• Composites Research
• /
• v.33 no.2
• /
• pp.81-89
• /
• 2020

In this review paper, we introduce recent research studied effective physical properties of the reinforced composite using mean-field homogenization. We address homogenization for effective stiffness and expand it to effective thermal/electrical conductivity and dielectric constant. Multiphysics problems like piezoelectricity and thermoelectricity are considered by simplifying the constitutive equation into the linear equations like Hooke's law. We present a generalized theoretical formula for predicting effective physical properties of composite and validation by against finite element analysis.

• Proceedings of the Acoustical Society of Korea Conference
• /
• autumn
• /
• pp.89-92
• /
• 2000

고주파 대역의 소오나를 이용하여 해저면 상태, 즉 해저면 거칠기 및 비균질성의 변화에 따른 음파 산란 영향을 파악하기 위한 실험을 실시하였다. 지음향 요소 중, 평균 입도 크기(mean grain size)는 입도 분석을 통하여 결정하였으며, 이를 기초로 하여 나머지 요소들(Density, Velocity Ratio 등)을 결정하였다. 또한 공극률을 측정하여 평균 입도 크기와 비교함으로써, 공극률과 입자 크기 사이의 관계를 나타내보고자 하였다. 이렇게 파악된 해저면 특성들과 해저면에 의해 산란되어 들어오는 신호의 분석을 통하여 해저면의 상태에 따른 신호의 변화를 비교하였다. 획득된 자료들은 해저면의 상태, 즉 해저면 연흔(ripple)의 유무와 해저면내의 비균질성에 따라 수신되는 신호에 차이를 나타내었으며, 또한 입사각, 산란 각 및 방위각의 변화에 따라 신호에 차이를 보였다. 수신된 신호들간의 비교를 통하여 해저면내의 비균질성의 차이에 따른 산란 음파의 변화 양상을 파악하고자 하였다.

• Journal of the Korea Concrete Institute
• /
• v.18 no.2 s.92
• /
• pp.189-198
• /
• 2006

The composition of most engineering materials is heterogeneous at some degree. It is simply a question of scale at which the level of heterogeneity becomes apparent. In the case of cementitious granular materials such as concrete the heterogeneity appears at the mesoscale where it is comprised of aggregate particles, a hardened cement paste and voids. Since it is difficult to consider each separate particle in the topological description explicitly, numerical models of the meso-structure are normally confined to two-phase matrix particle composites in which only the larger inclusions are accounted for. 2-D and 3-D concrete blocks(Representative Volume Element, RVE) are used to simulating heterogeneous concrete meso-structures in the form of aggregates in the hardened mortar with nearly zero-thickness linear or planar interfaces. The numerical sensitivity of these meso-structures are Investigated with respect to the different morphologies of heterogeneity and the different level of coupling constant among fracture mode I, II and III. In addition, a numerically homogenized concrete block in 3-D using Hashin-Shtrikman variational bounds provides an evidence of the effective cracking paths which are quite different with those of heterogenous concrete block. However, their average force-displacement relationship show a pretty close match each other.

• Tunnel and Underground Space
• /
• v.13 no.3
• /
• pp.180-186
• /
• 2003

The fracture processes under dynamic loading in tension were simulated using a proposed numerical approach and analyzed to determine dynamic tensile strength. The dynamic tensile strength and the scatter of the strength data decreased with increasing uniformity coefficients. The differences of static and dynamic tensile strength were due to the stress concentrations and redistribution mechanisms in the rock specimen. Although there were different mechanisms for the static and dynamic fracture processes, the static and dynamic tensile strengths were close to the mean microscopic tensile strength at high values of the uniformity coefficient. This paper shows that the rock inhomogeneity has an effect on dynamic tensile strength and is a factor that contributes to the different specimen strengths under dynamic and static loading conditions.

• Korean Journal of Cognitive Science
• /
• v.15 no.2
• /
• pp.17-22
• /
• 2004

Two experiments were executed to investigate the effect of uniform connectedness systematically using the identification task of briefly exposed forms. Previous study observed negative repetition effected (i.e., NRE) in the identification task of two parentheses either connected or disconnected vertically, which was interpreted as an evidence against the hypothesis of uniform connectedness. Experiment I tested the hypothesis that NRE resulted from the Perceptual set or anticipating disconnected displays. Experiment 2 tested the hypothesis that NRE resulted from relatively shorter exposure time. Using partial report task asking participants to report only the cued target and whole report task asking them to report the whole pattern with only connected displays, experiment 1 observed NRE respectively. Experiment 2, with longer exposure time equivalent to 83% accuracy and response bias controlled by use of catch trials, obtained the same NRE. Those results seems to indicate that uniformly connected forms were processed analytically by perceivers without task demand and futhermore, the hypothesis of uniform connectedness as a principle of perceptual organization is not plausible.

