• The korean journal of orthodontics
• /
• v.25 no.4
• /
• pp.447-451
• /
• 1995

The purpose of this study was to investigate the effects of cleft on mesiodistal dimensions of permanent teeth in unilateral cleft lip and palate patients. Mesiodistal dimensions of permanent teeth were measured to the nearest 0.01mm on plaster models of 50 subjects with unilateral complete cleft lip and palate, 10 siblings and 50 Controls. The results were as follows : 1. Tooth size discrepancy in the cleft group was significant in all regions except maxillary cuspid, mandibular cuspid and mandibular first premolar. 2. Some of the mesiodistal dimensions of the teeth on the cleft side were significantly smaller than those of their antimeres on the non-cleft side in the cleft group. 3. A comparison of mesiodistal dimensions of the teeth for the right and left sides of the control group showed no statisically significant differences excepts maxillary lateral incisor. 4. Asymmetries of mesiodistal dimensions of the teeth in the sibling group was not found except maxillary first molar.

• Computational Structural Engineering
• /
• v.9 no.3
• /
• pp.199-207
• /
• 1996

When an initially straight thin cylinder is bent, there is a tendency for the cross section to flatten. This phenomenon was investigated by L.G. Brazier in 1927 and is called "Brazier Effect" or "Brazier Theory". The main characteristic is the reduction of carrying capacity due to the decrease of bending stiffness by shortening of thickness with the increase of external load. And the relationship of curvature-bending moment becomes a soft spring type as shown in Fig.2. In this paper, the Brazier theory on plate type structures is investigated from the following view points : (1) What is the Brazier effect? (2) the reason of the occurrence of the Brazier effect in plate type structures by using beam model and (3) factors which cause the brazier effect.

• KSBB Journal
• /
• v.10 no.4
• /
• pp.421-427
• /
• 1995

A fungal strain, designated Aspevgillus sp. JS-42, was isolated and shown to produce an extracellular polysaccharide used as a bioflocsulant. The optimal medium composition for the production of flocculant with Aspergillus sp. JS-42 was glucose 3.0%, yeast extract 0.2%, $(NH_4)_2S0_4 0.1%, CaCI_2.2H_2 0.05%$ in distilled water. The optimum culture temperature and optimum culture pH for the production of the flocculant were $25^{\circ}C$ and pH 7.0, respectively. The highest production of flocculant was observed after 90 hours of cultivation at the optimal condition. The flocculant could efficiently flocculaled the tested solids suspended in aqueous solution and was stable at high temperature($100^{\circ}C$) and to pH range of from 2 to 10. The flocculant seems to be a kind of high viscous polysaccharide.

• Korean Journal of Construction Engineering and Management
• /
• v.8 no.3
• /
• pp.97-105
• /
• 2007

In many construction projects, such as dams, highways, airports, buildings, industrial plants, and sewerage and drainage systems earthmoving operation is defined the movements of a certain quantity of earth to alter the surface configuration or conditions so that projects requirement can be met. Accurate calculation of travel time is essential for determining productivity of earthmoving operations, and for ultimately selecting the most cost-effective fleet configuration for executing the work. Also transportation work that utilizes dump truck consists average So in the whole expenses earthmoving operation, and is an important cost factor for cost management. Therefore this study proposes a methodology for optimum transfer speen based on the analysis of factors affecting earthmoving operation in different road types by collecting the sources of dump truck running speeds and considering the main factors affecting the earthmoving operation.

• Journal of Advanced Navigation Technology
• /
• v.17 no.5
• /
• pp.484-490
• /
• 2013

With the rapid development of wireless communication at VHF and UHF bands, there is an increasing need for the reliable propagation prediction tools. Therefore, the different propagation models that have been developed in many countries as well as korea has been trying to secure a model suitable for their geographical area but then it is giving us a different result when we compared it to measured values. In this paper, based on the measurements of DTV broadcasting services in domestic urban area, analysis and comparison of ITU-R P.1546 and BCAST models provide errors between measured and predicted values, and some points for improving SMI system has been proposed. As a result, P.1546 model provides the valid predicted data similar to measured data, but BCAST model has some problems of large deviation and higher prediction to measured data. In future, these problems and diffractions due to high buildings need to be studied further.

• Korean Journal of Mineralogy and Petrology
• /
• v.33 no.4
• /
• pp.377-389
• /
• 2020

In this study, pollution characteristics were investigated for the Andong Dam sediments in the Nakdong River. Sediment samples were collected from the middle, left, and right points of the lake up to 40km upstream of the Andong Dam at intervals of about 5km by stratification and turnover period. In the case of nutrients and total organics such as loss of ignition, total nitrogen, and phosphorus, the degree of contamination is low, but heavy metals of arsenic and cadmium is very high. The contamination level of sediments in the dam area is higher than that of the branch of river and the control group, and concentration of chromium, copper, and lead are higher in the stratification period, and that of zinc is higher in turnover period. Arsenic, cadmium, manganese, and zinc showed contamination variation between upstream and downstream but chromium, copper, mercury, iron and lead didn't show the variation.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2022.05a
• /
• pp.364-364
• /
• 2022

