• 한국정밀공학회지
• /
• 제22권9호
• /
• pp.162-172
• /
• 2005

The objective of this research works is to investigate into characteristics of bending stiffness and failure for the ISB ultra-lightweight panel with internally structured material. The expanded metal with a crimped pyramid shape and woven metal are employed as an internally structured material. Through three-points bending test, the force-displacement curve and failure shape are obtained to examine the deformation pattern, characteristic data, such as maximum load, displacement at maximum load, etc, and failure pattern of the ISB panel. In addition, the influence of design parameters fur ISB panel on the specific stiffness, the specific stiffness per unit width, failure mode and failure map has been found. Finally, it has been shown that ISB containing expand metal with the crimped pyramidal shape is prefer to that containing woven metal from the view point of optimal design for ISB panel.

• 한국정밀공학회지
• /
• 제22권3호
• /
• pp.162-169
• /
• 2005

The functional external fixator system fur bone deformity near joints in legs using the worm gear was developed for curing the difference angles in fracture bone and the lengthening bar for curing the difference length in fracture bone. Both experiments and FE analysis were performed to compare the elastic stiffness in several loading modes and to improve the functional external fixator system for the bone deformity. The FE model using the compressive and bending FE analysis was applied to the FE analysis due to the angle differences. The results show that the compressive stiffness value in experiment was 175.43N/mm; the bending stiffness value in experiment was 259.74N/mm; compressive stiffness value in FEM was 188.67N/mm; bending stiffness value in FEA was 285.71N/mm. The errors between experiments and FEA were less than 10%. The maximum stress (157MPa) to the angle of clamp was lower than the yield stress (176.4MPa) of SUS316L. The stiffnesses in both axial compressive and bending of the new fixator are about 2 times higher than other products except EBI (2003).

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2004년도 추계학술대회 논문집
• /
• pp.1248-1251
• /
• 2004

The functional external fixator system for bone deformity near joints in legs using the worm gear was developed for curing the difference angles in fracture bone and the lengthening bar for curing the difference length in fracture bone. Both experiments and FE analysis were performed to compare the elastic stiffness in several loading modes and to improve the functional external fixator system for bone deformity near joints in legs. The FE model using the compressive and bending FE analysis was applied the FE analysis due to the angle differences. The results show that the compressive stiffness value in experiment was 175.43N/mm, the bending stiffness value in experiment was 259.74N/mm, compressive stiffness value in FEM was 188.67N/mm, bending stiffness value in FEA was 285.71N/mm. The errors between experiments and FEA were less than 10％. The maximum stress (157MPa) to the angle of clamp was lower than the yield stress (176.4MPa) of SUS316L. The stiffnesses in both axial compressive and bending of the new fixator are about 2 times higher than other products except EBI (2003).

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2012년도 제38회 춘계학술대회논문집
• /
• pp.259-261
• /
• 2012

본 연구에서는 3점 굽힘시험 및 DMA 시험을 통해 온도환경이 에폭시 수지의 굽힘탄성계수에 미치는 영향을 조사하였다. 굽힘 시험의 온도 조건은 $30^{\circ}C$, $100^{\circ}C$, $140^{\circ}C$의 세 가지 조건을 적용하였으며 시편은 종횡비 16, 32, 40배의 세 가지 종류가 고려되었다. 연구결과에 따르면 DMA를 통한 저장탄성계수와 굽힘시험을 통해 얻은 강성은 주어진 온도조건에서 서로 유사한 경향을 보였다. 또한 종횡비가 증가함에 따라 굽힘탄성계수도 증가 하였으며, 고온환경에서는 32배 이상의 종횡비가 적합하다고 판단된다.

• 한국공작기계학회논문집
• /
• 제15권1호
• /
• pp.39-48
• /
• 2006

In this paper, polymer composites based sandwich structures like beams and plates are optimised by using parametric study. The structures are composed of fibre reinforced composites for facial material and resin concrete and PVC foam for core materials. The stacking sequences and thickness of the composites are controlled as major parameters to find out the optimal condition for machine tool components. For the plate structure of machine tool bed composites-skined sandwich structure which has several ribs are proposed to enhance bending stiffnesses in two major directions at the same time. Dynamic robustness of a machine tool structure is investigated using modal analysis. From the results optimal configuration and materials for high precesion machine tools are proposed. And the plate was made of fiber reforced composite material and PVC foam.

