• Journal of the Korea Concrete Institute
• /
• v.23 no.2
• /
• pp.203-209
• /
• 2011

The cement industry is expected to face a major set-back in the near future due to its large energy consumption and $CO_2$ production, causing global warming. In order to overcome these environmental problems, this research has bee carried out to find a cement substitute material. One possible cement substitute material is Zeolite cement. In this study, the materialistic characteristics of Zeolite cement mortar were evaluated. Natural Zeolite cement mortar was prepared using alkali activation (NaOH) instead of water ($H_2O$) to determine achievable strength and appropriate mixing ratio. Based on the mixing ratio, functional material was added to alkali active agent to harden Zeolite mortar to develop a highly functional construction material. The study result showed that pure Zeolite cement mortar achieved compressive strength of 42 MPa in 7 days depending on the mixing amount of alkaline catalyst and the hardening temperature, showing high efficiency and possibility as a new construction material.

• Journal of the Korean Chemical Society
• /
• v.43 no.2
• /
• pp.172-181
• /
• 1999

To develop the manufacturing technique for the powder builder of amorphous solid types, the water glass mixed with caustic soda dispersed into the methanol. Thus soluble sodium silicate was made a form of amorphous solid powder. In order to examine characteristics of water soluble sodium silicate $SiO_2/Na_2O$ mol ratio, we investigated solubility, thermogram, SEM, and BET analysis. pH buffering capacity, calcium-ion binding capacity as temperature change, and surfactant loading capacity were examined for characteristics as laundry detergent builder. $SiO_2/Na_2O$ molar ratio of soluble sodium silicate was 1.0, 2.4, 2.8, and zeolite was used in order to investigate basic characteristics of laundry detergent builder. Silicate used with laundry detergent was good for pH buffering capacity and solubility. But calcium-ion binding capacity and surfactant adsorption ability were lower. $SiO_2/Na_2O$ mol ratio became higher, pH buffering capacity and ion exchange ability were lower and surfactant adsorption ability was a little higher.

• The Journal of the Petrological Society of Korea
• /
• v.8 no.2
• /
• pp.81-91
• /
• 1999

The area of the study is located in Ogcheon district, middle part of Ogcheon Fold Belt. The area is covered by metasedimentary rocks of Ogcheon Supergroup at northern, eastern and southern part. Jurassic Ogcheon granite which intruded into Ogcheon Supergroup at central part, was intruded by Cretaceous quartz porphyry at western part. The granite consists of quartz, plagioclase, alkali feldspar, biotite, sphene, apatite, epidote, opaque and so on. It is generally characterized by grey to light grey, medium-grained, mafic enclave and partly weak foliation. In terms of geochmical compositions, the granite is felsic, peraluminous, subalkaline and calc-alkaline, and it was differentiated from single granitic magma. It shows parallel LREE enrichment and HREE depletion patterns with 0.84 Eu negative anomaly, which has REE variation trend and anomaly value similar to Jurassic granites in Korea. From charactristics of petrology, mineralogy and geochmistry, it may be interpreted that the Ogcheon granite body was derived from melting of I-type crustal material related to syn-collisional tectonic setting and emplaced more or less rapidly into the Ogcheon Supergroup.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.14 no.6
• /
• pp.1375-1381
• /
• 2010

LED(Light Emitting Diode) is an emitting device which energy is same to the bandgap energy of p-type and n-type semiconductor junction. Recently high brightness LED is used in fish-luring light and traffic signal light alternative of normal light bulb, and widely used in the area of display pannel. Moreover nowadays LED has been used as a back light of LCD display. Recently, visible light communication(VLC) using LED, that allow two-way serial data communication between LEDs over a distance of sveral centimeters or meters, has been widely studied in the area of digital information transmission along with illumination and display. In this paper, we present LED communication system and their applications.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.1 no.2
• /
• pp.23-33
• /
• 1991

Mn - Zn Ferrite has the natural characteristics of incongruent melting and the zinc oxide evaporation while the crystal is being grown. As a result of these, it comes into existence to be a non-uniform distribution of cations along the crystal growth axis and also Pt particles are usually precipitated into the crystals in Bridgman method since the melt zone is maintained for a long time in the crucible. These have bad effects on the magnetic properties of ferrites. But, to overcome these faults and then acquire the better single crystals. new modified growth method was developed and the growth factors were investigated as following: melt height in the crucible, surface tension and density of melt, the behavior of melt at interface, the shapes of crucible and solid -liquid interface, powder feeding rate, and the crystal growing speed. In additon, when we analyzed the compositional fluctuations of grown crystals, they were supressed within 1.5 mol% $Fe_20_3$, 2 mol% MnO, ZnO respectively with comparing to initial composition of crystal and the microstructures of crystals on the(110) plane were observed by optical microscope through the chemical etching technique and the magnetic properties were determined.

