• Journal of the Microelectronics and Packaging Society
• /
• v.26 no.4
• /
• pp.163-169
• /
• 2019

Sn-Pb solder alloys in electronics rapidly has been replaced to Pb free solder alloys because of various environmental regulations such as restriction of hazardous substances directive (RoHS), European Union waste electrical, waste electrical and electronic equipment (WEEE), registration evaluation authorization and of chemicals (REACH) etc. Because Sn58%Bi (in wt.%) solder alloy has low melting point and higher mechanical properties than that of Sn-Pb solder, it has been studied to manufacture electronic components. However, the reliability of Sn58%Bi solder could be lowered because of the brittleness of Bi element included in the solder alloy. Therefore, we observed the microstructures of Sn58%Bi composite solders with various contents of Sn-decorated multiwalled carbon nanotube (Sn-MWCNT) particles and evaluated bonding strength of the FR-4 components assembled with Sn58%Bi composite solder. Also, microstructures and bonding strengths of the Sn58%Bi composite solder joints were evaluated with the number of reflows from 1 to 7 times, respectively. Bonding strengths and fracture energies of the Sn58%Bi composite solder joints were measured by die shear test. Microstructures and fracture modes were observed with scanning electron microscope (SEM). Microstructures in the Sn58%Bi composite solder joints were finer than that of only Sn58%Bi solder joint. Bonding strength and fracture energy of Sn58%Bi composite solder including 0.1 wt.% of Sn-decorated MWCNT particles increased up to 20.4% and 15.4% at 5 times in reflow, respectively.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.5
• /
• pp.346-353
• /
• 2016

In the design conditions of some research reactors, the siphon phenomenon can cause continuous efflux of water during pipe rupture. A siphon breaker is a safety device that can prevent water efflux effectively. However, the analysis of the siphon breaking is complicated because many variables must be included in the calculation process. For this reason, a simulation program was developed with a user-friendly GUI to analyze the siphon breaking easily. The program was developed by MFC programming using Visual Studio 2012 in Windows 8. After saving the input parameters from a user, the program proceeds with three steps of calculation using fluid mechanics formulas. Bernoulli's equation is used to calculate the velocity, quantity, water level, undershooting, pressure, loss coefficient, and factors related to the two-phase flow. The Chisholm model is used to predict the results from a real-scale experiment. The simulation results are shown in a graph, through which a user can examine the total breaking situation. It is also possible to save all of the resulting data. The program allows a user to easily confirm the status of the siphon breaking and would be helpful in the design of siphon breakers.

• Journal of radiological science and technology
• /
• v.28 no.2
• /
• pp.111-115
• /
• 2005

The quality of image from the system that creates medical images by using X-ray depends on the various different reasons such as the X-ray generator, the subject and the image transmission medium. In other words, thereare various factors existing that can influence on the quality of image from the moment when the X-ray is generated and until the final image is created. Therefore, the operator who creates images at the clinical site should make continuous evaluation and observation from the final image. There are various methods of evaluating the medical images, but it is assumed that the MTF measurement method can be suitable for measuring actual or effective resolution. So in this study, the MTF measurement method by using X-ray film has been avoided and the MTF features according to the deterioration of the X-ray system have been measured by using the software (the program used Borland C++ builder software and LEAD tools software) that can measure the MTF of the digital medical images. As the result of this measurement, it has been found out through the MTF graph that the resolution and sharpness from the old x-ray generator with a many years of using and many numbers of times of using were deteriorated for the quality of image comparing to those from the new system. Also a simple and easy measurement method for the MTF from the digital medical images can be obtained in this study.

• Korean Journal of Soil Science and Fertilizer
• /
• v.39 no.1
• /
• pp.46-51
• /
• 2006

Phosphorus accumulation in fertilized soils becomes serious problem for agriculture and the environment. In this investigation, we conducted a laboratory scale investigation to find the most desirable displacement methods of the adsorbed phosphate onto the soil particle surfaces. Soil samples which contained high amount of phosphate were collected at two different depths (0-10 cm and 10-20 cm) from four locations at the moderate highland located in Nonsan, Chungnam. To observe the mobilization of solid-phase phosphate, soil samples were equilibrated with oxalic acid solutions ranging from $10^{-5}$ to $10^{-1}cmol\;L^{-1}$ with the dilution factors of 1:1, 1:2.5, 1:5, 1:10, and 1:20. The mineralized P sharply increased as the concentration of oxalic acid was greater than $5{\times}10^{-4}cmol\;L^{-1}$ under dilution factors of 1:1, 1:2.5, and 1:5. The breaking concentration of oxalic acid was lowered to $10^{-4}cmol\;L^{-1}$ and $5{\times}10^{-5}cmol\;L^{-1}$ for dilution factors of 1:10 and 1:20, respectively. The curve fit obtained from the graph can be described by exponential growth when the dilution factors were 1:1, 1:2.5, and 1:5 while the sigmoidal shape for 1:10 and 1:20, showing the mineralization of P were significantly dependent on the dilution factor.

