• Journal of the Korean Society for Railway
• /
• v.12 no.6
• /
• pp.944-952
• /
• 2009

This paper presents an analytical model for calculation of crack widths in reinforced concrete structures. The model is mathematically derived from the actual bond stress-slip relationships between the reinforcement and the surrounding concrete, and the relationships summarized in CEB-FIP Model Code 1990 and Eurocode 2 are employed in this study together with the numerical analysis result of a linear slip distribution along the interface at the stabilized cracking stage. With these, the actual strains of the steel and the concrete are integrated respectively along the embedment length between the adjacent cracks so as to obtain the difference in the axial elongation. The model is applied to the test results available in literatures, and the predicted values are shown to be in good agreement with the experimentally measured data.

• Journal of the Korea Concrete Institute
• /
• v.23 no.1
• /
• pp.87-98
• /
• 2011

Crack formations are inevitable in reinforced concrete structures. To estimate crack widths, empirical formulae are used widely and indirect crack controling methods of limiting bar spacing and bar diameter are also used due to their simplicity. In EC2, the characteristic crack width is calculated by multiplying maximum crack spacing and average strain. In this study, limit values of maximum bar spacing and bar diameter are examined as the material characteristics are varied. Two models of tension stiffening effect and maximum crack spacing and their effects are evaluated. The obtained results are compared with the values obtained using KCI method. The results showed that a significant difference is found when two tension stiffening effect are employed, and an under-estimation is found when 2nd order tension stiffening effect and maximum crack spacing limit from Part II were implemented. Therefore, a rational indirect crack control method attained using the tension stiffening effect of 2nd order form is needed. Also, a consistency in serviceabiliy analysis in flexural members needs to be secured. In order to achieve these goals, two crack controling models are suggested.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.6 no.4
• /
• pp.245-251
• /
• 2018

Recently, as the importance of structural maintenance has been increased, studies on self - healing concrete technology are being actively carried out. On the other hand, test for evaluating the self-healing performance is not standardized yet. Although visual test is used as a basic method for measuring crack widths, it is difficult to observe the crack width inside the specimen, and there is a disadvantage that only the local measurement of the surface can be measured due to the inhomogeneous cracking characteristics. Although permeability test has been widely used as an indirect method for measuring crack width, there is a problem due to the viscosity of water, and also a possibility that the internal material of the specimen may be eluted during the test. In this study, we propose a crack width evaluation method using gas diffusion characteristics. Idealized straight cracks were fabricated by acrylic and the diffusion coefficients of specimens were analyzed with respect to crack width and thickness. The experimental results show that the crack width and the diffusion coefficient are in a linear relationship and that the thickness and diffusion coefficient are inversely related.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.34 no.11
• /
• pp.1715-1720
• /
• 2010

In this study, we analyzed the crack-healing characteristics of specimens; different crack lengths and coating methods of $Si_3N_4$ ceramic structures with long cracks were analyzed. Cracks with lengths of about $100-500\;{\mu}m$ were obtained using a Vickers indenter for a load of 24.5-98 N. In the case of a crack obtained by applying a load of 24.5 N, the crack-healed specimen with $SiO_2$ nanocolloid coating exhibited the highest bending strength, which was higher than that of a smooth specimen by 140%, but the bending strength of a crack-healed specimen that had a $SiO_2$ nanocolloid coating and originally had multiple cracks was lower than that of a smooth specimen. However, when compared to the cracked specimens, the bending strength of most specimens with multiple cracks increased slightly. On the basis of these results, the crack-healing characteristics of $Si_3N_4$ ceramic structures with multiple indentations were studied for different coating methods. The most effective coating method for long-crack specimens was hydrostatic pressure coating.

• Journal of the Korean Society of Groundwater Environment
• /
• v.6 no.3
• /
• pp.111-119
• /
• 1999

The purpose of this study is the simulation of discontinuous rockmass and identification of characteristics of discontinuity network as a branch of the study on characteristics of groundwater system in discontinuous rockmass for evaluation of safety on disposal site of radioactive waste. In this study the site for LPG underground storage was selected for the similarities of the conditions which were required for disposal site of radioactive waste. Through the identification of hydraulic properties. characteristics of discontinuities and selection of discontinuity model around LPG underground storage facility. the applications of discrete fracture network model were evaluated for the analysis of pathway. The orientation and spatial density of discontinuities are primarily important elements for the simulation of groundwater and solute transportation in discrete fracture network model. In this study three fracture sets identified and the spatial intensity (P$_{32}$) of discontinuities is revealed as 0.85 $m^2$/㎥. The conductive fracture intensity (P$_{32c}$) estimated for the simulation area around propane cavern (200${\times}$200${\times}$200) is 0.536 $m^2$/㎥. Truncated conductive fracture intensity (T-P$_{32c}$) is calculated as 0.26 $m^2$/㎥ by eliminating the fracture with the iowest transmissivity and based on this value the pathway from the water curtain to PC 2. PC 3 analyzed.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1996.11b
• /
• pp.481-486
• /
• 1996

