• Journal of Astronomy and Space Sciences
• /
• v.20 no.1
• /
• pp.21-28
• /
• 2003

In case that we independently obtain orbital informations about the low earth satellites of foreign countries using radar systems, we develop the orbit determination algorithm for this purpose using a SGP4 model with an analytical orbit model and the extended Kalman filter with a real-time processing method. When the state vector is Keplerian orbital elements, singularity problems happen to compute partial derivative with respect to inclination and eccentricity orbit elements. To cope with this problem, we set state vector osculating to mean equinox and true equator cartesian elements with coordinate transformation. The state transition matrix and the covariance matrix are numerically computed using a SGP4 model. Observational measurements are the type of azimuth, elevation and range, filter process to each measurement in a lump. After analyzing performance of the developed orbit determination algorithm using TOPEX/POSEIDON POE(precision 0.bit Ephemeris), its position error has about 1 km. To be similar to performance of NORAD system that has up to 3km position accuracy during 7 days need to radar system performance that have accuracy within 0.1 degree for azimuth and elevation and 50m for range.

• Journal of Astronomy and Space Sciences
• /
• v.17 no.1
• /
• pp.107-116
• /
• 2000

This paper presents the preliminary survey and simulation results of the prediction of Leonid stream's orbital motion. Based on the model survey on eject velocity and perturbation of meteoroid particles, a simulation program was developed and applied to orbital motion of Leonid stream. The Jones ejection distribution model was used to describe the particle's eject velocity and the orbital dynamic model includes perturbations of major planet's gravity. DE405 ephemeris file generated by Solar System Dynamics Group at Jet Propulsion Laboratory in NASA was used for the planet's ephemeris calculations. Solar radiation pressure were also considered in the simulation and 8th order Runge-Kutta algorithm was used a numerical integration method.

• Bulletin of the Korean Space Science Society
• /
• 2009.10a
• /
• pp.26.3-27
• /
• 2009

한 기의 영상레이더 위성을 이용하여 동일한 촬영지역에 대해 적절한 기선벡터(Baseline)을 유지하는 두 장(scene)의 영상을 획득하여 그 지역의 정밀 표고차를 추출하는 레이더 간섭계(Interferometry) 임무를 수행하기 위해서는 반복지상궤적을 유지하도록 위성의 궤도를 주기적으로 조정해 주어야 한다. 이 연구에서는 반복지상궤적 유지 정밀도를 극대화시키기 위하여 최적의 기준궤도를 생성하고 이를 유지하기 위한 속도증분 및 궤도 조정 일정을 산출할 수 있는 궤도최적화 S/W 를 개발하였다. 이 연구의 최적 궤도 설계 문제는 다음과 같다. "시작시간 $T_0$에서 초기 접촉궤도 상태벡터 (ECEF 위치 및 속도벡터) $x_0$이고, 지상궤적반복주기 p 이후의 시간 $T_0+p$에서도 초기 접촉궤도 상태벡터와 동일한$x_0$가 되도록 궤도를 유지하려고 할 때, 여명 궤도(dawn-dusk and sun-synchronous orbit)에서 운영되는 위성의 연료소모(또는 속도증분)를 최소화시키는 가상의 궤도조정(maneuver) 횟수, 시기, 크기를 찾아라." 이 연구에서는 궤도최적화 문제를 풀기 위하여 GRACE 중력모델(GGM02C)이 적용된 수치적 방법의 위성궤도예측 알고리즘을 시스템 설계에 적용하였고, 매개변수 최적화 방법 중 구속조건이 있는 비선형 최적화 기법의 하나인 연속 2차 계획법(sequential quadratic programming)을 사용하여 해를 구하였다. 개발된 궤도최적화 S/W의 성능을 분석하기 위하여 고도 550km의 여명궤도를 돌며 지상궤적반복주기가 28일인 영상레이더 위성에 대해 적용하였다. 해석 결과를 통해, 비록 시스템의 비선형이 큼에도 불구하고 최소의 속도증분으로 정밀한 반복지상궤적이 유지됨을 알 수 있었다.

• Bulletin of the Korean Space Science Society
• /
• 2009.10a
• /
• pp.27.1-27.1
• /
• 2009

인공위성 광학 감시 시스템 적용에 가장 효과적인 고전적 예비 궤도 결정법은 Gauss와 Laplace 방법이 있다. 이 두 방법은 세 쌍의 광학 관측 자료를 이용하여 위성의 궤도를 결정하는 방법으로 관측 시간간격에 따라 정밀도가 변화하는 특성이 있다. 이번 연구에서는 이러한 특성에 관련된 국내의 기존 연구 결과들에서 일부 상이한 점을 발견하여, 세 점의 시간간격에 대한 정밀도 변화 특성을 재검토해 보았다. 이러한 특성 연구는 다양한 위성 궤도 형태를 고려해야 하기 때문에 궤도 정보가 알려진 위성 전체를 대상으로 하였다. SGP4/SDP4 궤도전파 모델을 이용한 모의 관측 자료를 사용하여 방법론적인 정밀도 특성을 확인하였고, 특정 위성의 실제 관측 자료를 사용하여 인공위성 광학 감시시스템에 적용할 시에 발생되는 특성을 확인하였다. 결과적으로, 세 점의 시간간격에 대한 정밀도 변화 특성은 관측된 위성의 위치로 인해 달라질 수 있음을 확인하였다.

