• Proceedings of the Materials Research Society of Korea Conference
• /
• 2009.05a
• /
• pp.21.2-21.2
• /
• 2009

발광다이오드는 에너지 변환 효율이 높고 친환경적인 장점으로 인하여 차세대 조명용 광원으로 각광받고 있다. 하지만 현재 발광다이오드는 낮은 광추출효율로 인하여 미래의 수요를 충족시킬 수 있을 만큼 충분한 성능의 효율을 나타내지 못하고 있다. 발광다이오드의 낮은 광추출효율은 반도체소재와 외부 공기와의 큰 굴절률 차이로 인하여 발생하는 전반사 현상에 기인한 것으로 이 문제를 해결하기 위하여 발광다이오드 소자의 발광면 및 기판을 텍스처링하는 방법이 중요하게 인식되고 있다. 하지만 현재까지 패턴의 구조에 따른 광추출 특성을 분석한 연구는 미진한 상황이다. 본 연구에서는 임프린팅 및 건식식각 공정을 이용하여 다양한 구조의 나노 및 micron 급 패턴을 발광다이오드의 p-GaN층에 형성하였다. 발광다이오드 기판 위에 하드마스크로 사용하기 위한 SiO2를 50nm 증착한 후 그 위에 UV 임프린팅 공정을 진행하여 폴리머 패턴을 형성시켰다. 임프린팅 공정으로 형성된 폴리머 패턴을 CF4CHF3 플라즈마를 이용하여 SiO2를 건식식각하였고, 이후에 SiCl4와 Ar 플라즈마를 이용한 ICP 식각 공정을 진행하여 p-GaN층을 100nm 식각하였다. 마지막으로 BOE를 이용한 습식식각 공정으로 p-GaN층에 남아있는 SiO2층을 제거하여 p-GaN층에 sub-micron에서 micron급의 홀 패턴을 형성하였다. Photoluminescence(PL) 측정을 통해서 발광다이오드 소자에 형성된 패턴의 구조에 따른 광추출 특성을 분석하였다.

• Korean Journal of Optics and Photonics
• /
• v.9 no.4
• /
• pp.215-220
• /
• 1998

We proposed an in situ measurement set-up and technique to measure the various electro-optic(E-O) properties of the E-O polymer. Using the proposed measurement set-up, the electro-optic effect and birefringence of unpoled side-chain E-O polymer induced by the strong dc and ac electric field were observed. The dependence of the E-O coefficients on the various poling conditions were measured with real time. To evaluate the thermal stability of the poled polymer the relaxation of the E-O effect was measured and the result was compared with well known polymer materials. The proposed measurement reduces the number of experimental steps and saves measurement time.

• KSBB Journal
• /
• v.7 no.2
• /
• pp.118-125
• /
• 1992

Most of cosmetics are emulsion-type products which contain the sources of nutrition, i.e., vegetable oil, mineral oil and carbohyrate etc.. These additives are usually very susceptible to the contamination by microorganisms. The purpose of this study is to obtain the data necessary not only to prevent dermalopathia occurred by microbials but also to maintain the quality. In this experiment we observed the growth of P.aeruginosa in the cosmetics with or without antiseptics so as to prevent contamination. During the contamination period, the phase became unstable and creaming phenomina was happened together with some discoloration and bad smell. The pH of cosmetic was decreased from 7.6 to 6.0 and the concentration was increased from 1.443 to 1.453 in terms of refractive index during 40 days incubation. By adding antiseptics to the cosmetics, the number of P. aeruginosa from the challenge test method were decreased from $10^8$ cell/ml to $5{\times}10^3$ cell/ml. For the antibacterial effect against P. aeruginosa, p-hydroxy benzoic acid propyl ester in phosphoric acid buffer solution showed the best result.

