• Journal of Satellite, Information and Communications
• /
• v.6 no.1
• /
• pp.37-44
• /
• 2011

COMS(Chollian) satellite which was launched on June 26, 2010 has three payloads for Ka-band communications, geostationary ocean color imaging and meteorological imaging. In order to make efficient use of the geostationary satellite, a concept of mission operations has been considered from the beginning of the satellite ground control system development. COMS satellite mission operations are classified by daily, weekly, monthly, and seasonal operations. Daily satellite operations include mission planning, command planning and transmission, telemetry processing and analysis, ranging and orbit determination, ephemeris and event prediction, and wheel off-loading set point parameter calculation. As a weekly operation, North-South station keeping maneuver and East-West station keeping maneuver should be performed on Tuesday and Thursday, respectively. Spacecraft oscillator updating parameter should be calculated and uploaded once a month. Eclipse operations should be performed during a vernal equinox and autumnal equinox season. In this paper, operational validations of the major functions in COMS SGCS are presented for the first three month of in-orbit test operations. All of the major functions have been successfully verified and the COMS SGCS will be used for the mission operations of the COMS satellite for 7 years of mission life time and even more.

• Journal of Astronomy and Space Sciences
• /
• v.23 no.2
• /
• pp.127-134
• /
• 2006

Variation of the Local Time of Ascending Node (LTAN) has been analysed according to initial inclinations when the altitude of Sun-synchronous satellite is continuously decreased due to the atmospheric drag. Orbit predictions of 3 years have been performed with the satellite of 500 km altitude when the initial LTAN were set to 06:00, 09:00, 12:00, 15:00, and 18:00. Different profiles of the inclination and LTAN have been obtained according to the satellite altitude decay and initial LTAN value. Using the profiles of the inclination and LTAN, initial orbital elements can be derived for minimizing the LTAN variations during the mission life time of the sun-synchronous satellite without any on-board thrusters for orbit maneuvers.

• The Bulletin of The Korean Astronomical Society
• /
• v.37 no.2
• /
• pp.198.1-198.1
• /
• 2012

저궤도 위성이 발사체에서 분리된 후 탑재 소프트웨어에 의한 초기 동작이 수행되고 나면 초기 운용이 시작된다. 초기 운용 기간에 수행할 모든 절차와 대처 가능한 긴급 상황이 발생할 경우 수행할 절차는 발사 전에 미리 준비된다. 위성의 각 부분의 설계 마진은 최악 조건을 기준으로 반영되어 있기 때문에 발사 이후의 버스 시스템 관점에서의 위성 특성은 요구 사항을 만족하는 범위가 될 것으로 예상이 가능하다. 실제로 발사 후 위성 텔레메트리 분석을 통해 대부분의 항목에서 요구 조건을 만족하는 것으로 확인되었다. 또한 텔레메트리 분석을 통해 설계 단계에서 예상했던 것 보다 정확한 궤도 특성이 반영된 위성 특성을 파악하였다. 이러한 특성은 설계 시 고려했던 상황과 다르더라도 실제 궤도 특성이 반영된 특성이므로 초기 운용 및 정상 운용 시에 정상적인 상황인 것으로 고려해야 한다. 첫째, 지구 알베도 특성에 따라 태양센서 값이 궤도에 따라 변화한다. 위성의 자세가 정확히 태양을 지향하고 있더라도 태양센서에 지구에서 반사된 빛이 입사되어 자세 제어에 영향을 주게 된다. 알베도의 영향은 적도에서 극지방으로 갈수록 커지며, 계절에 따라 다른 특성을 보인다. 알베도의 영향을 최소화하기 위해 자세 제어 모델에 알베도 효과를 고려하거나 알베도 효과를 무시할 수 있을 정도로 자세 제어 오차 한계를 조정할 수 있다. 둘째, 위성의 지구 회피 회전에 의해 태양 전지판의 온도가 궤도에 따라 변화한다. 위성체는 위성체에 장착된 두 개의 별센서의 가시성 확보를 위해 태양 지향 자세에서 요축으로 일정 속도로 회전한다. 남극 부근에서는 두 태양 센서가 모두 지구의 반대편인 남쪽을 지향하도록 하며, 북극 부근에서는 북쪽을 지향하도록 한다. 이 때 두 태양 센서의 방향에 장착된 태양 전지판은 극지방에서 지구 반대편에 위치하므로 다른 태양 전지판에 비해 낮은 온도를 갖게 된다. 이 논문에서는 위성의 궤도 특성에 따른 고려 사항에 대해 설명하였다.

