same as that of the COMS test-aid using the controller tuning functions.

• Korean Journal of Plant Tissue Culture
• /
• v.27 no.1
• /
• pp.19-23
• /
• 2000

The experiment was carried out to investigate the influence of light condition and polarity of explant on adventitious shoot formation from cotyledon of apple in vitro The treatment of light culture after 10days dark treatment showed effective result than other treatments on the rate of adventitious shoot formation on light intensity treatments and also the treatment of blue light treatment after 4days dark treatment showed more effective result than other treatments in light quality treatments. The polarity of explant influence on adventitious shoot formation. Adventitious multiple shoot formation occured at the proximal end of an excised cotyledon. In other words. shoot organogenesis occured at the proximal cut surfaces of both proximal and distal explants rather than at the distal cut surface of proximal explants.

• Applied Chemistry for Engineering
• /
• v.24 no.5
• /
• pp.476-482
• /
• 2013

In this work, the effects of electrochemical oxidation of carbon fiber surfaces on mechanical interfacial properties of carbon fibers-reinforced polarized-polypropylene matrix composites were studied with various current densities during the treatments. Surface properties of the fibers before and after treatments were observed by SEM, AFM, XPS, and contact angle measurements. Mechanical interfacial properties of the composites were measured in terms of critical stress intensity factor ($K_{IC}$). From the results it was found that $O_{1s}$ peaks of the fiber surfaces were strengthened after electrochemical oxidation which led to the enhancement of surface free energy of the fiber, resulting in good mechanical performance of the composites. It can be concluded that electrochemical oxidation of the carbon fiber surfaces can control the interfacial adhesion between the carbon fibers and polarized-polypropylene in this composites system.

• Korean Journal of Cognitive Science
• /
• v.18 no.3
• /
• pp.285-303
• /
• 2007

Transient attention impairs observers' temporal resolution in a cued location. This detrimental effect of attention was ascribed to inhibitory connections from parvocellular to magnocellular neurons [1]. Alternatively, the difficulty might arise because attention facilitates the temporal summation of two successive stimuli. The current study examined this hypothesis by manipulating the luminance polarity of the stimuli against a background. Attention should not modulate temporal summation of two anti-polar stimuli because these are processed in separate channels. Indeed, observers judged the temporal order of two successive stimuli better in the cued location than in the uncued location when the stimuli were opposite in polarity, but temporal resolution was worse in the cued location when the stimuli had the same polarity. Thus, attentional effects on temporal resolution may be attributed to temporal summation rather than parvocellular inhibition of magnocellular activity.

• Polymer(Korea)
• /
• v.26 no.2
• /
• pp.209-217
• /
• 2002

We studied the mechanism of orientation of polyimide molecules which were irradiated by polarized UU (PUV) using polarized Fourier transform infrared (FT-IR) spectroscopy and ultraviolet (UV) spectroscopy, According to the measured UV spectra, we found PI films mainly absorb UV light less than 350 nm wavelength, therefore, UV light less than 360 nm induces photochemical reaction of PI. PUV irradiation of PI films caused decrease of all peak intensities in the FT-IR spectra. except the newly formed broad peak at $3244 cm^{-1}$, due to degradation of the PI molecules. The remaining PI molecules after photo-degradation showed predominantly perpendicular molecular orientation to the irradiated PUV polarization direction, due to the preferential degradation of PI molecules parallel to irradiated PUV polarization direction. However the rubbing of PI films induced reorientation of the PI molecules parallel to the rubbing direction. We also investigated the alignment of the liquid crystal by rubbing or PUV irradiation. Liquid crystals align perpendicular to the PUV polarization direction and parallel to the rubbing direction.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.27 no.8B
• /
• pp.809-818
• /
• 2002

In this paper, we propose a fast cell search algorithm keeping compatible with the standard cell search algorithm of the WCDMA system. The proposed algorithm can acquire the synchronization of slot and frame times, and the code group identification using only one synchronization channel while the standard algorithm employs two synchronization channels called P-SCH and S-SCH. The proposed synchronization channel structure is the same as the P-SCH structure of the WCDMA system. However, the P-SCH is modulated with a specific polarization code, which is one element of new code group codes. The proposed algorithm can reduce both the BS' transmission power and the complexity of receiver as compared with the conventional one since only on synchronization channel is used. It is shown through the computer simulation that the proposed algorithm yields a significant improvement in terms of cell search time compared with the standard especially in low SNR environments.

