• Journal of Ocean Engineering and Technology
• /
• v.17 no.2
• /
• pp.21-26
• /
• 2003

The reel-lay method of submarine pipelines a continuous string of pipe coiled onto a reel. Assembly of this pipe that is string is accomplished onshore by welding, and nondestructive testing is carried out prior to coiling the pipe. The total length of pipes on the reel depends on the reel and pipe diameters. Pipeline installation is accomplished by uncoiling, straightening the pipe, and laying out the pipe string onto the seabed as the barge moves forward. Installation associated with coiling and uncoiling is related to the bending moment and strain relationship of the pipeline, A highgrade pipe material is required when the reel-lay method is used. This paper is concerned with the highly plastic bending moment of the pipeline, including the effect of ovality. Moment calculation in the pipe is accomplished by the numerical method, including the variable ovalities during the plastic bending of the pipe string. The new calculation method of the high plastic bending moment was applied to the reel-lay method.

• Journal of Power System Engineering
• /
• v.10 no.3
• /
• pp.38-44
• /
• 2006

Failure assessment of steam generator tube are very important for the integrity of energy plants. In pipes of energy plants, sometimes, the local wall thinning may result from severe erosion-corrosion damage. Recently, the effects of local wall thinning on fracture strength and fracture behavior of piping system have been well studied. In this paper, the elasto-plastic analysis is performed by FE code ANSIS on steam generator tube with wall thinning. We evaluated the failure mode, fracture strength and fracture behavior from FE analysis. It was possible to predict the crack initiation point by estimating true fracture ductility under multi-axial stress conditions at the center of the thinned area.

• Proceedings of the KIEE Conference
• /
• 2007.04c
• /
• pp.49-52
• /
• 2007

본 논문에서는 FEM (Finite Element Method)을 이용한 압전세라믹의 특성해석을 통하여 잉크젯 프린트헤드를 설계, 제작하였다. 압전세라믹의 물질 특성과 잉크유체 특성을 고려한 굽힘 모드방식의 구동원리와 이론정립을 하였다. 압전방정식은 압전구조에 의한 공진주파수로 압전 파라미터를 구할 수 있고, 실험을 통하여 이러한 측정값을 얻을 수 있었다. 제작된 압전세라믹 프린트헤드의 잉크드롭 실험결과 통하여 이에 대한 특성을 알 수 있었다. 이때 잉크유체의 음파와 압전 공진주파수 범위 내에서 압전세라믹 응력(변형)의 이득을 발생할 수 있음을 제작한 128노즐의 압전세라믹 잉크젯 프린트헤드로부터 알 수 있었다.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.10 no.3
• /
• pp.68-74
• /
• 2001

In the drawing of large size automotive panels, elastic deflection of die components is induced by the contact force between them. The deflection is nonuniform and locally distributed, and results in nonuniform material flow. In order to arrange such a nonuniform die gap, a correcting operation, so called die spotting, is inevitable, which requires trial and error works and consuming time. A prediction of the bending deflection prior to a try-out must be useful to reduce the die spotting time. In this study, drawing process of a front fender is simulated first. and the deflection of the blank holder is calculated from the contact force imposing on th blank holder. The balance block heights ensuring a uniform deflection are optimized by the analysis and design of experiments.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.8
• /
• pp.2734-2740
• /
• 2010

The free in-plane vibration of asymmetric circular curved beams with varying cross-section is analyzed by the differential quadrature method (DQM) neglecting transverse shearing deformation. Natural frequencies are calculated for the beams with various opening angles and boundary conditions. Results obtained by the DQM are compared with available results by other methods in the literature. It is found that the DQM gives the good accuracy even with a small number of grid points.

• Proceedings of the Korean Society For Composite Materials Conference
• /
• 2004.10a
• /
• pp.61-64
• /
• 2004

The strength characteristics as well as deformation behaviors of honeycomb sandwich composite (HSC) structures were investigated under bending in consideration of various failure modes such as skin layer yielding, interface-delamination, core shear deformation and local buckling. Deformation behaviors of honeycomb sandwich plates were observed with various types of aluminum honeycomb core and skin layer. Their finite-element analysis simulation with a real model of honeycomb core was performed to analyze stresses and deformation behaviors of honeycomb sandwich plates. Its results were very comparable to the experimental ones. Consequently, the increase in skin layer thickness and in cell size of honeycomb core had dominant effects on the strength and deformation behaviors of honeycomb sandwich composites.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2003.06a
• /
• pp.1705-1708
• /
• 2003

The purpose of this study is to investigate the manufacturing technique on the U type Draw-Bending of inner grooved tube. This bending process make the U shape tube by Hair Pin Bending machine. The U type tube requires the quality of product that satisfy sufficient conditions for a heat exchanger. The mandrel components act the important roles that prevent wrinkles and keep the shape of cross section of bended tube at bending process. We performed the FEM simulation using LS-DYNA software and the bending test of inner groove tube and then, compared bending simulation with bending test results about mandrel ball diameter, mandrel position and optimal clearance between mandrel and tube.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2003.06a
• /
• pp.1630-1633
• /
• 2003

Hair pin bending machine is pipe forming machine consisting of heat exchanger product system. Hair pin produced by these machine is pathway of refrigerant and play a important role improving the performance and productivity of heat exchanger. The core technology of hair pin bending machine is forming the straight pipe into U-type without any defaults. Therefore, this paper study the relation between the pipe bending forming and the shape and position of mandrel using the elastic-plastic finite element analysis and provide a foundation technology for which developing the hair pin bending machine. The results are followed 1. Mandrel located in front of rotating center of bending die minimized the circular shape variation of copper pipe. 2. Diameter change of mandrel hardly effect the pipe shape.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.22 no.5
• /
• pp.453-462
• /
• 2009

The differential quadrature method(DQM) is applied to the free in-plane vibration analysis of circular curved beams with varying cross-section neglecting transverse shearing deformation. Natural frequencies are calculated for the beams with various opening angles and end conditions. Results obtained by the DQM are compared with available results by other methods in the literature. It is found that the DQM gives good accuracy even with a small number of grid points. In addition, the corrected results are given for the beams not previously presented for this problem.

• Textile Coloration and Finishing
• /
• v.10 no.4
• /
• pp.15-23
• /
• 1998

본 연구에서는 sizing을 포함하여 염색.가공 공정에서 습.건열 처리 온도를 변화시켜 처리한 폴리에스테르 필라멘트 사와 직물의 물성 변화에 관한 상관성을 연구하였다. 경사는 50d/24f(spark) 그리고 위사는 75d/72f(semi-dull)사를 사용하여 평직물을 셔틀직기에서 제직하였다. 사이징 공정에서의 건조온도를 $90^\circ{C}$, $125^\circ{C}$, $150^\circ{C}$로 변화 시켰으며 수세공정에서 습열 처리온도는 $90^\circ{C}$, $110^\circ{C}$ 그리고 $120^\circ{C}$로 변화시켰다. 그리고 프리세트 공정에서의 건열 처리온도는 $180^\circ{C}$, $200^\circ{C}$ 그리고 $220^\circ{C}$로 변화시켰다. 마지막으로 최종열처리 공정에서는 $170^\circ{C}$, $180^\circ{C}$ 그리고 $200^\circ{C}$로 각각 변화시켜 이들 직물의 인장, 굽힘, 전단 특성과 이들 직물에서 채취한 실의 탄성계수, 절단강도, 변형률 등을 측정하여 각 공정에서의 열처리 온도 변화에 따라 이들 물성치의 상관성을 검토 비교하였다.