• Journal of Biomedical Engineering Research
• /
• v.21 no.4
• /
• pp.333-338
• /
• 2000

In this paper, an automated segmentation algorithm is proposed for MR brain images using T1-weighted, T2-weighted, and PD images complementarily. The proposed segmentation algorithm is composed of 3 step. In the first step, cerebrum images are extracted by putting a cerebrum mask upon the three input images. In the second step, outstanding clusters that represent inner tissues of the cerebrum are chosen among 3-dimensional(3D) clusters. 3D clusters are determined by intersecting densely distributed parts of 2D histogram in the 3D space formed with three optimal scale images. Optimal scale image is made up of applying scale space filtering to each 2D histogram and searching graph structure. Optimal scale image best describes the shape of densely distributed parts of pixels in 2D histogram and searching graph structure. Optimal scale image best describes the shape of densely distributed parts of pixels in 2D histogram. In the final step, cerebrum images are segmented using FCM algorithm with its initial centroid value as the outstanding clusters centroid value. The proposed cluster's centroid accurately. And also can get better segmentation results from the proposed segmentation algorithm with multi spectral analysis than the method of single spectral analysis.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.8
• /
• pp.3628-3633
• /
• 2012

This paper proposes a model of the real time monitoring system based on Ubiquitous Sensor Network (USN) for the detection and prediction of landslides. For this purpose, the real time monitoring system with tilting sensor and USN was set up and the performance was conducted. The performance was accomplished by conducting both field examinations and the experimental evaluation of the monitoring system. The results of this study show that the angle $0^{\circ}$, $-10^{\circ}$, $-20^{\circ}$ and $0{\sim}-30^{\circ}$ of sensor position detected by the sensor module coincide with the data measured from USN monitoring system by giving a sampling time 100[msec]. Consequently, the proposed model of the real time monitoring system with tilting sensor based on USN will be widely used as a monitoring system in the exposure to dangerous landslide regions.

• Journal of KIISE:Computing Practices and Letters
• /
• v.15 no.4
• /
• pp.284-288
• /
• 2009

With explosively growing PPI databases, the computational approach for a prediction and configuration of PPI network has been a big stream in the bioinformatics area. Recent researches gradually consider physicochemical properties of proteins and support high resolution results with integration of experimental results. With regard to current research trend, it is very close future to complete a PPI network configuration of each organism. However, direct applying the PPI network to real field is complicated problem because PPI network is only a set of co-expressive proteins or gene products, and its network link means simple physical binding rather than in-depth knowledge of biological process. In this paper, we suggest a protein functional flow model which is a directed network based on a protein functions' relation of signaling transduction pathway. The vertex of the suggested model is a molecular function annotated by gene ontology, and the relations among the vertex are considered as edges. Thus, it is easy to trace a specific function's transition, and it can be a constraint to extract a meaningful sub-path from whole PPI network. To evaluate the model, 11 functional flow models of Homo sapiens were built from KEGG, and Cronbach's alpha values were measured (alpha=0.67). Among 1023 functional flows, 765 functional flows showed 0.6 or higher alpha values.

• Korean Journal of Remote Sensing
• /
• v.14 no.4
• /
• pp.366-375
• /
• 1998

Optical characteristics of the yellow sand and their influences on the ocean color remote sensing has been studied using ocean color sensor SeaWiFS measurements. Two cases of April 18 and April 25, 1998, representing yellow sand and background aerosol, are selected for emphasizing the impact of high aerosol concentration on the ocean color remote sensing. It was shown that NASA's standard atmospheric correction algorithm treats yellow sand area as either too high radiance or cloud area, in which ocean color information is not generated. Optical thickness of yellow sand arrived over the East Asian sea waters in April 18 indicates that there are two groups loaded with relatively homogeneous yellow sand, i.e.: heavy yellow sand area with optical thickness peak around 0.8 and mild area with about 0.4, which are consistent with ground observations. The movement of the yellow sand area obtained from surface weather maps and backward trajectory analysis manifest the notion that the weak yellow sand area was originated from the outer region of the dust storm. It is also noted that high optical thickness associated with the yellow sand is significantly different from what we may observe from background aerosol, which is about 0.2. These characteristics allow us to determine the yellow sand area with an aid of atmospheric correction parameter. Results indicate that the yellow sand area can be determined by applying the features revealed in scattergrams of atmospheric correction parameter and optical thickness.

