• The Magazine of the Society of Air-Conditioning and Refrigerating Engineers of Korea
• /
• v.6 no.2
• /
• pp.87-90
• /
• 1977

핀(fin) 재료의 열전도계수는 온도에 따라 직선적으로 변한다고 가정하여 일차적, 정상상태의 해석을 하였다. 정밀해는 타원적분의 함수로 표시된다. 핀(fin) 효율은 핀끝의 온도의 함수로 주어졌다. 계산을 용이하게 하기 위하여 perturbation해도 구하였다.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.20 no.3
• /
• pp.185-190
• /
• 1987

In order to study the preservation effect of $-3^{\circ}C$ partial freezing method, tile growth and biochemical activity of microorganisms and the changes of K-value in mackerel press juice were investigated at $0^{\circ}C,\;-3^{\circ}C$ supercooling (liquid phase) and $-3^{\circ}C$ freezing (solid phase). The results obtained in this paper were follows : 1) The growth and biochemical activity of microorganisms were reduced at $-3^{\circ}C$ supercooling than $0^{\circ}C$ in spite of the small variation in temperature. 2) There were no growth and biochemical activity of microorganisms at $-3^{\circ}C$ freezing (solid phase). 3) The difference in the K-value between $-3^{\circ}C$ supercooling and $-3^{\circ}C$ freezing was remarkable in spite of the same temperature.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.26 no.4
• /
• pp.556-562
• /
• 1997

Depletion of nitrite by lactic acid bacteria isolated from Kimchi and the effects of pH and temperature on depletion of nitrite in Lactobacillus MRS broth were investigated. Depletion of nitrite by Lactobacillus plantarum and Lactobacillus sake was low in initial stage of growth but increased during growth at 15 and 2$0^{\circ}C$. L. plantarum and L. sake depleted than 90 and 75% of nitrite(250$\mu\textrm{g}$/$m\ell$) in 1 day of growth at 25 and 3$0^{\circ}C$, respectively, but depleted almost all of nitrite in 2 days. While the effect of Leuconostoc mesenteroides (150$\mu\textrm{g}$/$m\ell$) was lower compared to Lactobacillus(250$\mu\textrm{g}$/$m\ell$). In addition, even high concentrations(600 and 900 $\mu\textrm{g}$/$m\ell$) of nitrite was depleted at 2 days of growth by L. plantarum. pH of growing broth decreased as the increase of growth time and temperature, and depletion of nitrite in- creased as the decrease of pH of growing culture. However, pH of broth related with the decrease of depletion of nitrite at 25 and 3$0^{\circ}C$, but not at 15 and 2$0^{\circ}C$. Therefore, depletion of nitrite was greatly affected by growth temperature rather than by pH.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2003.03a
• /
• pp.105-105
• /
• 2003

InGaN/GaN MQW 구조는 청색 및 녹색 범위의 밴드 갭을 가지는 반도체로 최근 LED 및 LD 제조 등에 이용되고 있다. InGaN/GaN MQW은 InGaN와 GaN의 최적 성장온도의 중간온도에서 실행된다. InGaN와 GaN는 최적 성장온도의 차이가 크므로 중간온도에서 성장 시에 많은 결함이 생긴다. 성장온도가 높으면 InN가 분해되고 낮을 경우에는 질소의 결핍이 일어난다. 최적성장온도의 선택이 매우 중요한 문제로 주목되었다. Si 도핑으로 중간온도 성장 시에 형성되는 결함을 감소시키고 광학적 특성을 향상시킨다고 보고되었다. 그러나, Si 도핑효과에 대한 구체적이고 체계적인 연구는 부족한 실정이다. MQWs 구조의 GaN 장벽층에 미치는 성장온도와 Si 도핑 효과를 이해하기 위해서는 고온에서 성잠시킨 GaN박막(HT-GaN) 위에 중간온도에서 성장된 GaN 에피층(IT-GaN)의 구조에 관한 연구가 선행되어야한다. 본 연구에서는 HT-GaN 위에 성장된 GaN 에피층에 미치는 성장 온도와 Si 도핑 효과에 관해 연구하였다.