• 한국의류학회지
• /
• 제22권8호
• /
• pp.1079-1089
• /
• 1998

Various fabrics, including natural fibers, regenerated cellulosic fibers, synthetic fibers, blend yarn, and mixture fabrics, were treated with the solutions of high purity chitosan in 1% acetic acid, having high viscosity of 930cps or low viscosity of 8cps. Physical/ mechanical properties of the treated fabrics samples were measured using Kawabata Evaluation System and drape tester. From these, hand values and total hand values of the fabric samples were calculated using Kawabata-Niwa translation equations. KOSHI, SHARI, HARI values have increased for the treated samples, while FUKURAMI values have decreased in general.

• 한국소음진동공학회논문집
• /
• 제16권9호
• /
• pp.912-918
• /
• 2006

A modeling method for the vibration analysis of rotating multi-blade systems considering the coupling stiffness effect is presented in this paper. Blades are assumed as cantilever beams and the coupling stiffness effect originates from disc or shroud between blades. As the angular speed, hub radius ratio, and the coupling stiffness vary, the natural frequencies of the system vary. Numerical results show that the coupling stiffness is very important to estimate the natural frequencies. Along with the natural frequencies, associated mode shapes, critical angular speed, and critical hub radius ratio are obtained through the analysis.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2006년도 춘계학술대회논문집
• /
• pp.1354-1359
• /
• 2006

A modeling method for the vibration analysis of rotating multi-blade systems considering the coupling stiffness effect is presented in this paper. Blades are assumed as cantilever beams and the coupling stiffness effect originates from disc or shroud between blades. As the angular speed, hub radius ratio, and the coupling stiffness vary, the natural frequencies of the system vary. Numerical results show that the coupling stiffness is very important to estimate the natural frequencies. Along with the natural frequencies, associated mode shapes, critical angular speed, and critical hub radius ratio are obtained through the analysis.

• 수산해양기술연구
• /
• 제38권2호
• /
• pp.101-109
• /
• 2002

본 논문에서 알루미늄 하니콤 샌드위치판 구조(AHSP)의 특성에 대해 해석한 결과는 다음과 같다. 1) AHSP의 H/T비가 낮아질수록 응력이 감소하며, 셀 크기(H)보다는 코어의 두께(T)가 두꺼워질수록 강도와 강성이 증가함을 알 수 있다. 2) AHSP 구조가 동일한 질량에서부터 증가하면서 EASP 구조에 비해 2.5～6.0배 정도의 높은 강도를 보이는 것을 알 수 있다. 3) AHSP의 면재의 두께변화는 AHSP 전체의 강성에 별로 영향을 미치지 못했으나, 심재의 두께가 증가할수록 단면 2차 모멘트의 값이 커지기 때문에 AHSP의 강성이 매우 커짐을 알 수 있다. 4) EASP보다 강성이 큰 AHSP의 고유진동수가 크며, 진동 모드 사이의 차도 커짐을 알 수 있다. 5) 비교연구 결과 AHSP 구조가 EASP 구조보다 적은 질량으로 훨씬 더 높은 강성을 갖는, AHSP 구조의 우수성이 입증된다. 따라서 중량경감이 가장 중요한 문제 중의 하나인 초고속선 및 대형선의 경우 AHSP 구조가 높은 굽힘강성을 갖고 다른 재료에 비해 상대적으로 적은 중량이 필요하므로 구조 재료로서의 적합성을 알 수 있다.

• 대한기계학회논문집A
• /
• 제37권5호
• /
• pp.641-648
• /
• 2013

보 구조물들은 보다 우수한 성능을 위하여 다양한 형태의 보강재 또는 단면 형상을 가지게 된다. 강성재단을 설계에 적용하기 위해서는 강성재단에 의해서 발생하는 연계 거동을 정확하게 예측하는 것이 필요하다. 본 연구에서는 문헌에서 보고된 복합재료 보의 특이한 연계거동(면외 굽힘-전단 연계)을 실험적으로 확인하기 위하여, 등가의 동적 연계거동을 나타내는 강성재단 된 등방성 박스보를 제작하였다. 제작된 시편의 주파수 및 모드 형상 등의 동적 특성을 3 차원 유한요소해석과 비교 검토하여, 문헌에 보고된 특이한 전단 연계 거동이 발생함을 확인하였다. 이러한 거동은 보강재의 적절한 배치를 통해 원하는 방향으로 강성재단 될 수 있고, 얻어진 연계 거동은 다양한 분야에 응용될 수 있다.