• Korean Journal of Social Welfare Studies
• /
• v.49 no.2
• /
• pp.5-38
• /
• 2018

The purpose of this study is to examine work-life balance by analyzing time schedules of married couple. The 2014 Korea Time Use Survey dataset was used for the analysis. Finally, 6,262 time diaries of 3,131 households were included in the analysis. The study used sequence analysis in particular, by applying the Lesnard(2014)'s dynamic hamming matching (DHM) method, which is useful for the time diary analysis where timing is a key factor. This study explored daily schedules of each man and woman according to 9 types of couple-combined work-schedules, which had been already derived by cluster analysis. The daily schedules were identified according to the activities divided as labor, housework, sleep, self-management, active leisure, passive leisure, and others. Here, time allocation was analyzed through various graphs showing average time amount and modal states by time period. Based on the analysis, it summarized that "long working hours as a main factor of work-life imbalance", "gender inequality of time use", "non-standard hours work impairing quality of life and "poverty of leisure time"as characteristics of work-life imbalance. Finally this study discussed the social policy implications to support work-life balance.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2019.05a
• /
• pp.96-97
• /
• 2019

최근 홍수파 또는 댐 및 보 등의 하천구조물과, 본류와 지류의 합류로 인해 발생하는 배수영향 등으로 하천에 고리형 수위-유량관계가 나타나 수위-유량관계식의 신뢰도가 저하된다고 판단되는 대하천 본류와 합류부 인근 지류에서 초음파유속계 측정결과를 지표로 활용하는 자동유량장치가 현재 58개소에 도입되어 운용되고 있다. 그러나, 최근 4대강 사업으로 다기능보 설치 등 하천의 수리적 특성이 변동하였고, 지류에서 주로 운용되는 수위-유량관계 기반 유량관측소에 본류-지류합류로 인한 배수영향으로 고리형 수위-유량관계가 형성될 경우, 지류 수위관측소를 자동유량관측소로 대체할 필요성이 제기되고 있다. 또한, 기존 자동유량관측소의 경우 홍수량이 기준이하로 나타날 경우 수위-유량 관계식으로 대체하는 경우도 있는데 적용기준이 명확하지 않다. 본 연구에서는 신규 자동유량장치 설치, 기존 수위관측소의 자동유량관측소대체, 자동유량관측소에서 수위-유량관계곡선의 활용 기준 마련 등을 명확하게 판단하기 위해 고리형 수위-유량관계 패턴을 분석하고 배수영향구간을 산정하여 제시하고 지류 수위관측소의 존속여부, 유량자료의 적절성을 판단할 수 있는 방법론을 제시 하고자한다. 이를 위해, 다기능보 설치 및 지류-본류로 인한 지류하천의 배수영향과 홍수파에 의한 고리형 수위-유량관계의 양상을 다양한 수문사상에 대해 분석하였다. 분석방법으로는 대상유역을 선정하고, 대상유역에 대한 부정류 모형을 구축하기 위해 HEC-RAS 모형을 사용하고, 대상유역에 대한 HEC-RAS 지형자료와 유량입력자료를 구축한다. HEC-RAS 부정류 모형 구축 후 다양한 본류와 지류의 유량을 가정하여 고리형 수위-유량 발생 패턴을 분석한다. 지류-본류 합류 영향의 경우, 본류영향의 유무를 고려하여 상승된 수위의 비율로부터 일정 유의수준을 두어 배수영향구간을 산정한다. 다기능보의 영향은 다기능보 설치 전후를 가정하여 영향을 분석한다. 본 연구에서는 시범구역으로 하류에 창녕함안보가 위치한 낙동강과 합류하는 남강과 하류에 달성보가 위치한 낙동강과 합류하는 금호강을 대상하천으로 하여 위 분석방법을 적용하였다. 분석결과 남강의 경우 지류 유량이 작은 경우에도 본류 유량이 상대적으로 큰 경우 배수영향에 의한 고리형이 나타났고, 다기능보에 의한 배수영향은 매우 적은 것으로 나타났다. 또한, 지류의 유량이 큰 경우 홍수파에 의한 고리형 관계도 발생함을 알 수 있었다. 금호강의 경우 또한 마찬가지로 본류의 유량에 의해 발생하는 고려형 관계가 지배적임을 알 수 있었다. 따라서 이러한 결과를 바탕으로 95%의 유의 수준을 기반으로 고리형 발생 여부를 확일할 수 있는 모노그래프를 남강, 금호강에 대해 작성하여 수위-유량관계 기반 유량 산정의 적절성을 판단하는 기준으로 제안하였다.