• Water for future
• /
• v.27 no.2
• /
• pp.63-72
• /
• 1994

In this study, hydraulic characteristics for upstream migration of fish in a pool-and-weir fishway were analyzed through experiment. The results showed that streaming flow was preferable to plunging flow for upstream migration of fish and it was not good to make an orifice beneath the septum since it generates turbulent jet and eddies. Protrusions on the side wall of fishway were preferable to grooves since they decelerate flow velocity and make upstream migration easy. A vertically movable septum was necessary for a flushing of deposited bed material, and net installing over fishway was also needed for birds not to approach the fishway and eat fish.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.32 no.11B
• /
• pp.663-672
• /
• 2007

This paper proposes an algorithm for design of a multiple ring network that can be applied to an arbitrary topology in the WDM optical transport networks. Especially, we suggest an integer linear program(ILP) formulation with the objective of minimizing the total cost of nodes based on the reconfigurable OADM(ROADM) architecture and propose a heuristic algorithm to reduce computational complexity of the exact problem formulation. To evaluate the performance and validity of this scheme, we applied it to an NSFnet topology assuming the dynamic or static traffic condition and compared it with a mesh methodology about capacity of connection requests and the total cost of the nodes.

• Computational Structural Engineering
• /
• v.12 no.1
• /
• pp.86-94
• /
• 1999

예비구조설계에서는 구조시스템 대안의 생성과 발전, 여러 방법과 대상에 따른 해석과 설계 다양한 요구조건과 구조적 특성을 고려한 여러 구조시스템 대안의 비교 및 선택 과정을 거친다. 그리고, 이러한 각 과정은 구조설계자의 경험적 지식을 바탕으로 하는 종합적인 사고와 판단에 따라서 단계적, 반복적으로 이루어진다. 그러므로, 예비구조설계에서는 정형화된 자료와 작어뿐 아니라 비정형화된 자료와 작업도 처리해야 한다. 따라서, 컴퓨터는 정형화된 자료와 작업을, 구조설계자는 비정형화된 자료와 작업을 직접 처리하고 이를 상호작용을 통하여 교환 및 지시하는 방식, 즉 구조설계자와 컴퓨터의 역할분담에 기초한 상호작용방식을 통하여 예비구조설계에 컴퓨터를 효율적으로 활용할 수 있을 것이다. 구조설계자와 컴퓨터의 역할분담에 기초한 상호작용을 원활히 지원하기 위해서는 구조시스템 대안의 기하학적 향상, 재료에 대한 자료를 효과적으로 제시할 수 있는 3차원 관점, 각 구조시스템 대안을 검토하고 비교하는 사항이 되는 다양한 요구조건에 대한 자료들을 관리하고 제시할수 있는 요구조건 관점이 필요하다. 그리고 예비 구조설계가 진행되어 온 과정, 방향, 설계의도등의 파악을 위한 바탕이 될 수 있는 작업과정관점, 구조시스템 대안 발전 관점이 필요하다. 예비구조설계의 프로세스 조절을 위한 상호작용을 효과적으로 지원하기 위해서는 컴퓨터가 수행 할 수 있는 정형화된 작업들을 예비구조설계의 진행순서인 구조시스템 대안의 생성과 발전, 구조시스템 대안의 해석과 설계, 구조시스템 대안의 선택에 따라서 나열하여 제시할 필요가 있다. 이를 통해서 구조설계자는 자신의 판단에 따라서 다음에 수행해야 할 작업을 결정하고, 그에 해당하는 정형화된 작업을 컴퓨터가 제시한 작업 중에서 선택하고 그 수행을 지시하여 자신의 경험적 지식과 설계의도에 맞추어 예비구조설계의 프로세스를 조절할 수 있다.정조합력은 유의차가 컸으나, 상반조합 능력은 없었다. 교배친의 우성효과는 컸다. 잡종강세 환경변이 및 상가적 작용도 컸다. 우성의 방향은 정의 방향이었으므로 우성귀전자가 크게 작용하였다. 이들 형질들의 귀전자들은 초우성을 나타내었다. 교배친의 자견층중의 우성순서는 잠120>잠114>잠108>잠119>잠118>잠107>잠117>잠113 순이었고, 웅견층중에서는 잠114>잠108>잠120>잠117>잠118>잠107>잠119>잠119>잠113 순이었다. 자견층 비율에서는 광의의 귀전력이 협의의 귀전력보다 컸고, 웅견층 비율에서는 같았다, 견층 비율에서는 일반조합 능력은 크게 나타났으나, 특정조합 능력과 상반조직 능력은 나타나지 않았다. 자견층 비율에서 교배친의 우성효과는 컸다. 자견층 비율에서는 교배친의 우성효과는 적었다. 자웅견층 비율의 잡종 강세는 적게 나타났다. 환경변이와 상가적 작계는 자웅견층 비율에서는 크게 나타났다. 우성의 방향은 자견층 비율에서는 정의 방향으로 우성 귀전자가 크게 작용하였으며, 자견층 비율에서는 정의 방향으로 우성 귀전자가 부분적으로 작용하였다. 교배친의 자견층 비율의 우성순서는 잠117>잠114>잠108>잠120>잠118>잠119>잠107>잠113 순이었고, 자견층 비율에서는 잠114>잠117>잠108>잠118>잠107>잠119>잠113>잠120의 순이었다.지방산의 조성이 많은 차이를 보였다.{2+}$ 26 및 $Na^+$ 26 mg $L^{-1}$이었다. 양액 재배 후 버려지는 폐양액 중의 무기성분 함량은 양액재배에 이용되는 원수에 비해 상당히 높아졌다.료로서 응용 가능성이 있음을 시사한다.약재료인 약초류 등을 이용하였는데 오랫동안 푹 삶아 그물에 곡류 등을 넣어 죽이나 밥으로 조리하였으며 면으로도 조리하였다. 이상과 같이 조선시대 주식류의 종류 및 조리방법에 대한