• The Bulletin of The Korean Astronomical Society
• /
• v.37 no.2
• /
• pp.166.2-166.2
• /
• 2012

국내에서 개발한 고기동 저궤도 위성이 일본 다네가시마 우주센터에서 2012년 5월 18일 발사되었다. 자세제어계는 위성의 임무수행을 완수할 수 있도록 발사 후부터 위성 수명 기간 동안 자세명령을 생성하고 제어 및 결정을 하며, 궤도 조정과 모멘텀 덤핑등의 임무를 수행한다. 이러한 임무 수행을 가능하게 하기 위해 자세제어계는 적절한 센서와 구동기 조합을 사용하여 추력기 기반 안전모드, 궤도 조정을 위한 Del-V Burn 기동 모드, 태양지향 서브모드 및 목표지향 서브모드 등을 설계했다. 고기동 위성의 초기 운용 중 자세제어계는 자세제어계 하드웨어의 초기 구동 및 점검을 수행하고 설계한 각 모드의 기능과 성능 확인을 수행하게 된다. 본 연구는 성공적으로 완료한 자세제어계 하드웨어의 초기 점검 결과를 소개하는 것이 목적이다. 초기 운용은 위성이 발사된 직후 탑재컴퓨터가 깨어나면서부터 시작되는데, 발사 후 최초 접속시 추력기 기반 안전모드에서 태양 획득 성능 및 제어 성능을 확인한 후 정상 상태 모드인 태양지향 자세로 전환하기 위해 자세제어계 하드웨어인 별 추적기, 자기토커, 반작용휠의 초기 구동 및 점검을 수행하였다. 본 연구에서는 각 하드웨어의 초기 구동 점검과 성능 및 기능 요구조건 만족에 대한 성능 분석 결과를 정리하였다.

• Proceedings of the KSR Conference
• /
• 2007.11a
• /
• pp.517-528
• /
• 2007

Domestic or international existing researches regarding rail damage factors are focused on laying, vehicle conditions, driving speed and driving habits and overlook characteristics of track structure (elasticity, maintenance etc). Also in ballast track, as there is no special lateral spring stiffness of track also called as ballast lateral resistance in concrete track, generally, existing study shows concrete track has 2 time shorter life cycle for rail replacement than ballast track due to abrasion. As a result of domestic concrete track design and operation performance review, concrete track elasticity is lower than track elasticity of ballast track resulting higher damage on rail and tracks. Generally, concrete track has advantage in track elasticity adjustment than ballast track and in case of Europe, in concrete track design, it is recommended to have same or higher performance range of vertical elastic stiffness of ballast track but domestically or internationally review on lateral spring stiffness of track is very minimal. Therefore, through analysis of service line track on site measurement and analysis on performance of maintenance, in this research, dynamic characteristic behaviors of commonly used ballast and concrete track are studied to infer elasticity of service line track and experimentally prove effects of track lateral spring stiffness that influence curved rail damage as well as correlation between track elasticity by track system and rail damage to propose importance of appropriate elastic stiffness level for concrete and ballast track.

