• Convergence Security Journal
• /
• v.13 no.4
• /
• pp.85-92
• /
• 2013

Today we have an obligation to pass the beautiful earth and enrich people's lives to next generations. According to the keynote, governments have a lot of resources to support the smart grid policies. Also the demand of the implementation of smart home applied the concept of smart grid is increasing rapidly. But the construction of smart home is centered on a new public housing except the pre-existing house which is counted for most of more than 90% of total. In this study, we suggest the implementation solution to make smart-homelike for the pre-existing houses without additional wiring or construction. We develop the technology reducing the unnecessary standby power 800mW to 20mW drastically. If we apply this technology, by the power off of main IC the actual power depends on the consumption of minimal devise located on the AC input side. Then the standby power becomes approximately 20mW(110ac).

• Journal of the Korea Society for Simulation
• /
• v.24 no.3
• /
• pp.97-105
• /
• 2015

This paper is to analyze the efficiency of power consumption in logistic systems that are based on self-driving roller conveyors by the simulation technology. The improvement of the efficiency brings advantages for reducing greenhouse gas emission and logistics costs. A self-driving roller conveyor is operated only when products are loaded on itself. Thus, the self-driving roller conveyor systems consume less electric power than continuous-driving roller conveyor systems. In this paper, we design a DEVS (Discrete-Event based System) based simulation model and construct self-driving roller and continuous-driving roller conveyor models. For the verification and validation of the designed simulation system and conveyor models, we model a corresponding logistic model for the experimental environment and compare between the model and a real system. The main objective of this paper is to describe the power consumption advantage of self-driving roller conveyor based logistic systems using a simulation method.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.22 no.11
• /
• pp.1524-1530
• /
• 2018

In this paper, we designed a product that can prevent environmental pollution, waste of resources, and leakage of foreign currency by commercializing a green IT solution by merging a used smart phone with the IoT object communication technology for the first time in the world. For the experiment of the designed system, various performance and communication condition was experimented by installing it in the actual crop cultivation facility. As a result, when a problem occurs, the alarm sound and video notification are generated by the user's smart phone, and remote control of various installed devices and data analysis in real time are possible. In this study, it is thought that the terminal management board developed for the utilization of the used smart phone can be applied to various fields such as agriculture and environment.

• Journal of the Korea Convergence Society
• /
• v.11 no.12
• /
• pp.97-103
• /
• 2020

This study sets the solar power system installed and applied to the vertical side wall among the photovoltaic systems in the building as the scope of the research. The theoretical background was considered through literature research as a research method, and the current status, trends and characteristics of solar generator design installed and applied to domestic and foreign vertical side walls were then investigated and analyzed cases. As a result, the importance and necessity of photovoltaic generators, potential for power generation and growth were identified, and positive factors and directions were found for improving aestheticity. Based on this point, we would like to propose expected effects that can be applied to photovoltaic system design installed and applied to vertical side walls in the future, and confirm the direction and significance of the improvement of aesthetic quality of the proposal for development of thin film solar cell design technology using green facade design.

• Korean Journal of Heritage: History & Science
• /
• v.56 no.2
• /
• pp.80-98
• /
• 2023

