• Journal of Sericultural and Entomological Science
• /
• v.29 no.1
• /
• pp.64-68
• /
• 1987

견에 대한 비닐단량체의 증량가공에 있어서 메타크릴아마이드(metacrylamide) 크라프트 가공견의 판별 방법을 확립하기 위하여 가공견에 대한 정성분석과 미세구조를 관찰한 결과 가공견의 용해성 및 실소함유량은 미가공견에 비하여 저하되었으며 IR-Spectra도 파장 1385cm-1, 1210cm-1에서 미가공견과 다른 흡수 peak를 보였고 가공견의 pyrogram은 메타크릴아마이드의 세분해로 미가공견에서는 나타나지 않은 또 다른 peak를 보였다. 또한 가공견의 표면미세구조는 미가공견에 비하여 fibril이 팽대하여져 거친 면을 보였다.

• Analytical Science and Technology
• /
• v.12 no.1
• /
• pp.7-12
• /
• 1999

The cation-exchange adsorbent (CEA) was prepared by radiation-induced grafting of glycidyl methacrylate (GMA) onto polypropylene (PP) fabric and its subsequently phosphonation. The adsorption characteristics of $Pb^{2+}$, $Cu^{2+}$ and $Co^{2+}$ for the CEA were discussed. In the grafting of GMA onto PP fabric, the degree of grafting (%) increased with increasing reaction time, reaction temperature, and pre-irradiation dose. The maximum grafting yield was observed around 60% GMA concentration. The content of phosphoric acid ranges from 2.5 to 3.5 mmol/g with the 85% phosphoric acid. The adsorption of $Pb^{2+}$, $Cu^{2+}$ and $Co^{2+}$ by the CEA was enhanced with increasing phosphoric acid content. The order of adsorption capacity of CEA was $Pb^{2+}$>$Co^{2+}$>$Cu^{2+}$.

• Composites Research
• /
• v.32 no.6
• /
• pp.335-341
• /
• 2019

In this study, an acrylic acid (AAc) was grafted on a polypropylene (PP) nonwoven fabric using electron beam irradiation. Electron beam grafting was carried out under various conditions to produce AAc grafted PP (PP-g-AAc) nonwoven fabric having a grafting yield of about 50% at radiation dose of 100 kGy and a monomer concentration of 60%. The physical and chemical properties of PP-g-AAc nonwoven fabric were evaluated by SEM, ATR-FTIR, thermal analysis and tensile strength. The morphology of PP and PP-g-AAc nonwoven fabric confirmed by SEM showed no significant change, and it was judged that AAc was introduced into PP nonwoven fabric from ATR-FTIR. PP-g-AAc nonwoven fabric showed an increase in tensile strength and a decrease in tensile strain compared to PP nonwoven fabric. However, since change of value is not significant, it is considered that there is no significant influence on the physical characterization. Adsorption experiments of PP-g-AAc nonwoven fabric on various ions showed selective adsorption behavior for lead ion. In conclusion, the electron beam radiation-induced PP-g-AAc nonwoven fabric is expected to be applied as an effective adsorbent for the adsorption of lead ions.

• Journal of Adhesion and Interface
• /
• v.12 no.2
• /
• pp.62-66
• /
• 2011

In this study, we synthesized a excellent adhesive chlorinated polyolefin (CPO)-g-$\beta$-carboxy ethyl acid ($\beta$-CEA) by radical polymerization. Also, we prepared low-level toxic primer for polypropylene (PP) using CPO-g-$\beta$-CEA and studied toxic and adhesion property. We identified the graft structure and properties of the prepared chlorinated polyolefin-g-$\beta$ CEA using FT-IR, DSC, UTM. Graft ratio were optimum value at 5 wt% $\beta$-CEA contents in CPO-g-$\beta$ CEA. And the primer for PP was prepared with CPO-g-$\beta$ CEA and adhesive builder PX-95 content. Finally, optimum peel strength obtained when PX-95 contents was 3 wt%.

• Applied Chemistry for Engineering
• /
• v.21 no.1
• /
• pp.34-39
• /
• 2010

Methacryloxypropyltrimethoxysilane (MPTMS) was used for the surface modification of silica nanoparticles in the toluene dispersion system for 8 h (MPSN). Then, methacryloxypropyl-modified silica nanoparticles were successfully prepared by solutioun polymerization in the ethanol solution at $60^{\circ}C$ for 14 h with adding AIBN initiator. The modification of ultra-fine particles (SiOx-PAA nanospheres) was investigated via EA, XPS, FTIR, TGA, SEM and TEM. The mean diameter of the bare silica nanoparticles, MPSN and SiOx-PAA monodisperse nanoparticles was about 25, 30 and 35 nm, respectively.