• Journal of Food Hygiene and Safety
• /
• v.33 no.4
• /
• pp.248-254
• /
• 2018

To assess the risk of V. parahaemolyticus infection caused by consumption of raw oysters in Korea, contamination levels during the retail-to-table route of oysters was modeled to predict V. parahaemolyticus growth based on temperature and time. The consumed amount data of the KNHANES and the standard recipe of RDA were applied. A consumption scenario for exposure assessment was developed and combined with a Beta-Poisson dose-response model. The estimated probability of illness from consumption of pathogenic V. parahaemolyticus in raw oysters during three separate months (April, October, and November) was $5.71{\times}10^{-5}$ (within the 5th and 95th percentile ranges of $2.71{\times}10^{-8}$ to $1.03{\times}10^{-4}$). The results of the quantitative microbial-risk assessment indicated that the major factors affecting the probability of illness were the initial contamination level at the retailer, the consumed amount, the prevalence of pathogenic strains [tdh or trh genes], and exposure temperature and time.

• Microbiology and Biotechnology Letters
• /
• v.6 no.4
• /
• pp.155-159
• /
• 1978

Phenol utilizing yeast No. 558 isolated from soil sewage sediment was able to use substantial amount of phenol as the sole carbon source, and the biomass productivity by this organism was very excellent. This organism could grow well in 1000 ppm of phenol concentration, the maxim-um specific growth rate obtainable at pH 5.0, 3$0^{\circ}C$ was 0.27/hr., and the biomass yield coefficient Y vs. consumed phenol was 3.2. Maximum production rate of biomass was observed at 35$^{\circ}C$, pH 3.5 to pH 4.5, and the addition of the 0.005~0. 01% yeast extract was the most effective. Addition of HgCl$_2$ and phenyl hydrazine, inhibitors of oxide-reductase, in the phenol containing cultural liquid caused this organism no-growth at the concentration of 10$^{-5}$ M, 10$^{-3}$ M respectively. This organism could utilize not only phenol but catechol, resorcinol and benzidine.

• Composites Research
• /
• v.14 no.5
• /
• pp.1-11
• /
• 2001

The particulates reinforced metal matrix composites(PMMC) have a number of interesting mechanical properties. including high strength and good resistance to wear at high temperature and low thermal expansion. The equipment structure to obtain the homogeneous distribution in composites are proposed for the continuous pouring of reinforcement at the desired temperature. The particulates reinforced metal matrix composites(A357/SiCp) were fabricated by the process of the combined stirring method with the various fabrication process. The combined stirring method to niform distribution of particle is consisted of two stirring force both electro-magnetic stirring generated from induction heating and mechanical stirring with graphite stirrer. PMMC billets were fabricated with the volume fractions ranged from 0% to 20% and particle sizes ranged from 14${\mu}{\textrm}{m}$ to 25${\mu}{\textrm}{m}$. It is important to cont the size of primary $\alpha$-Al solid particles because it could become the cause of the particle pushing or capture phenomena from the fact that secondary dendrite arm spacing size depends on the cooling rate during the solidification in hypoeutectic Al-Si alloy. Therefore, the effect of primary $\alpha$-Al on the reinforcement distribution in matrix alloys has been investigated. The microstructure of PMMC fabracated with various volume fractions(0%, 10%, and 20%) and particle size were observed.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.34 no.10
• /
• pp.885-891
• /
• 2010

Thermal management is important for enhancing the performance and durability of polymer electrolyte membrane fuel cells (PEMFCs) and is taken into account in the design of PEMFCs. In general, cooling pates with circulating liquid coolant (water) are inserted between several unit cells to exhaust the reaction heat from PEMFCs. In this study, computational fluid dynamics (CFD) simulations were performed to characterize the uniform cooling performance of parallel multipass serpentine flow fields (MPSFFs) that were used as coolant flow channels in PEMFCs. The cooling performances of conventional serpentine and parallel flow fields were also evaluated for the purpose of comparison. The CFD results showed that the use of parallel MPSFFs can help reduce the temperature nonuniformity, and thus, can favorably enhance the performance and durability of PEMFCs.

