• Communications for Statistical Applications and Methods
• /
• v.3 no.2
• /
• pp.93-102
• /
• 1996

혼합물 실험에서 실험의 조건이 균질하지 않은 경우, 블럭화를 주로 행한다. 이런 블럭화가 이루어 질때 추정반응값 분산그림을 이용하여 각 구성성분에 제약이 없는 경우와 제약이 있는 경우 각각에 대하여 블럭화가 실험계획의 추정반응값 분산에 어떤 영향을 미치는지 알 수 있는 그래픽 방법을 제안하였다. 이 방법을 통하 여 혼합물 실험에서 블럭화의 효과를 각 구성 성분에 대하여 알아볼 수 있다. 또한, 어떤 블럭화가 추정반응값 분산의 증가를 최소화할 수 있는 지를 그림을 이용하여 비교, 검토할 수 있게 된다.

• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 2001.09a
• /
• pp.176-179
• /
• 2001

비 수용성 유기오염물(NAPL; non-aqueous phase liquid)로 오염된 불균질 토양을 계면활 성제를 이용하여 정화할 경우 효율성을 알아보기 위해 칼럼 및 박스 실험을 실시하였다. 불 균질한 지하 내부구조는 정화효과에 커다란 영향을 끼치는 것으로 알려져 있으나 이에 대한 연구는 매우 미비한 형편이다. 2차원 불균질 분포를 잘 나타내주는 박스실험을 통하여 실제 지하매질에 가까운 조건에서 실험을 실시하였다. PCE(tetrachloroethylene)와 xylene이 NAPL로 올리에마이드(01eamide)가 비이온-계면활성제로 이용되었으며, 1%용액과 증류수를 주입하여 NAPL을 세정하였고 가스크로마토그래피를 이용하여 NAPL의 농도를 분석하였다. 계면활성제를 주입할 경우가 증류수를 주입할 때보다 최대유출농도가 약 200배 정도가 높게 나타났으며 빠른 시간 내에 대부분의 NAPL이 정화되었다. 본 실험을 통하여, 불균질 매질에서의 계면활성제를 이용한 토양세정방법의 효율성이 정량화 되었으며, 계면활성제를 이용한 채수주입법의 현장 적용가능성을 확인하였다.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.21 no.2
• /
• pp.151-156
• /
• 1985

In this paper, the plane stress fracture toughness of cold rolled 4.5mm thick SS41 steel plate was investigated for various crack ratios respectively in case of base metal, normalized and annealed heat-treated specimens using the method of J-integral. The specimen geometry used was double edge tension (DET) specimen. The experiments were performed on an Instron machine and all the crack lengths were measured by travelling microscope. The plane stress fracture toughness obtained by the method of Rice equation was J sub(1C)=22.8kgf/mm for the base metal, j sub(1C)-24.7kgf/mm for the normalized specimen and J sub(1C)=26.9 kgf/mm for the annealed. The J-integral computed at the limit load was found unsuitable for fracture toughness determination, because of large variation depending on the crack ratio.

• Journal of Korea Water Resources Association
• /
• v.30 no.6
• /
• pp.699-708
• /
• 1997

The effective unsaturated hydraulic conductivity in stratified soils is evaluated using a three-dimensional stochastic approach. Because of the disparity of the correlation scales in a stratified soil, the general stochastic equations are simplified. This allows analytical evaluation of generic expressions for the effective hydraulic conductivities. Simple asymptotic expressions, valid at particular ranges(wetting front, drying condition, wetting condition) of the mean flow characteristics, are also derived. An example of applying the derived theoretical result to a imaginaryl clay soil is presented. It reveals found that the effective unsaturated hydraulic conductivity showed large-scale hysteresis. Such large-scale hysteresis was produced by the spatial variability of hydraulic soil properties rather than hysteresis of the local parameters. In addition the results show that the effective hydraulic conductivities were larger in the case of accommodating heterogeneity of soil preperties rather than neglecting heterogeneity of soil properties.

• Composites Research
• /
• v.33 no.2
• /
• pp.81-89
• /
• 2020

In this review paper, we introduce recent research studied effective physical properties of the reinforced composite using mean-field homogenization. We address homogenization for effective stiffness and expand it to effective thermal/electrical conductivity and dielectric constant. Multiphysics problems like piezoelectricity and thermoelectricity are considered by simplifying the constitutive equation into the linear equations like Hooke's law. We present a generalized theoretical formula for predicting effective physical properties of composite and validation by against finite element analysis.

• Korean Journal of Plant Resources
• /
• v.19 no.2
• /
• pp.265-272
• /
• 2006

This study was conducted to investigate the efficient propagation method of Cyrtomium caryoptideum var. coreanum by sporophyte culture. The influence of origin of explant sources (rhizome, blade, or stipe) and homogenization of culture materials on shoot regeneration were investigated. As a result, only rhizome explant exhibited the organogenic capacity and the shoot regeneration was promoted by homogenization of culture material. Vigorous and excellent growth of multiple shoots was induced on the half-strength of inorganic salts containing MS medium. It was appeared that optimum nitrogen content of shoot regeneration was half-strength of nitrogen containing MS medium (30mM) and optimum sucrose concentration was 1%. Addition of $NaH_2PO_4$ to culture medium generally enhanced shoot multiplication and promoted growth of the regenerants. The organogenic capacity of homogenized rhizomes was especially promoted on medium supplemented with $5{\mu}M$ kinetin plus $5{\mu}M$ IBA. The incorporation of $0.1\sim0.2%$ activated charcoal on medium supplemented with growth regulators prevented the formation of multiple bud primordia - nodule-like bud clusters and improved the normal morphogenesis of sporophytes.