최근 기후변화에 따른 잦은 이상 가뭄으로 물 부족 현상이 심화되고 있어 물 안보가 중요한 사회적 이슈로 부각되고 있다. 물 부족에 대비하기 위해 수자원은 인류가 마음대로 사용할 수 있는 자유재가 아니라 보호·관리하여야 하는 대상으로, 보유한 미사용량을 회수·재배분하여 물 이용의 공정성을 강화 등 물 이용 제도의 전반에 대한 검토·개선이 필요한 실정이다. 하지만 일부 유역에서는 하천수 사용량이 정확하게 계측되지 않아 공정한 하천수 배분 등에 한계가 발생하고 있다. 본 연구에서는 충주댐 하류 유역에 위치한 자동유량측정소 원주시(남한강대교)와 여주시(남한강교) 상·하류 유량자료를 검토·분석하여 하천수 사용허가권에 등재된 하천수 이용량을 검토하고자 한다. 아울러 상·하류 자동유량관측소 내 지류 하천(섬강, 청미천)이 유입되고 있어, 추가 유입량을 고려한 물수지 분석을 위해 원주시(문막교)수위관측소, 여주시(원부교)수위관측소의 유량자료를 이용하였다. 상·하류 유량자료 검토 결과, 지류 유입량 + 하류 여주시(남한강교)) 유량이 상류 원주시(남한강대교) 유량보다 작은 상·하류 유량이 역전('19~'20, 평균 787,753m³/day)되는 흐름이 발생하였다. 구간 내 등재된 취수시설물(11개소) 허가량(39.66×10⁶m³) 보다 실재 사용량은 많을 것으로 추정되며 상·하류 역전 흐름에 직접적인 영향을 준 것으로 판단된다, 또한 현장 조사에서 허가대장에 미등재된 다수의 시설을 발견하였으며 이는 하천수의 효율적인 관리에 장애요인으로 작용된다. 하천수 사용은 복합허가사항으로 홍수통제소에서 사용허가부터 관리까지 실시하고 있는데 하천수 허가 신청량은 계획수요량 산정과 물수지 분석결과를 통하여 적정성 검토가 이루어지고 있다. 그러나 하천수 사용허가량 대비 실제 하천수 취수량이 얼마나 되는지 파악은 불가능한 실정이다. 결국 하천 유량을 관리하기 위해 강수량, 수위, 유량 등 많은 수문요소를 정확하게 측정하는 것도 필요하지만 이처럼 하천수 이용을 위해 취수되는 양을 정확하게 계측하지 않는다면 효율적인 하천수 관리는 어렵다. 하천수를 관리하고 효율적으로 이용하기 위해 하천수 이용에 대한 제도적인 보완이 필요해 보인다.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2022.11a
• /
• pp.362-365
• /
• 2022

With the development of the 4th industrial revolution technology, smartization in various fields is accelerating. The shipping and logistics industry is also promoting smartization by combining advanced new technologies such as digital twin, Internet of Things, and artificial intelligence. In Korea, the Ministry of Maritime Affairs and Fisheries is promoting a strategy to spread the smart shipping logistics system in line with the changing global shipping logistics trend, and through this, it is creating a foundation for smart shipping logistics. This study aims to present the concept of a communication tool that recognizes the importance of communication between each logistics entity and exchanges opinions between logistics entities in a virtual digital twin environment to cope with the changing shipping logistics process. In addition, for the development of these communication tools, this study derive a software design model, including architecture.

• Journal of the Korean Society of Radiology
• /
• v.84 no.4
• /
• pp.846-854
• /
• 2023

Vascular injuries of the extremities are associated with a high mortality rate. Conventionally, open surgery is the treatment of choice for peripheral vascular injuries. However, rapid development of devices and techniques in recent years has significantly increased the utilization and clinical application of endovascular treatment. Endovascular options for peripheral vascular injuries include stent-graft placement and embolization. The surgical approach is difficult in cases of axillo-subclavian or iliac artery injuries, and stent-graft placement is a widely accepted alternative to open surgery. Embolization can be considered for arterial injuries associated with active bleeding, pseudoaneurysms, and arteriovenous fistula and in patients in whom embolization can be safely performed without a risk of ischemic complications in the extremities. Endovascular treatment is a minimally invasive procedure and is useful as a simultaneous diagnostic and therapeutic approach, which serve as advantages of this technique that is widely utilized for vascular injuries of the extremities.

• Journal of Korea Port Economic Association
• /
• v.28 no.1
• /
• pp.159-178
• /
• 2012

Recently, Global network expansion strategy of GTOs(Global Terminal Operator) coupled with each country's port policy, plays huge role for the evolution of modern container port. The Chinese ports can be regarded as the major markets to the GTOs. However, there are scant of researches for finding the key success factors of GTOs' strategies when they consider to invest in overseas. In this respect, the aims of this study were to draw out the evaluation variables for successful investment strategies of GTOs, and to calculate the selected target ports. The 14 variables are selected including the variable named 'development potentiality of a port' through literature reviews. Using the Factor Analysis (FA) based on selected variables, four principal factors were extracted such as 'ability for port operating and cargo generating', 'the trade route and volume', 'the calling potentiality for large vessels' and 'the possibility of utilization of existing infrastructure'. In addition, the weights of factors and variables are evaluated through Fuzzy AHP method. As a result, 'ability for port operating and cargo generating' is chosen as the most important factor among principal factors as scored 0.343, and 'the development potentiality of a port' (0.107) is represented as the most important variable among 14 detailed variables. In overall, from the Global Terminal Operator's point of view, Shanghai is ranked as most suitable port for operating new terminal among the top 5 Chinese ports.