• Journal of the Korean Society for Railway
• /
• v.13 no.3
• /
• pp.271-277
• /
• 2010

In this paper, a numerical model for a Kevlar/Epoxy and Carbon-Kevlar/Epoxy tube used as an energy absorbing component has been developed and then results have been verified through experiment. The 2D shell element and Chang-Chang failure criterion of LS-DYNA that is commercial explicit FE code was used. Mechanical material properties for the model were obtained by material testing in advance. The numerical results were compared with quasi-static test results under axial compressive loading at 10mm/min. From the results, in the case of the Kevlar/Epoxy tube, load-crushed displacement curves were very close to the experiments and SEA (specific energy absorption) shows a good agreement with experimental one within less than 6%. However, the Carbon-Kevlar/Epoxy tube shows some differences with the experimental results.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.20 no.6
• /
• pp.572-581
• /
• 1991

For the development of a model to predict absorbed salt quantity in radish during salting, absorbed salt quantity and water content change in radish by the hour were measured at 5%, 10%, 15% brine concentration and $10^{\circ}C,\;20^{\circ}C,\;30^{\circ}C$ respectively. Absorbed salt quantity in radish by the time showed logarithmic function, absorbed salt quantity by brine concentration and temperature showed linear relation. A model to predict absorbed salt quantity in radish at each time, brine concentration and temperature was calculated by the regression program of SPSS. Apparent diffusivity of salt in radish was calculated from appropriated diffusion equation solution of Fick's second law using computer simulation. Salt diffusivity in radish increased as brine concentration increased and the effect of temperature could by expressed by Arrhenius equation. A model equation which could predict salt diffusivity was developed by regression analysis. To specify relation between salt quantity which absorbed into radish and water content which removed out of it, Flux ratio(${\Delta}W/{\Delta}S$) was calcuated. The values showed that the removed water content was greater than the absorbed salt quantity.

• Korean journal of applied entomology
• /
• v.50 no.4
• /
• pp.267-278
• /
• 2011

This study was conducted to estimate the effects of fire intensity and recovery methods on coleopteran communities in three burned forests, Goseong, Gangneung, and Samcheok in Gangwon province, Korea. Four sampling sites were selected in each study area according to disturbance degree (DD) caused by fire intensity and recovery methods. DD in the study sites were categorized as 0 (no fire), 1 (weak fire), 2 (strong fire), and 3 (strong fire followed by human disturbance). Beetles collected by pitfall traps were classified into 3 functional guilds: detritivore, herbivore, and carnivore. Diversity and abundance were slightly higher in the burned sites (DD = 1-3) than in the unburned sites (DD = 0), although there was no statistical significance. Coleopteran communities differed according to fire intensity and recovery method. This suggests that recovery of burned forests using both natural recovery and reforestation may increase the diversity of coleopteran communities.

• Korean Journal of Food Science and Technology
• /
• v.3 no.2
• /
• pp.94-100
• /
• 1971

Free and total glutamic acid (GA) in 76 items of Korean foods have been determined by manometric method using glutamate decarboxylase(EC 4 1 1 15). Free GA contents are $10{\sim}20$ in cereals, $20{\sim}30$ in legumes, about 30 in meats, $10{\sim}30$ in marine products, and less than 10mg (w/w) in vegetables. While those of total GA are determined to be about 3 in wheat products, 2 in bareley, 1 in other cereals, 5 in soybean and peanut, 3 in meats, $2{\sim}3$ marine products, and less than 0.5% (w/w) in vegetables. Free GA content in soy sauce is exceedingly high to amount 1% (w/v). The estimated dietary intakes of total and free GA calculated on the basis of the above data along with those of food consumption survey are $9{\sim}16g\;and\;400{\sim}700\;mg$ per day per person, respectively.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.27 no.3
• /
• pp.541-548
• /
• 2017

The smartphone operates the media server daemon to handle audio service requests. Media server daemons, running with a high privilege in the background, caused many vulnerabilities to applications most frequently used in smart devices including smartphones. Fuzzing is a popularly used methodology to find software vulnerabilities. Unfortunately, fuzzing itself is not much effective in such format-strict environments as media services. In this paper, we propose a file format-aware fuzzing in order to efficiently detect vulnerabilities of media server daemon. We acquired a remote arbitrary code execution vulnerability on iOS/tvOS/MacOS/watchOS, and we verified the effectiveness by comparing our methodology with the fuzzers FileFuzz and ZZUF.