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.27 no.4
• /
• pp.191-195
• /
• 2017

The microstructures of nonwoven fabric with and without nanofibers used as a filter for air purification type mask were investigated using scanning electron microscope. Moreover, we proposed a new mask design which is effective in the improvement of the fine dust blocking property. When comparing to nonwoven fabrics of which an average diameter was $25{\mu}m$, the nanofibers formed by the electrospinning process had a tight mesh structure arranged irregularly with a relatively large specific surface area, which could be associated with their much smaller diameter ranging from 25 to 120 nm. Such a prominent structural feature at nanofibers led to mechanical adsorption of fine particles, resulting in enhancement of filtering behavior maintaining high permeability. In addition to the excellent performance of the mask filter, wearing the mask properly is expected to maximize the blocking property of fine dust. To meet such a requirement, a new mask design that can be closely attached to the face in order to effectively block fine dust entering the gap between the face and the mask.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.14 no.3
• /
• pp.115-122
• /
• 2004

When porous materials are dried, the particles flocculate into fish-net structure in gel phase. In order to exactly analyze the stress distribution of porous materials during drying process, the elastic tensor of microscopic gel structures has to be predicted considering pore shapes as well as porosities of porous materials. The elastic characteristics of porous materials associated with porosities were predicted analyzing microscopic gel structures with circular and cross pores via homogenization method and the drying processes of the electric porous ceramic insulator were simulated using finite element method (FEM). Comparing analysis results between consideration and negligence of pores, the deformed shape and distributions of temperature and moisture were similar but the residual stress was significantly different.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.36 no.10
• /
• pp.1011-1017
• /
• 2012

We report the development of an optical micro-nanolithography method by using a roll-type mask. It includes phase-shift lithography and photolithography for realizing various target dimensions. For sub-wavelength resolution, a structure is achieved using the near-field exposure of a photoresist through a cylindrical phase-mask, allowing high-throughput continuous patterning. By using a film-type metal mask, continuous photolithography was achieved, and this method could be used to control the period of resultant patterns in real time by changing the rotating speed of the cylinder mask. As an application, we present the fabrication of a transparent electrode in the form of a metallic mesh by using the developed roll-type photolithography process. As a result, a transparent conductor with good properties was achieved by using a recently built cylindrical phase-shift lithography prototype, which was designed for patterning on 100-mm2 substrates.

• Journal of Institute of Control, Robotics and Systems
• /
• v.4 no.6
• /
• pp.802-810
• /
• 1998

The purpose of this study is to find the analytic solution of determining the optimal capacity of processes and storages to meet the product demand. Recent trend to reduce product delivery time and to provide high quality product to customer requires the increasing capacity of storage facilities. However, the cost of constructing and operating storage facilities is becoming substantial because of increasing land value, environmental and safety concern. Therefore, reasonable decision making about the capacity of processes and storages is important subject for industries. The industrial solution for this subject is to use the classical economic lot sizing method, EOQ(Economic Order Quantity) model, trimmed with practical experience but the unrealistic assumption of EOQ model is not suitable for the chemical plant design with highly interlinked processes and storages. This study, a first systematic attempt for this subject, clearly overcomes the limitation of classical lot sizing method. The superstructure of the plant consists of the network of serially and/or parallelly interlinked processes and storages. A novel production and inventory analysis method, PSW(Periodic Square Wave) model, is applied. The objective function of optimization is minimizing the total cost composed of setup and inventory holding cost. The advantage of PSW model comes from the fact that the model provide a set of simple analytic solution in spite of realistic description of material flow between process and storage. The resulting simple analytic solution can greatly enhance the proper and quick investment decision for the preliminary plant design confronting diverse economic situation.