• Fire Science and Engineering
• /
• v.29 no.3
• /
• pp.59-64
• /
• 2015

This study analyzed results of the causes of failure in 1,022 fire trucks currently being used in South Korea (aerial ladder, aerial platform, pumper, and chemical fire trucks). The results show that 46% of aerial ladder trucks have defective in the elevator brake systems, 29% of aerial platform trucks have contamination in the hydraulic oil, 37% of pumpers have defective in the pneumatic cylinders of the air supply system, and 39% of chemical fire trucks have defective in the powder fire extinguishing systems. The principal reasons for malfunctions are deterioration of the apparatuses, and accumulated fatigue from repetitive use of certain components, such as pneumatic cylinders in the air supply system and wire rope jamming in rollers in the ladder apparatus. These manufacturing defects should be improved upon in the manufacturing process. As a result, the fire trucks, which are used for 5 years or more, need precise inspections in accordance with the Regulation on Fire Apparatus Maintenance. Fire apparatuses have a service life of 10 to 12 years or more. They need to be replaced or require life extension, and they should be kept in top shape with the best maintenance for public safety.

• Journal of the Mineralogical Society of Korea
• /
• v.21 no.2
• /
• pp.177-182
• /
• 2008

The Gemological characteristics of B.C. jade from Cassiar Mine, British Colombia, Canada, have been investigated, using polarizing microscopy, Mohs' hardness, refractive index and density measurements, X-ray powder diffraction, X-ray fluorescence spectrometry, ICP-MS, Infrared absorption spectrometry, and DTA/TGA. The B.C. jade is deeply green (spinach peen or olive green) in color and is translucent. It shows a resinous or waxy luster. The principal mineral of the material is tremolite-actinolite solid solution and minor amount of Cr-garnet and unidentified opaque minerals are accompanied. Mohs' hardness value ($5.5{\sim}6$). refractive index (1.62), and specific gravity (3.01) are measured. It is very highly tough and shows hackly fracture. The high Fe content ($Fe_2O_3\;4.14{\sim}4.66\;wt%$) in B.C. jade is attributable to a deepening of green color of the material. The B.C. jade starts to dehydrate at v and dehydration is completed at $1000.8^{\circ}C$, transforming tremolite-actinolite solid solution to enstatite, diopside, quartz, and water in its place. This possible reaction is supported by the weight loss of B.C. jade (1.93 wt%) at $1000.8^{\circ}C$ indicated by TGA curve.

• Korean Journal of Optics and Photonics
• /
• v.14 no.5
• /
• pp.545-554
• /
• 2003

Design of the optical modulator composed of a three-waveguide coupler and CPW traveling-wave electrodes was carried out. Switching phenomena of three-waveguide couplers were analyzed by using the coupled mode theory, and the coupling-lengths of the devices were calculated by means of the FDM. CPW traveling-wave electrodes were analysed by the CMM and SOR simulation technique in order to find the conditions of phase-velocity and impedance matching. Traveling-wave modulators were fabricated on z-cut LiNbO$_3$ substrate. Ti was in-diffused in LiNbO$_3$ to make waveguides and Au electrodes were built on the waveguides by the electrolyte technique. The fabricated modulator chip was end-polished, pig-tailed and packaged in a brass mount with K-connector. The insertion loss and the switching voltage of the optical modulator were about 4㏈ and 19V, respectively. Network analyzer was used to obtain the S parameter and the corresponding RF response. From the measurement, parameters of the traveling-wave electrodes were extracted to be Z$_{c}$= 45 Ω, N$_{eff}$=2.20, and $\alpha$$_{0}$=0.055/cm√GHZ. The measured optical response R($\omega$) was compared with the theoretically estimated one, showing both responses agree well. The measurement results revealed that 3㏈ bandwidth turned out to be about 13 GHz.

• Journal of the Korean earth science society
• /
• v.41 no.5
• /
• pp.478-489
• /
• 2020

This study presents an analysis of infrasonic signals from two accidental explosions in Gwangyang city, Jeonnam Province, Korea, on December 24, 2019, recorded at 12 infrasound stations located 151-435 km away. Infrasound propagation refracted at an altitude of ~40 km owing to higher stratospheric wind in the NNW direction, resulting in favorable detection at stations in that direction. However, tropospheric phases were observed at stations located in the NE and E directions from the explosion site because of the strong west wind jet formed at ~10 km. The transmission losses on the propagation path were calculated using the effective sound velocity structure and parabolic equation modeling. Based on the losses, the observed signal amplitudes were corrected, and overpressures were estimated at the reference distance. From the overpressures, the source energy was evaluated through the overpressure-explosive charge relationship. The two explosions were found to have energies equivalent to 14 and 65 kg TNT, respectively. At the first explosion, a flying fragment forced by an explosive shock wave was observed in the air. The energy causing the flying fragment was estimated to be equivalent to 49 kg or less of TNT, obtained from the relationship between the fragment motion and overpressure. Our infrasound propagation modeling is available to constrain the source energy for remote explosions. To enhance the confidence in energy estimations, further studies are required to reflect the uncertainty of the atmospheric structure models on the estimations and to verify the relationships by various ground truth explosions.