• Restorative Dentistry and Endodontics
• /
• v.23 no.1
• /
• pp.515-524
• /
• 1998

The purposes of this study were to observe the cavity wall morphology and to evaluate the degree of cavity cleanliness when root-end retrograde cavity preparation was done with ultrasonic diamond instruments. To observe the morphology of retrocavity and to evaluate the degree of cavity cleanliness. root-end resections were done on 20 palatal roots of extracted maxillary first molars after canal filling with gutta-percha. Retrocavities were prepared using either ultrasonic diamond instruments or stainless steel ones of medium power setting of level 6 ($Miniendo^{TM}$, EIE, CA, U.S.A.). Morphology of the cavity. degrees of the remaining canal debris and smear layer were evaluated under the scanning electron microscope. The results were as follows: Cavities prepared with ultrasonic diamond instruments showed scratched appearance of wall, while ultrasonic stainless steel preparation showed hatcheted appearance. Ultrasonic diamond instruments induced more smear layer than stainless steel ones did (p<0.01) in the cavity. However, there was no significant difference in canal debris (p>0.05).

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2008.11a
• /
• pp.459-462
• /
• 2008

In manufacture of slurry fuel, the effects of process parameters on the carbon dispersion stability have been investigated. The particle size and contents of the carbon slurry taken from 3 (top, medium, bottom) positions in fuel reservoir were analyzed to estimate the dispersion of the carbon in Jet A-1. Through the application of various additives, it was found that NB463S84 additive showed the best dispersion and stability of carbon at accelerated gravity condition. The mixer performance was compared by the observation of height change of carbon-containing layer and measurement of particle sizes at the same conditions. Application of the mixing conditions obtained from the lab-scale to bench scale manufacture confirmed the practical feasibility of our research.

• Korean Journal of Plant Resources
• /
• v.14 no.3
• /
• pp.241-246
• /
• 2001

Effects of cutting media on shooting and seedling characteristics were investigated to determine productivity of seedling by root cuttings of lacquer tree. Shoots developed at 3 weeks after cut planting on PV (peat moss : Vermiculite : 1 : 1), PVS (peat moss : Vermiculite : Sand : 1 : 1 : 2) and PVSC (peat moss : Vermiculite : Sand : Clay loam : 1 : 1 : 2 : 2) media, and shooting rate was the highest in PVSC medium at 10 weeks after cut planting among the treatments. Shooting numbers per scion on PH and PVC media were 2.2 but those on HSC medium was 1.3, which was not significantly different among media. PVSC medium was suitable to use the root cuttings of lacquer tree as it meets the qualifications requirements. Seedlings on PVSC medium were excellent to transplant in field as tree height, branch number, leaf number, stem diameter and leaf area were good.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.12 no.4
• /
• pp.329-340
• /
• 2010

Mechanical behavior of underground cavity construction such as tunnel is very difficult to estimate due to complexity and uncertainty of ground. Prediction of behavior according to excavation of tunnel mainly uses method utilized of model test or numerical analysis. But scale model test is difficult to reappear field condition, numerical analysis is also very hard to seek choice of suitable constituent model and input data. To solve this problem, this paper forecasted the deformation of tunnel that applied to information of crown settlement and convergence, RMR in weathered granite by using the regression analysis. The result of the analysis shows that the crown settlement according to excavation occurs approximately 70~80% of total displacements within about 20 days. As a result of the prediction of crown settlement and convergence, an exponential function becomes more accurate at measurements than an algebraic function. Also this paper got a correlation in comparison of RMR and displacements of 6 sections.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.18 no.6
• /
• pp.1081-1086
• /
• 2023

The rapid growth and increasing complexity of modern networks have highlighted the limitations of traditional network architectures. The emergence of SDN (Software-Defined Network) in response to these challenges has changed the existing network environment. The SDN separates the control unit and the data unit, and adjusts the network operation using a centralized controller. However, this structure has also recently caused a huge amount of traffic due to the rapid spread of numerous Internet of Things (IoT) devices, which has not only slowed the transmission speed of the network but also made it difficult to ensure quality of service (QoS). Therefore, this paper proposes a method of load distribution by switching the IP and any server (processor) from the existing data processing scheduling technique, RR (Round-Robin), to mapping when a large amount of data flows in from a specific IP, that is, server overload and data loss.