• Journal of Korean Society of Forest Science
• /
• v.98 no.6
• /
• pp.748-756
• /
• 2009

The key for cultivating Lentinula edodes in sawdust bags with an appropriate strain and medium is to encourage the mushroom growth, while discouraging contaminating fungi by controlling environment, especially temperature and relative humidity (RH). To investigate the daily and seasonal fluctuation of temperature and RH in two L. edodes cultivation sheds types, HOBO data loggers was set and the collected data were analyzed. In a Taiwan type L. edodes cultivation shed, temperature and humidity changes were divided into five characteristic periods: mycelium growing winter, mushroom fruiting spring, mushroom fruiting early summer, mushroom nonfruiting summer and mushroom fruiting autumn. First, the mycelium growing winter was December to early March with daily mean temperature of $-1{\sim}8^{\circ}C$. Second, mushroom fruiting spring was mid March to late May with daily mean temperature of $8{\sim}21^{\circ}C$ and day-night temperature difference of $15^{\circ}C$. Third, the Mushroom fruiting early summer was early June to early July with 17 to $25^{\circ}C$. Fourth, nonfruiting summer was mid July to mid August with daily mean temperature of $25{\sim}28^{\circ}C$. Lastly, mushroom fruiting autumn was late August to October with daily mean temperature of $10{\sim}23^{\circ}C$ and with cyclic temperature change by $7^{\circ}C$ decrease and 5 increase every 5 to 7 days. In a Chinese type shed, temperature ranged $-1.9{\sim}5.0^{\circ}C$ during winter and $15{\sim}32^{\circ}C$ during June to October. Temperature and relative humidity changed $12{\sim}30^{\circ}C$ and 40~100%, respectively, depending on 0~150 cm shelf heights of by positions in the shed. In conclusion, to grow L. edodes but to discourage contaminating fungi, that is, not to be too high in temperature and RH, the growers changed temperature and RH by adjusting shading, aeration and insulation in the shed.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.08a
• /
• pp.341-341
• /
• 2011

최근 AMOLED 구동이 가능한 소자에 대한 연구가 활발히 진행중이다. AMOLED구동 가능소자는 LTPS TFT, a-Si TFT, OTFT, Oxide TFT가 있으며 그 중에서 현재 대부분 LTPS TFT를 사용하고 있다. LTPS TFT는 높은 전자 이동도와 안정성을 가지고 있기 때문에 현재 각광 받는 AMOLED에 잘 맞는다. 하지만 LTPS TFT는 고비용, 250$^{\circ}C$ 이상의 공정온도, Substrate가 Glass, Metal로 제한 된다는 문제점이 있으며, 균일성이 낮고 현재 대면적 기술이 부족한 상태이다. 해결방안으로 AMOLED를 타겟으로 하는 Oxide TFT 기술이 떠오르고 있다. Oxide TFT는 이동도가 높고 저온공정이 가능하며 Substrate로 Plastic 기판을 사용할 수가 있어 차후에 Flexible 소자로서의 적용이 가능하다. 또한 기존의 진공장비 사용대신 용액공정이 가능하여 장비사용시간 및 절차를 단축시킬 수 있어 비용적인 유리함을 가지고 있다. Oxide TFT는 단결정 산화물과 다결정 복합 산화물 두 가지 범주를 가지고 있다. Oxide TFT의 재료물질은 ZnO, ZTO, IZO, SnO2, Ga2O3, IGO, In2O3, ITO, InGaO3(ZnO)5, a-IGZO이 있다. 본 연구에서는 산화물질 중 하나인 ZTO를 이용하여 TFT 소자를 제작하였다. 산화물 특성상 열처리 온도에 따라 형성되는 결정의 정도가 다르기 때문에 온도 및 시간 변수에 따른 ZTO의 특성변화에 초점을 맞추어 연구함으로서 최적화된 조건을 찾고자 실험을 진행하였다. 실험을 위한 기판으로 n-type wafer을 사용하였다. PE-CVD 장비를 이용하여 SiNx를 120 nm 증착하고, ZTO 용액을 spin-coating을 이용하여 channel layer을 형성하였다. 균일하게 형성된 ZTO의 결정을 위하여 200$^{\circ}C$, 300$^{\circ}C$, 400$^{\circ}C$, 500$^{\circ}C$에서 1시간, 3시간, 6시간, 10시간의 온도 및 시간 변수를 두어 공기 중에서 열처리 하였다. ZTO는 약 30 nm 두께로 형성되었다. Thermal evaporator를 이용하여 Source, Drain의 알루미늄 전극을 형성하고, wafer 뒷면에는 Silver paste를 이용하여 Gate전극을 만들었다. 제작된 소자를 dark room temperature에서 측정하였다.