• Journal of the Korean Geotechnical Society
• /
• v.17 no.4
• /
• pp.183-190
• /
• 2001

굴패각을 혼합한 해성점토를 매립재료로 활용하기 위한 기초 자료를 얻기 위해, 혼합토의 전단.변형특성을 검토했다. 또한 삼축압축실험과 균질화이론을 근거로 한 수치해석에 의해 혼합재(굴패각)의 겉보기 탄성계수를 구하기 위한 방법을 제안했다. 일련의 실험결과로부터, 굴패각의 혼합에 의해 점토의 전단.변형특성이 개선됨을 확인했고, 굴패각의 겉보기 탄성계수를 구하기 위해 미시구조를 검토할 수 있는 균질화법을 도입했다. 굴패각의 겉보기 탄성계수는 굴패각의 골격구조의 변화에 기인해 변화하고 선행압밀응력이 작은 경우에 그 영향이 크게 나타나는 것을 알 수 있었다.

• Journal of Soil and Groundwater Environment
• /
• v.6 no.4
• /
• pp.51-59
• /
• 2001

Column and box tests were performed to investigate the removal efficiency of NAPL using the surfactant enhanced flushing In heterogeneous medium. Homogeneous Ottawa sand and heterogeneous soil were used to verify the increase of remediation efficiency for the surfactant enhanced flushing in column test. Box tests with two different heterogeneous sub-structure were performed to quantify the capability of the surfactant enhanced flushing as a remediation method to remove NAPL from the heterogeneous medium. Two different grain size sand layers were repeated in the box to simulate the heterogeneous layer formation and the modified fault structure was built to simulate the fault system in the box. O-xylene as a LNAPL and PCE as a DNAPL were used and oleamide as a non-ionic surfactant. The maximum NAPL effluent concentration with 1% oleamide flushing in the homogeneous column test increased about 460 times compared to that with only water flushing and about 250 times increased in the real soil column test. In heterogeneous medium, the maximum effluent concentration increased about 150 times in 1% oleamide flushing and most of NAPL were removed from the box within 8 pore volume flushing, suggesting that the removal efficiency increased very much compared to in only water flushing. Results investigated the capability of the surfactant enhanced remediation method to remove NAPL even in heterogeneous medium.

• Proceedings of the Korea Institute of Convergence Signal Processing
• /
• 2000.12a
• /
• pp.217-220
• /
• 2000

현재, 선박용 로프제조에서 로프의 제조 공정은 수작업에 의해 행해지고 있어 작업의 효율화와 품질의 균질화를 위해서 최적의 장력제어가 필요하다. 본 연구의 목적은 와이어 로프 제조공정의 자동화이고 로프의 제조 공정에서 장치는 로프를 릴에 감아 올릴 필요성은 거의 없기 때문에 케이블을 풀어주는 속도와 로드셀에 의해 장력을 검출하고 장력을 발생하는 하드웨어 구성방법을 연구하는 것이다. 본 연구는 현수형 와이어 로프(Catenary Rope)의 동적 모델링을 작성한다. 이 시스템에 대하여 교류서보 전동기를 이용한 장력 발생장치를 모델링한다. 현수형 시스템의 장력 계측 장치는 하중 변환기(load cell)를 사용하고 수학적 모델링을 행한다. 장력 계측 장치에 관해서 스프링 저울을 이용해 출력을 비교 검토한 결과, 인장력을 계측하는 장치로서의 유효성을 확인하였다.

• Food Science of Animal Resources
• /
• v.32 no.2
• /
• pp.220-227
• /
• 2012

The objective of this study was to investigate the influence of emulsion processing with various homogenization treatments on the physical properties of nanoparticles. For the manufacturing of nanoparticles, by taking the emulsion-diffusion method, various coating materials, such as gum arabic, hydroxyethyl starch, polycarprolactone, paraffin wax, ${\kappa}$-carrageenan and emulsifiers like Tween$^{(R)}$60, Tween$^{(R)}$80, monoglyceride and Pluronic$^{(R)}$F68, were added into the emulsion system. Furthermore, the various speeds (7,000 rpm to 10,000 rpm), and times (15 s to 60 s) of homogenization were treated during the emulsion- diffusion process. NEO II homomixer was the most effective homogenizer for making nanoparticles as 51 nm ($D_{10}$) and 26 nm ($D_{50}$). To manufacture smaller nanoparticles, by using NEO II homomixer, 10,000 rpm of agitation speed, polycaprolactone as coating material, and Pluronic$^{(R)}$F68 as an emulsifier were the optimum operating conditions and components. For the stability of nanoparticles for 7 days, $20^{\circ}C$ of storage temperature was appropriate to maintain the particle size. From these results, the type of homogenizer, homogenization speed, homogenization time and storage temperature could affect the particle size. Moreover, type of coating materials and emulsifier also influenced the size and stability of the nanoparticles.