• Korean Journal of Clinical Laboratory Science
• /
• v.52 no.1
• /
• pp.1-17
• /
• 2020

Three-dimensional microscopic approaches in histopathology display multiplex properties that present puzzling questions for specimens as related to their comprehensive volumetric information. This information includes spatial distribution of molecules, three-dimensional co-localization, structural formation and whole data set that cannot be determined by two-dimensional section slides due to the inevitable loss of spatial information. Advancement of optical instruments such as two-photon microscopy and high performance objectives with motorized correction collars have narrowed the gap between optical theories and the actual reality of deep tissue imaging. However, the benefits gained by a prolonged working distance, two-photon laser and optimized beam alignment are inevitably diminished because of the light scattering phenomenon that is deeply related to the refractive index mismatch between each cellular component and the surrounding medium. From the first approaches with simple crude refractive index matching techniques to the recent cutting-edge integrated tissue clearing methods, an achievement of transparency without morphological denaturation and eradication of natural and fixation-induced nonspecific autofluorescence out of real signal are key factors to determine the perfection of tissue clearing and the immunofluorescent staining for high contrast images. When performing integrated laboratory workflow of tissue for processing frozen and formalin-fixed tissues, clear lipid-exchanged acrylamide-hybridized rigid imaging/immunostaining/in situ hybridization-compatible tissue hydrogel (CLARITY), an equipment-based tissue clearing method, is compatible with routine procedures in a histopathology laboratory.

• Korean Journal of Crystallography
• /
• v.4 no.2
• /
• pp.74-85
• /
• 1993

Single crystals of LiNbO3 have found extensive application in electro-optic and nonlinear optic devices. However, laser-induced refartive index inhomogeneities, which have been labeled opical damage impose limits on device optical damage in LiNbO3 is imporved if more than 4.5 rml% MgO is added to the melt The laser damage thrueshold increased as much as 100 times better then that of undoped crystals. The MgO doped cystal has thus been urterlsiv81y studied since then. In the study, Mgo:LiNbOs(MLA) single crystals dopsd with 0, 2.5, 5.0, 7.5, 10.0 mol% MgO have been grown by the czocrualski technique. The metls were prepared in the platinum crluible and 15∼20mm diameter crystals were grown with a length of 20∼30mm in a resitance heater. The growth rate was 2.5mm/hr, the rotation speed 15rpn. Before sawing MLN single crystals were annealed for 24 hours under atmosphere at a temperature of 1080℃. After sawing, we have found an annual ring cross section of MNA crystals only in the direction of perpendicilar to the c-axis. Nonuniform dispusion of MgO was pointed out that the cuties of the state of oxide were strongly affected by oxygen partial pressure in.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.5
• /
• pp.612-618
• /
• 2016

The aim of this study is to investigate the effects of stray light originating from the blue-light blocking lens on the quality of the image. After designing the ideal spectacle lens, anti-reflection spectacle lens without internal reflection, anti-reflection spectacle lens with internal reflection, and blue-light blocking lens with internal reflection, the light intensity distribution and stray light distribution were derived. The designed spectacle lenses are meniscus lenses with a refractive power of 0.00 D, refractive index of 1.56, and a radius of 155.15 mm. The peaks of reflectance of the 4 types of blue-light blocking lenses are in the range between 430 nm and 440 nm, and their reflectances are 5%, 10%, 15%, and 20%, respectively. According to the analysis results, as the reflectance of the blue-light blocking lens increases, the light intensity in the center of the lens decreases and the intensity of the stray light in the center-periphery and periphery of the lens increases. This trend appeared to intensify with increasing reflectance of the blue-light blocking lenses. Because the increase in the reflectance of the blue-light blocking lens degrades the quality of the image by increasing the intensity of the stray light in the center-periphery and periphery of the lens, its reflectance needs to be adjusted by varying the blue-light blocking ratio and the luminous transmittance, in order to diminish the level of visual discomfort.