In the late Joseon Dynasty, when the bride would ride a palanquin when she went to live with her in-laws, it was a custom to cover the palanquin with tiger skin to ward off misfortunes that may come her way. The higher classes used tiger skin or leopard skin for this purpose, but the common people had to substitute this expensive item with a tiger pattern painted on a blanket. Such blankets were called hotanja, hogu, hoguyok and the like. The term "hotanja" is a pure Korean word. It is not known when the cover for the bridal palanquin was first used, but it was popular from the end of the 19^th century and then gradually disappeared. This is due to the introduction of new Western style weddings that eliminated the need for a bridal palanquin. The tiger print blanket was used not only to cover the bride's palanquin but also to cover a table or floor during the wedding ceremony. This study ran a material analysis on nine pieces of tiger print blankets. All of the blanket artifacts examined in this study had an outer cover and a lining made of fabric that used cotton thread for the warp and wool thread for the weft. Two kinds of wool were found in the weft thread in the outer covers: fat-tailed sheep hair from China and goat hair for carpets from the Hebei province, China. Records show that "blankets with painted tiger patterns" were imported from Russia, and the imported blankets were from Russia and China. The outer cover can be categorized into six types, and the lining into three types depending on the weave and direction of the thread twist. The hem facing can be divided into four types. The lining and outer cover use the full width of the fabric, which was woven in wide widths of 135 cm or wider. The tiger pattern on the blanket was made by stenciling. The stencil design of the body and tail of the tiger were placed on a red blanket to be painted in white, and then the background color of the tiger, which is yellow, would be painted over the white, and then black stripes would be added. The pattern of the tiger varies, which shows that the blankets were made by various craftspeople. The pattern of the tiger print blanket is usually of a tiger lying down, but there were tiger print blankets with a tiger standing up. The pattern of the tiger grew smaller over time, and flower patterns were added in the background. Decorative elements were gradually added to the tiger print blanket patterns, but its function as a palanquin cover became lost. By taking the features of tiger print blankets into consideration, it can be assumed that there are imported pieces among the remaining pieces, and were produced in various places because it was popular at that time.

• Korean Chemical Engineering Research
• /
• v.50 no.5
• /
• pp.795-801
• /
• 2012

Nanoparticles have received significant attention because of their unusual characteristics including high surface area to volume ratios. Thiol ligand have been used as stabilizers of metal nanoparticles since Brust et al. They reported the preparation method of ligand capped metal nanoparticles by protecting the nanoparticles with a self-assembled monolayer of dodecanethiolate. In this method, volatile organic compounds (VOCs) were used as sovents. This study was carried out to replace these VOCs with room temperature ionic liquids (RTILs). We used two type of ILs to prepare metal nanoparticles. One is a hydrophobic IL, [BMIM][[$PF_6$] (1-Butyl-3-methylimidazolium hexafluorophosphate) purchased from IL maker, C-Tri from Korea and the other one is a hydrophilic one, [BMIM][Cl] (1-Buthy-3-methylimdazolium chloride) sinthesized by us. In the case of preparing Ag and Au nanoparticles using [BMIM][Cl], we didn't use phase transition reagents and ethanol because it has hydrophilic property and preparing Au, Ag nanoparticles using [BMIM][[$PF_6$] the method is as same as Brust et al.'s except using [BMIM][[$PF_6$] instead of organic solvent because it has hydrophobic property. FT-IR and UV-vis, TEM, TGA analysis have been used in an attempt to determine the particle size and verify functional groups. The particle size obtained from TEM was very similar to those obtained by Brust et al. This is a clear example of ligand capped metal nanoparticles prepared using ionic liquids. And the experimental result demonstrated ionic liquids can act as a highly effective medium for the preparation and stabilization of gold and silver metal nanoparticles.

• Science of Emotion and Sensibility
• /
• v.13 no.3
• /
• pp.573-580
• /
• 2010

The earlier KANSEI evaluation had to choose not to overlap the opposite meaning of the words, had to choose that some figures are shown step by step and had to choose be prepared things in advance. However, The Study shows a method which visualizes the imprecise evaluations of human without choosing evaluation items which are not prepared figures. The program is used the way which is entered by hand-drawing that the subjects use the way to enter their subjective feelings about the evaluations presented by using the mouse or the graphics tablet. It is possible to express imprecise things about evaluations and the method of drawing is free. The program provides that we can express our thinking by drawing and there are a few limits and the prescribed standard. The area ratio of each circle is expressed as a pie chart and the area of circle what is drawn which is counted automatically at the same time. These things are possible not only to modify a transparency, a thickness of a line, a color and the area of circle what is drawn, but also to adjust the area of circle. The conceptual model is visualized that expresses something by hand-drawing such as a circle. The conceptual model has wide range of applications such as a personnel evaluation, a suffering evaluation and product evaluation. The program currently has been testing the effective of the program's possibilities which is used with the personnel appraisal tool of the nurses themselves who work in nurse support department where the St. Marianna University School of Medicine Hospital is. And also the program is proceeding with development to visualize the conceptual model by dynamic interfaces effectively and the program is applied such as KJ method and a program is used to express the kind of the patient's pain and its level.