• Korean Journal of Environmental Agriculture
• /
• v.16 no.4
• /
• pp.327-332
• /
• 1997

This study was conducted to find out the effect for removal of $NH_3$ gas, one of the offensive odor. The removal efficiencies of $NH_3$ gas through zeolie column increased with the decreased percolation velocity. The effect of zeolite colum in removing $NH_3$ gas was influenced by the water content of zeolite and the added amount of zeolite, but was not influenced by the setting method of zeolite. The $NH_3$ gas removing sequence of saturated cation species on zeolite was in order of Ca->Na->$NH_4$ ->Natural->K-zeolite. Consequently the effect of zeolite on $NH_3$ gas removal efficiency is consided by the water content, added amount and saturated cation of the zeolite.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2010.05a
• /
• pp.226-229
• /
• 2010

LED(Light Emitting Diode) is an emitting device which energy is same to the bandgap of p-type and n-type semiconductor junction. Recently high brightness LED is used in fish-luring light and traffic signal light alternative of normal light bulb, and widely used in the area of display pannel. Moreover nowadays LED has been used as a back light of LCD display. Recently, visible light communication(VLC) using LED, that allow two-way serial data communication between LEDs over a distance of sveral centimeters or meters, has been widely studied in the area of digital information transmission along with illumination and display. In this paper, we present LED communication system and their applications.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.02a
• /
• pp.422-422
• /
• 2010

유기 발광 소자는 전색 디스플레이, 액정디스플레이의 백라이트유닛 및 조명으로의 사용가능성 때문에 많은 관심을 받아 왔고 지속적으로 발전하여 디스플레이 뿐 아니라 조명 시장에서 관심을 갖게 되었다. 그러나 유기 발광 소자의 효율은 무기 발광 소자의 효율보다 낮고 제작하는 데 고비용을 요하기 때문에 조명시장으로의 원활한 진입을 위해서는 지속적인 연구가 필요적이다. 발광층에 삼원색을 혼합하여 백색 유기 발광 소자를 제작하는 방법은 그 제조 공정이 복잡하고 공정 단가가 크게 상승할 우려가 있고 발광 물질의 수명을 동시에 고려해주어야 하는 문제점이 있다. 이 문제를 해결하기 위하여 청색 유기 발광 소자를 제작하고 색변환층으로 적색 형광체를 사용하면 그 단순한 구조에 기인한 간단한 공정으로 인해 가격과 소자성능의 안정성을 가지는 장점을 가질 수 있다. 색변환층의 두께를 통해 유기 발광 소자의 발광 스펙트럼을 아주 용이하게 조절할 수 있어 높은 연색지수를 갖는 백색 발광 유기 소자의 제작이 가능하여 조명으로의 적용 가능성이 아주 크다. 이를 바탕으로 높은 휘도를 갖는 청색 유기 발광 소자의 유리 기판 반대편에 적색 형광체층을 두께별로 도포하여 백색 유기 발광 소자를 제작하였다. 색변환층으로 사용될 적색 형광체는 $CaAl_{12}O_{19}:Mn^{4+}$ 화합물로써 졸-겔 방법을 사용하여 제작하였다. 제작한 $CaAl_{12}O_{19}:Mn^{4+}$ 화합물에 대한 X 선 회절 패턴은 형성된 형광체의 구조임을 알 수 있었다. 각기 다른 형광체의 도포 조건에 따른 구조적 성질과 색변환 효율의 변화를 알아보기 위해 주사전자 현미경 측정으로 확인하였다. 제작된 적색 형광체와 청색 유기 발광 소자는 광루미네센스 스펙트럼과 전계 발광루미네센스 스펙트럼 결과를 사용하여 발광 메커니즘을 분석하였다.

• Applied Chemistry for Engineering
• /
• v.25 no.3
• /
• pp.286-291
• /
• 2014

In this study, nanosized TPA-silicalite-1 was synthesized with a suitable molar composition of TPAOH: $SiO_2$: $H_2O$ for the development of zeolite ceramic membranes to utilize as gas separation. As silica sources, TEOS, LUDOX AS-40 and CAB-O-SIL were used with the starting material of TPAOH. $NaH_2PO_4$, and a variety of acids and bases were used as promoters after TPAOH, $SiO_2$, $H_2O$ gel synthesis. To decrease synthesis time, a two step temperature change method was applied to the synthesis of TPA-silicalite-1 at a low temperature. TPA-silicalite-1 synthesized was analyzed with XRD, SEM, BET and TGA. As a result, TPA-silicalite-1 powders with a particle size of 100 nm and a specific surface area of $416m^2/g$ were obtained as optimum synthesis conditions when the two stage temperature change method was used with $NaH_2PO_4$ as promoter.

• Korean Journal of Soil Science and Fertilizer
• /
• v.32 no.4
• /
• pp.421-428
• /
• 1999

Potassium (K) released from weathering of biotite in soils has been recognized as one of major K-sources for plant growth. Sand size biotite in a soil-saprolite-parent rock profile developed under temperate climate was studied in terms of morphological, mineralogical, and chemical changes according to depth employing petrographic and electron microscopes. X-ray diffraction, and electron microprobe. Biotite showed discoloring from black to goldish white and loss paleochroism with decreasing depth. Both edge and layer weatherings of biotite showed in this study. Hexagonal holes and cracks on (001) plane of weathered biotite grains were observed and their members increased with increasing weathering degree. Biotite was altered to kaolinite with or without intermidiate products such as hydrobiotite, degraded biotite, and illite. Average chemical composition of weathered biotite changed to that of katolinite with decreasing depth: increasing concentrations of silicon (Si) and aluminum (Al) and decreasing concentrations of potassium (K), iron (Fe), magnesium (Mg), manganese (Mn), and taitanium (Ti).