• KSBB Journal
• /
• v.18 no.5
• /
• pp.385-392
• /
• 2003

Biodegradable poly (L-lactide) (L-PLA) solution in methylene chloride was precipitated into microparticles by using supercritical carbon dioxide modified with polar cosolvents. The effects of the amount of polar cosolvents, solution concentration, temperature, and solution flow rate on the formation of microparticles were investigated. The mean particle size was found to increase with the increase of solution concentration and flow rate. It was also observed that the particle size not only increases but the size distribution also becomes less uniform as the temperature increases. The percent recovery of microparticles was found to be 30∼40% at all experimental conditions. The supercritical carbon dioxide modified with methanol and ethanol was employed to enhance the recovery, resulting in significant improvement up to about 80 and 70%, for methanol and ethanol, respectively. Furthermore, the mean diameter of L-PLA microparticles was found to be less than 1 $\mu\textrm{m}$ for both cosolvents.

• Applied Chemistry for Engineering
• /
• v.1 no.1
• /
• pp.73-82
• /
• 1990

Rosin-maleic anhydride adduct (RMA) was synthesized from rosin and maleic anhydride. The polyamideimides were obtained by reacting the adduct with two aromatic diisocyanates using sodium methoxide as catalyst. The yield and the inherent viscosity of polymers obtained by the reaction in NMP solvent were low because of the possible reaction of NMP solvent with diisocyanate monomer. The polymers were synthesized in solvent mixture of NMP and cosolvents such as xylene, acetophenone, benzonitrile, and nitrobenzene in order to minimize the side reaction of NMP with diisocyanates. The yield of polymer obtained by the reaction in NMP-nonpolar cosolvent mixtures was about 70% and that obtained by the reaction in NMP-polar cosolvent mixtures was over 90%, respectively. The polymers were either amorphous or poorly cystalline, and soluble only in highly polar solvents. The inherent viscosity of polymers ranges from 0.12-0.26dl/g. The results of thermal analysis showed that the polymer had good thermal stability with initial decomposition temperature over $330^{\circ}C$.

• Korean Chemical Engineering Research
• /
• v.58 no.1
• /
• pp.122-126
• /
• 2020

In this study, we produced the micropatterned channel system using polydimethylsiloxane (PDMS) and micromolding in capillaries (MIMIC) technology and evaluated cellular polarity signals through high-resolved imaging at the single-cell level. In cells treated with platelet-derived growth factor (PDGF), three types of key signals in cell migration; phosphoinositide 3-kinase (PI3 K), Rac, and Actin, were strongly activated in the front area compared to the rear region, whereas myosin light chain (MLC) showed no notable activity in the front and rear areas. Our results will, therefore, provide important information and methodology for studying the correlation between cell polarity signals and cell migration under the newly defined microenvironment.

• Journal of the Korean Chemical Society
• /
• v.32 no.2
• /
• pp.85-93
• /
• 1988

Solvolyses of t-butylhalides (X = Cl, Br, I) in quasi isodielectric solvent system, MeOH-nitromethane, MeOH-nitrobenzene and MeOH-ethyleneglycol have been studied kinetically. Methanolyses for t-butylhalides in MeOH-NM and MeOH-NB show rate maxima at 40~100 % (v/v) MeOH. The rate maxima observed have been interpreted as a result of cooperative enhancement of polarity-polarizability and hydrogen bonddonor ability of solvents. The influences of polarity-polarizability and hydrogen bonddonor ability on reactivities of substrates have been discussed in terms of Y value changes. The solvolysis rates for t-butylhalides in E.G. are more than 20 fold faster than those in MeOH and this was attributed to the solvent structure of E.G.