• Journal of Korea Foresty Energy
• /
• v.17 no.1
• /
• pp.30-35
• /
• 1998

The cellulose modification can be made in steps, giving a range of new products having properties quite different from the parent cellulose. Effective molecular weight control and narrow molecular weight distribution of the polyacrylonitrile can be accomplished by anionic polymerization technique. Preformed polyacrylonitrile was grafted precisely onto cellulose acetate by SN$_2$ reaction mechanism in a simple and effective way under homogeneous reaction condition. The 3.5g of completely dried cellulose acetate(DS=2.4) dissolved in 50ml of dry THF was transferred to the 215m1 polyacrylonitrile solution. The mixture was stirred vigorously under nitrogen atmosphere for 2 hrs. FTIR spectra of cellulose acetate and grafted cellulose acetate were taken, and their characteristic bands were identified.

• Polymer(Korea)
• /
• v.25 no.5
• /
• pp.642-648
• /
• 2001

An attempt was made to synthesize an ammonia adsorbent by the photo-induced grafting of styrene (St) onto polypropylene (PP) nonwoven using benzoin ethyl ether (BEE) as a photosensitizer with urea and trimethylol propane triacrylate in methanol medium. As styrene concentration was increased, the graft yield was increased. It was also found that the graft yield increased with reaction time. The polypropylene grafted with styrene (PP-g-St) was sulfonated by chlorosulfonic acid in dichloroethane and complexed with several metal ion, such as $cO^{+2}$, $nI^{+2}$, $cU^{+2}$, $Zn^{+2}$. The amount of ammonia gas adsorbed by these sample was dependent on the degree of sulfonation, adsorption time, and ammonia gas pressure. The adsorption capacity of ammonia gas by the sulfonated PP-g-St(SPP-g-St) nonwoven with 4. 25 mmol $H^+$/g was 6.61 mmol/g. Metal ion complexed SPP-g-St nonwovens had higher adsorption capacity than SPP-g-St nonwoven and the $Co^{+2}$ complexed SPP-g-St showed 9.90 mmol $NH_3$/g, which was much higher than that of active carbon or silica gel.

• Membrane Journal
• /
• v.19 no.4
• /
• pp.333-340
• /
• 2009

This paper is designed with the purpose of improving the efficiency of the sulfonic acid ion exchange membranes by radiation induced graft polymerization. It has been shown that the porous hollow fiber membranes could cause permeability blocking between pores and ion exchanged graft chains. Addition of crosslinker such as N-ethylene glycol dimethacrylate will permit to increase the permeation flux. In this research, the ethylene glycol dimethacrylate (EDMA) and diethylene glycol dimethacrylate (DDMA) with different length are used as crosslinkers. The ion exchanged cross-linked membrane (EDMA, DDMA) containing sulfonic acid group by radiation induced grafted polymerization are sn died for adsorb metal ions (Pb). It has been shown that adsorbed metal ions ($Pb^{2+}$) for the EDMA and DDMA membranes with the density of sulfonic acid groups, 1.40 mmol/g and 2.14 mmol/g, respectively are 13.82 mg/g, 17.37 mg/g, accordingly.

• Journal of Adhesion and Interface
• /
• v.11 no.3
• /
• pp.89-99
• /
• 2010

In this paper, for polymerization of poly(vinyl acetate-co-ethylene) (VAE) by redox system using poly(vinyl alcohol) (PVOH) as emulsifier on the properties of the final emulsion, and pH changes affect the physical properties of the final emulsion was investigated. The results of the molecular weight of PVOH had a dramatic impact on the emulsion properties. The used a low molecular weight of PVOH products was obtained low viscosity and using the high molecular weight of PVOH were obtained high viscosity product. However, changing the pH of the final polymerized product properties for the PVOH obtained different results. Generally, a poly(vinyl acetate) emulsion by a high degree of polymerization and high molecular weight of PVOH was obtained high viscosity of the final emulsion. But, in VAE was lower emulsion viscosity in high pH. This is the molecular weight of the emulsion during the synthesis of PVOH is considered to be affected by degradation. The final viscosity was decreased by grafting ratio and molecular weight were decreased with increasing of pH.

• Applied Chemistry for Engineering
• /
• v.18 no.1
• /
• pp.10-16
• /
• 2007

In this study, we examined the preparation and hydrolysis property of immobilized urease membrane to decompose harmful urea in the body and remove ammonia which was produced by its decomposition. Urease immobilized membrane was prepared by introducing anion-exchange group DEA into porous hollow-fiber membrane by radiation graft polymerization method, and immobilization of urease. When urease was immobilized at membrane introduced with anion-exchange group, the more increasing grafting rate, the more increasing immobilization amount. The result originates from the fact that a greater amount of protein was immobilized by forming a multilayer on the longer grafted chain. Meanwhile, the addition of the cross-linker was possible not only to suppress separation phenomenon produced during a washing process of immobilized urease membrane but also to enable the recycling of membrane. Urease Immobilized membrane with no separation phenomenon was prepared by cross-linking reaction for 5 h, and the hydrolysis rate of prepared urease immobilized membrane was over 98% and 50%, respectively, in 1 mol and 4 mol urea solutions.