• Journal of the Semiconductor & Display Technology
• /
• v.19 no.4
• /
• pp.11-17
• /
• 2020

In this study, a new method for fabricating flexible transparent electrodes based on silver nanowire-polymer (AgNW-PEDOT:PSS) composite materials having a mesh pattern formed by a solution-based process without lithography was proposed. By optimizing conditions such as the amount of ultraviolet (UV) photosensitizer injected into the suspension of AgNW and PEDOT:PSS, UV exposure time, and deionized (DI) washing time, a clear and uniform mesh pattern was obtained. For the fabricated AgNW-PEDOT:PSS-based mesh-type electrodes, characteristics such as electrical sheet resistance, light transmittance, haze, and bending flexibility were analyzed according to the mixing ratio of AgNW and PEDOT:PSS included in the suspension. The fabricated mesh electrodes typically exhibited a low electrical sheet resistance of less than 20 Ω/sq while maintaining a high transmittance of 80% or more. In addition, it was confirmed from the results of analyzing the effect of PEDOT:PSS on the characteristics of the mesh-type AgNW-PEDOT electrode that the optical visibility was greatly enhanced by reducing the surface roughness and haze, and the bending flexibility was remarkably improved.

• Korean Journal of Plant Taxonomy
• /
• v.43 no.3
• /
• pp.208-222
• /
• 2013

In this paper, we conducted the taxonomic study of the tribe Epilobieae Endl. and concluded that a total of nine taxa, including one Chamerion (Raf.) Raf. ex Holub and eight Epilobium L., exist in Korea. Although C. angustifolium subsp. angustifolium has been placed traditionally either in Epilobium or Chamaenerion, it can be clearly distinguished from the species of Epilobium by having alternate leaves, slightly zygomorphic flowers, non-clefted petals, and equal length of 8 stamens, supporting the recognition of genus Chamerion. All but one species of Epilobium, E. platystigmatosum, was investigated for the surface of seeds using scanning electron microscope (SEM). The seed sculpture of Korean Epilobium can be classified into three types, i.e., papillose, reticulate, and ridged. E. ciliatum subsp. ciliatum is the only species Epilobium, which has the ridged seed sculpture. E. amurense subsp. cephalostigma can be distinguished from conspecific E. amurense subsp. amurense based on leaf shape, trichome shape and distribution, size and habit. Both E. fastigiatoramosum and E. palustre have entire leaf margins, but they can be distinguished based on leaf shape, stigma, and seed sculpture; the former has elongated elliptic leaves, capitate stigma, ridged seed sculpture, whereas the latter one has elongated lanceolate leaves, club-shaped stigma, and reticulate seed sculpture. Finally, we report the first record of E. platystigmatosum in Korea, and further comparative study including conspecific populations from Japan and China can clarify the occurrence of this taxon in Korea.

• Journal of Korean Philosophical Society
• /
• v.105
• /
• pp.269-290
• /
• 2008

The purpose of this paper is to explore the possibility of backwards causation. For study, this paper was divided into four views as follows: The first view was sometimes suggested by the people such as M. Dummett who distinguished observers from behaviors. According to observers' view, backwards causation is impossible, whereas behaviors' view possible. However, in a real or genuine sense, it is incorrect for us to argue for impossibility of backwards causation from the observer aspect. The second view was supported by J. H. Schmidt. He analyzed the possibility of backwards causation in terms of macro and micro level analysis about the causal events. According to micro level analysis, backwards causation is possible, but macro level analysis impossible. Usually the latter makes the former something miraculous. Under the macro level analysis, backwards causation, at first, seems to be miraculous phenomena which belongs to the micro level analysis. The third view had to do with physical equation, and the fourth view physical phenomena, respectively. John Earman argued for the backwards causation by the transformation from Lorentz­-Dirac equation to a second-order integro-differential one in the field of electrodynamic acceleration. His argument was criticized because of his misunderstanding about the relationship between two equations. On the other hand, Phil Dowe defended a version of Reichenbach's own theory about the direction of causation founded on the fork asymmetrical causal relation. However his view was different from Reichenbach's because the former defended the backwards causation model of Bell phenomena in quantum mechanics. On the contrary, Reichenbach put stressed on the priority of cause in the causal process. Subjectivism has recently been defended by H. Price, under the label of perspectivism. According to him, in a certain sense causal asymmetry is not in the world, but is rather a product of our own asymmetric perspective on the world. He also suggested causal net, the symmetry of microphysics, and so on. As mentioned above, there are many kind of suggestions of backwards causation. However none of them replaced objectively the main streams of the direction of causal process. The main stream has been usually defended by pragmatical ground. That is, effects do not precede their causes although causes cannot be without their effects.