원자력 발전소의 증기 발생기 전열관으로 사용되는 합금 600MA는 미세 구조에 관계없이 가성 용액에서 입계 균열이 발생한다. 본 연구에서는 합금 600 2종과 합금 690 2종의 이음매없는 관 및 진공 용해한 합금 690M 2종의 MA 및 TT재에 대한 부식 조건의 변화에 응력 부식 균열 특성을 일정연신율법(CERT) 및 C-ring법으로 평가하였다. 가성 응력 부식 균열 저항성에 미치는 TT처리의 효과는 용액 조건에 관계없이 TT처리를 행하게 되면 응력 부식 균열에 대한 저항성이 증가하는 것으로 나타났으며, 분극 저항성과는 직접적인 관계가 나타나지 않고 다른 미세 조직 등에 의한 영향을 더 크게 받고 있는 것으로 판단된다. 가성 용액에서의 응력 부식 균열 저항성에 미치는 SO$_4$$^{=}$ 이온의 첨가 효과는 TT처리의 유무에 관계없이 응력 부식 균열 저항성을 크게 감소시키고 있다. 한편 합금 690의 가성 응력부식 균열 저항성에 미치는 Mo의 효과는 Mo이 첨가될수록 응력 부식 균열 저항성이 증가하는 것으로 나타났다.

• Journal of the KSME
• /
• v.28 no.4
• /
• pp.343-348
• /
• 1988

몇 가지 균열검출법 및 크기의 측정법에 대하여 개요, 문제점, 정량적 측정에 유의해야 할 점을 살펴보았다. 아직 어느 방법도 모든 균열에 적용할 만큼 완전한 방법은 없지만 적용범위와 유 의사항을 이해하고 측정대상에 맞는 방법을 올바로 적용한다면 목적에 부합하는 결과를 얻을 것으로 본다. 기기나 구조물의 파괴원인을 정확히 규명하고 잔존수명을 정확히 예측하여 파괴를 방지하려면 재료의 강도특성이나 파괴역학적 해석법의 연구에 못지 않게 비파괴적 균열검출법과 정량적 측정법에 관한 연구도 깊이 이루어져야 하리라 믿는다. 그러나 아직 우리나라에서는 이 점에 미흡함이 많다. 더 나은 측정방법을 고안해 내고, 측정장치를 개발하여 균열에 대한 정보 의 정확성을 높여 구조물의 안전성 평가의 신뢰성을 향상시킬 수 있는 연구가 활발히 진행되 어야 할 것이다.

• Journal of the Korea Concrete Institute
• /
• v.15 no.6
• /
• pp.802-810
• /
• 2003

In this paper, the modified singular fracture process zone (S-FPZ) model is proposed to consider variation of a fracture criterion for continuous crack propagation in concrete. The fracture properties of the proposed fracture model are strain energy release rate at a micro-crack tip and crack closure stress (CCS) versus crack opening displacement (COD) relationship in the FPZ. The proposed model can simulate the estimated fracture energy of experimental results. The analysis results of the experimental data shows that specimen geometry and loading condition did not affect the CCS-COD relation. But the strain energy release rate is a function of not only specimen geometry but also crack extension. Until 25 mm crack extension, the strain energy release rate is a constant minimum value, and then it increased linearly to the maximum value. The maximum fracture criterion occurred at the peak load for an large size specimen. The fracture criterion remains the maximum value after the peak load. The variation of the fracture criterion is caused by micro-cracking and micro-crack localizing. The fracture criterion of strain energy release rate can simply be the size effect of concrete fracture, and it can be used to quantify the micro-tracking and micro-crack localizing behaviors of concrete.

• The Journal of Engineering Geology
• /
• v.21 no.4
• /
• pp.295-304
• /
• 2011

The first step in improving our understanding of uncertainties suclt as rock mass strength parameters and deformation modulus in rock masses around high-level radioactive waste disposal repositories, for improved safety, is to study the process of crack development in intact rock. Therefore, in this study, the fracture process and crack development were examined in samples of KURT granite taken from the KAERI Underground Research Tunnel (KURT), based on acoustic emission (AE) and moment tensor analysis. The results show that crack initiation, coalescence, and unstable crack occurred at rock uniaxial compressive strengths of 0.45, 0.73, and 0.84, respectively. In addition, moment tensor analysis indicated that during the early stage of loading, tensile cracks were predominant. With increasing applied stress, the number of shear cracks gradually increased. When the applied stress exceeded the stress level required for crack damage, unstable shear cracks which directly result in failure of the rock were generated along the failure plane.

• Proceedings of the KSEEG Conference
• /
• 2007.04a
• /
• pp.612-614
• /
• 2007