• Korean Journal of Remote Sensing
• /
• v.22 no.4
• /
• pp.285-294
• /
• 2006

A numerical formula that presents relationship between a point of a satellite image and its ground position is called a sensor model. For precise geolocation of satellite images, we need an error-free sensor model. However, the sensor model based on GOES ephemeris data has some error, in particular after Image Motion Compensation (IMC) mechanism has been turned off. To solve this problem, we investigated three sensor models: collinearity model, direct linear transform (DLT) model and orbit-based model. We applied matching between GOES images and global coastline database and used successful results as control points. With control points we improved the initial image geolocation accuracy using the three models. We compared results from three sensor models. As a result, we showed that the orbit-based model is a suitable sensor model for precise geolocation of GOES-9 Images.

• Journal of the Korean Society for Railway
• /
• v.15 no.5
• /
• pp.485-497
• /
• 2012

Recently, with increasing social interests on noise and vibration induced by railway traffic, the application of floating slab track that can efficiently reduce the railway vibration is increasing. In this study, to more accurately understand the dynamic behavior of the floating slab track, a laboratory mock-up test has been performed, and the static and dynamic behaviors at frequency range near the system resonance frequency were explored. Based on the test results, the design of the floating slab track and the structural analysis model used in the design have been verified. The analytic and test results demonstrate that the dominant frequency of the floating slab track occurs at the frequencies between vertical rigid body mode natural frequency and bending mode natural frequency, and the dominant deformation mode is close to the bending mode. This suggests that in the design of the floating slab track, the bending rigidity of the slab and the boundary conditions at slab joints and slab ends should be taken into consideration. Also, the analytic results by the two-dimensional finite element analysis model using Kelvin-Voigt model, such as static and dynamic deflections and force transmissibility, are found in good agreement with the test results, and thus the model used in this study has shown the reliability suitable to be utilized in the design of the floating slab track.

• Journal of Korean Society of Steel Construction
• /
• v.11 no.3 s.40
• /
• pp.281-290
• /
• 1999

For many decades, the railway was constructed using tracks with jointed rails of relatively short lengths in accordance with rolling and handling technology. The joints cause many drawbacks in the track and lead to significant maintenance cost. So, railroad engineers became interested in eliminating joints to increase service loads ana speeds by improving rolling, welding, and fastening technology. Continuous welded rail(CWR) track has many advantages over the conventional jointed-rail track. But, in the case of the elimination of rail joints, it may cause the track to be suddenly buckled laterally by thermal loads. In this paper, CWR track model and CWRB program are developed for linear buckling analysis using finite element method. Rail element with a total of 14 degrees of freedom is used. The stiffness of the fastener, tie, and ballast bed are included by a set of spring elements. The investigation on the buckling modes and temperature of CWR track is presented.

• Journal of the Korean Society for Railway
• /
• v.13 no.6
• /
• pp.565-569
• /
• 2010

Sleepers perform bearing rails and are underneath rails. Therefore, the current and voltage of rails are related to the resistance of sleepers. In case that the resistance of sleepers are low, operation problems of relays in tr ack circuits are occur because of flowing leakage current through sleepers. So the condition that the track circuit is always occupied by a train is kept. Currently, the creosote has been used in wood sleepers due to prevention against putrefaction. After a long time, the material is changeable to the chemistry material bases on carbon dioxide or carbon. So, the insulation resistance of wood sleepers is lower than the initial insulation resistance. In case of effecting wood sleepers as conductors, amplitude of the current and voltage on rails is decreased. This phenomenon causes that a train does not receive signals. In this paper, four-network model on the track circuit including the insulation resistance of sleepers is suggested. Also, the standard value of the resistance in straight section is proposed in the wood sleeper.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2017.05a
• /
• pp.65-68
• /
• 2017

In this paper, a multipactor test for the space qualification model of the X-band dual-mode high-power channel filter for high-speed data transmission of geostationary satellite observation payloads was conducted and compared with the 8 dB margin required for design. It was confirmed that analytically required margins were met through testing and that satisfactory test results were obtained. The design and test of the multipactor are tested according to the ECSS standard. Based on this, it is suggested that if the margin of design is sufficiently secured, it can be used in the development of the filter for space qualification model without any test.

• The Bulletin of The Korean Astronomical Society
• /
• v.37 no.2
• /
• pp.137.2-137.2
• /
• 2012

위성이 우주에서 노출되는 우주방사선 환경은 위성의 임무궤도 및 임무 기간에 따라 크게 달라진다. 지구 주위의 자기장에 의해 갇혀있는 양성자 및 전자의 환경은 고도에 따라 밀도 및 분포의 차이를 보인다. 특히 밴 앨런 밸트 내의 경계부분을 넘어서는 높은 고도에서의 방사선 입자별 노출 환경은 저궤도의 환경과는 구성 및 영향성이 크게 다르다. 본 논문에서는 전자 밸트 고도에서 운영되는 정지궤도 위성의 우주방사선 입자 환경을 분석하였다. 지구 자기장에 갇힌 입자, 태양입자 및 외부은하 입자 환경을 모델별로 분석하였으며 각 입자별 Flux 및 Fluence 스펙트럼을 이용하여 총 이온화 조사량과 중이온 스펙트럼을 도출하였다.