• Asian Journal of Turfgrass Science
• /
• v.26 no.2
• /
• pp.135-139
• /
• 2012

Creeping bentgrass (Agrostis stolonifera) is one of the most popular turfgrasses for high-quality playing surface such as putting green on golf courses and athletic fields. Continues damage such as divot injury on creeping bentgrass is major issue to maintain golf course properly. Although plentiful researches to maximize divot resistance have been reported, minimal research has focused on relation between nitrogen (N) sources and divot resistance. The study was conducted to determine the effect of N source for turfgrass divot recovery and overall tee performance. Eleven fertilizer treatments as N sources were applied to creeping bentgrass 'Penncross'. Before the first application, divot injuries were simulated by removing a core of soil and turfgrass from established plots and backfilling with native soil. Data collection included turfgrass color and quality. N release speed did not influenced divot recovery. Frequency of urea application had no effects on divot recovery. Urea with split application had no difference with no treatment for divot recovery. Polyon product especially polyon mini (41-0-0) had the best performance for divot recovery and for maintaining better turfgrass quality. Overall, small particle size of slow-release N form would influence creeping bentgrasss to recover divot damage.

• Journal of Global Scholars of Marketing Science
• /
• v.16 no.1
• /
• pp.73-91
• /
• 2006

This study was conducted for market segmentation of cruise tourist according to launching the "T" in Busan. Benefit segmentation was used to identify attributes of cruise services; importance of ship's physical appearance and importance of service and activities. 24 attributes were distilled to 5 factors: 'Facility & Service', 'Atmospherics of cruise ship', 'Escape', 'Choice', 'Safety'. A K-means cluster analysis identified three clustered segments for five importance factors in which high loyalty customers were found to be the most important segment. Based on the findings, three distinct groups were formed: 'Moderators', 'High Loyalty', 'Spurious'. The most important factors by high loyalty groups were identified 'Safety', 'Facility & Service', 'Atmospherics of cruise ship', 'Choice', 'Escape' in order. The results of the study showed statistically significant differences among the three groups in terms of demographic and behavioral variables. Especially, the target market should be considered by 'High Loyalty' group and 'Moderators' group in order. Positioning strategies and marketing mix strategies for effectively targeting the segments were discussed.

• Journal of Korea Technology Innovation Society
• /
• v.20 no.2
• /
• pp.430-457
• /
• 2017

The purpose of this study is to present meaningful information and policy implications concerning the determinants of royalties of technology transfer to stakeholder. To identify key determinants of royalties in technology transfer, this study conducted AHP survey analysis (Survey period: 01/09~31/10, 2016) of 96 government-funded research centers and 85 companies which were participants of the R&D project "Next Generation BioGreen21" of R.D.A in the "N" center from 2011 to 2015. Research results show that both parties acknowledge 'Technical considerations for determining the profitability of the technologies' and 'The interest and willingness of the management group' as critical factors for the determinants of royalties. The difference of each party is that private companies acknowledge 'Available budget plan' as a critical factor while the government-funded research centers value 'Market competitiveness'. These findings suggest four main policy implications which are the investigation of technological demands reflecting specific needs of industrial sites, the diversification of royalty payments for private companies, the differentiated research evaluation system for the purpose of technology transfer and the planning of public R&D project reflecting research time span of private companies.