• Journal of Korean Society of Steel Construction
• /
• v.28 no.3
• /
• pp.173-183
• /
• 2016

Various material characteristics of HSA800 steel were examined and a quantitative criteria about the homogeneity of the strength was proposed. Whether HSA800 steel is satisfied the criteria for homogeneity of the strength or not was also examined. From the test results, the material characteristics of 1/4 point from the extreme fiber in the Z-direction satisfied the KS requirements. The excellent directional properties and impact resistance at low temperatures were also showed from the test results. HSA800 steel satisfied the criteria of homogeneity for the strength of the steel. However, it showed that some structures were banded together at 2/4 point from extreme fiber in the Z-direction from the microscopic tests and attention is needed to be paid in that point.

• Journal of the Korean Geotechnical Society
• /
• v.16 no.4
• /
• pp.5-16
• /
• 2000

THe purpose of this paper is to suggest the analytical method which can predict lateral nonlinear behavior in non-homogeneous soil using the coefficient of soil resistance and ultimate soil resistance. Those parameters are obtained through back analysis on the base of the results of a series of model tests.Analytical method of Chang is more or less difficult to predict nonlinear behavior in non-homogeneous sol. So, in this study, for the prediction of nonlinear behavior the compositive analytical method which apply the p - y curve to Chang model is suggested. Also, the program is developed to predict nonlinear behavior using the compositive analytical method and it can be used to calculated the deflection, bending moment and soil reaction with DFM in non-homogeneous soil. To establish applicability of the suggested analytical method, the results of model tests and field tests and Pentagon2D finite element program are compared with those of the compositive analytical method. In the analysis values of the coefficient of soil reaction and ultimate soil resistance are also applied to the case of non-homogeneous soil. Lateral defection calculated using the compositive analytical method has been found to be in good agreement with values measured in field and model load tests.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.49 no.3
• /
• pp.37-46
• /
• 2012

In RADAR and SONAR detection systems, noise environment can be classified into homogeneous and heterogeneous environment. Especially heterogeneous environments are modelled as target masking and clutter edge. Since the variability-index (VI) CFAR, a composed CFAR algorithm, dynamically selects one of the mean-level algorithms based on the VI and the MR (mean ratio) test, it is robust to various environments. However, the VI CFAR still suffers from lowered detection probabilities in heterogeneous environments. To overcome these problems, we propose an improved VI CFAR processor where TM (trimmed mean) CFAR and a sub-windowing technique are introduced to minimize the degradation of the detection probabilities appeared in heterogeneous environments. Computer simulation results show that the proposed method has the better performance in terms of detection probability and false alarm probability compared to the VI CFAR and single CFAR algorithms.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.38 no.8
• /
• pp.849-855
• /
• 2014

The GFRP composite is used for hot press flow molding of automotive components, and the different flow rates of fiber and plastic are likely to induce fiber orientation and inhomogeneity in the material. However, very limited systematic research studies are available on composite materials with superior flow homogeneity and optimized fiber orientation. The inhomogeneity and fiber orientation issues of GFRP composites have still not been resolved through research. The plain weaving method applied to the GFRP prepreg can improve its recyclability, inhomogeneity, fiber flow, structural stability, fiber deformation, surface smoothness, degree of impregnation, and other mechanical properties. The need for more detailed and thorough studies is evidenced.

• Journal of Korea Foundry Society
• /
• v.43 no.6
• /
• pp.286-293
• /
• 2023

In this study, we investigated the microstructural evolution of Al-Mg-Zn aluminum alloy billet during homogenization treatment using OM, SEM, EDS and DSC. There were numerous phases found, such as; AlMgZn, AlMgFe, and AlMgZnSi phases, in the grain of the cast billet. After 6 hours homogenization treatment, Zn was mostly dissolved, whereas, Mg and Si were only partly dissolved. Accordingly, only AlMgFe and AlMgSi remained. After 18 hours, all of the leftover Mg and Si were dissolved, leaving only AlMgFe, which was also found after 24 hours. The results of the alloy design program, JMatPro showed that Mg dissloved more rapidly than Zn. According to the homogenization kinetic equation, Mg and Zn are completely dissolved within 1.9 and 3.5 hours, respectively.