• Aerospace Engineering and Technology
• /
• v.12 no.2
• /
• pp.57-63
• /
• 2013

The mission of a lot of satellites on geostationary orbit is the communication and/or the broadcasting. These satellites need a big power, so these have a large solar array. Recently, the new satellite for Earth environment monitoring is developing on geostationary orbit. The payload of Earth monitoring satellite requires better thermal condition on detector. Therefore this satellite uses a boom for the attitude stability instead of rejecting one-side solar array as a heat source. The other hand, it uses some momentum wheels being a more momentum capacity to control the large disturbance by solar pressure due to the asymmetric solar array configuration. In this paper, the analysis on the wheel allocation and the wheel off-loading for COMS is summarized and the results are verified by telemetry of COMS. COMS has no boom and a perfectly asymmetric solar array configuration, and it is operating well on geostationary orbit.

• Journal of the Korean Chemical Society
• /
• v.28 no.4
• /
• pp.217-230
• /
• 1984

The MINDO/3 method was used in determination of transition states and activation barriers for various 1,2-, 1,3- and 1,5-sigmatropic hydrogen rearrangements involving systems with central carbon atom. It was found that, besides the consideration of orbital symmetry, steric effect, aromaticity, and orbital interactions were found to dictate the stability of the transition state. For systems with hetero atoms, lone pair orbitals tend to ease orbital distortion required at the transition state by participating in hydrogen transfer process and were found to lower the activation barrier accordingly. Comparison of the relative barrier heights with those obtained by using more sophisticated ab initio MO calculations showed that the MINDO/3 results give qualitatively the same tendency of the relative order of the activation barriers.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.47 no.4
• /
• pp.283-288
• /
• 2019

In this paper, there is summarized the validation of ground test results through the telemetry acquired during on-orbit initial activation on solar-array drive assembly(SDA) of GK2A launched at Dec-5, 2018. Especially, the decision logic of SDA initial position and the compensation logic are validated and confirmed. The SDA initial position is needed when GK2A enter to geostationary orbit from transfer orbit and the compensation logic is for the accumulated position error due to the open-loop control. Up to now, it is normal operating. Also the periodic offset between the geostationary orbit and Sun position is found that it is not checked on design phase, and then the proper threshold value is applied.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.6
• /
• pp.383-388
• /
• 2020

This study aimed to identify the influence of the power components of the ammunition vehicle on the maximum speed. The maximum speeds of the engine and transmission changes were 3% and 1.7%, respectively. In the case of strong tension based on the track tension, the decrease was 4.6%. A 1.5% increase was obtained when the tension was weak. An examination of the maximum speed by dividing the track tension into six sections revealed the maximum speed to be highest when it was maintained below the middle. Experiments were performed by varying the orbital tension on both sides of the equipment. The maximum speed of the machine was affected by a large part of the tension. The maximum speed test was conducted by adjusting the tension at the driving test site. The results showed that when the tension was strong, the speed was 16.7% higher than the standard requirement. The speed was 28.3% at low tension. The influence of the maximum speed on the track tension was confirmed; the effect was greater than replacing the large parts.

• Journal of Astronomy and Space Sciences
• /
• v.22 no.4
• /
• pp.527-536
• /
• 2005

The perturbations caused by the Sun and the Moon are predominantly out-of-plane effects causing a change in the inclination and in the right ascension of ascending node of a geostationary satellite. Due to the change of the inclination, subsatellite latitude of the geostationary satellite has a daily variations of the same magnitude of the inclination. Therefore we need a facility to control the orbital inclination and right ascension of ascending node for maintaining the satellite position in specified subsatellite latitude boundary using thrusters. In this paper we studied North-South station keeping strategies of the COMS-1 such as Track-Back Chord Target (TBCT) method, Maximum Compensation Target (MCT) method and Minimum Fuel Target (MFT) method. We accomplished those North-South station keeping maneuvers for one year starting from December 2008. The required velocity increments to maintain the satellite are estimated as MCT 52.6065m/s, TBCT 52.2383m/s, MFT 51.5428m/s, respectively. We demonstrated that TBCT and MFT methods are proper to North-South station keeping for COMS-1. MFT method showed the minimum required velocity increments whereas TBCT traced narrow inclination boundary area for North-South station keeping.