• Journal of Korean Ophthalmic Optics Society
• /
• v.18 no.4
• /
• pp.457-463
• /
• 2013

To determine the impact of artificial tears which include carboxymethyl cellulose on a hydrogel contact lenses. Methods: A contact lenses made of the cross-linking agent, EGDMA (ethylene glycol dimethacrylate) and HEMA (2-hydroxyethyl methacrylate) and with added NVP (n-vinyl-2-pyrrolidone) and MMA (methyl methacrylate) was evaluated for water content, refractive index, spectral transmittance and contact angle of produced contact lens. Results: The physical properties of the sampled copolymerized polymers showed that water content, refractive index, visible ray transmittance and contact angle were in the range of 26.61%~48.58%, 1.422~1.455, 80.8%~91.4% and $33.93^{\circ}{\sim}65.70^{\circ}$, respectively. In addition, after soaking with artificial tears, the water content, refractive index and contact angle were in the range of 24.46%~48.25%, 1.422~1.457, 77.0%~91.0% and $37.25^{\circ}{\sim}77.33^{\circ}$, respectively. The changes of the physical property depending on hydration time and showed an increase of refractive index and contact angle, decrease of water content and visible ray transmittance. Conclusions: Artificial tears which include carboxymethyl cellulose sodium which is used as a wetting agent influenced water content, refractive index, contact angle and spectral transmittance of a hydrogel contact lenses.

• Electrical & Electronic Materials
• /
• v.2 no.1
• /
• pp.25-32
• /
• 1989

Silicon Nitride, Silicon OxyNitride, Silicon Oxide film을 RF Sputter법으로 제작하였다. RF power 1kw에서 산소 공급량과 기관온도에 따라 제작된 막의 조성을 ESCA로 분석하였으며 산소 공급량과 기판온도의 증가에 따라 막에서의 산소함량이 크게 증가하였다. 또한 막의 밀도, 굴절율, 유전율은 산소함량의 증가에 따라 감소하였고 분극율은 Clausius-Mossotti방정식에서 얻을 수 있었다.

• Journal of the Korean Chemical Society
• /
• v.57 no.2
• /
• pp.300-305
• /
• 2013

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.19 no.5
• /
• pp.5-11
• /
• 1982

The dielectric slab waveguide is fabricated on the slide glass or oxidized silicon wafer, by spin coating polyurethane, epoxy or photoresist, and the phenomenon of dielectric waveguiding is oboerved. Using the fact that the refractive index of K.P.R. is larger than that of polyurethane, thin film prism with two layered structure is fabricated, and the refraction of light is observed.

• Korean Journal of Optics and Photonics
• /
• v.7 no.3
• /
• pp.260-265
• /
• 1996

In this paper, we studied effects of active-passive interface on the tuning characteristics of a multielectrode DBR laser. An abrupt interface distorts the threshold gain and the phase change in a multielectrode DBR laser, which results in narrowing of the continuous tuning range. On other hand, an interface with the gradual index change gives tuning characteristics which is very similar to that obtained by ignoring the interface.

• Proceedings of the Optical Society of Korea Conference
• /
• 2003.02a
• /
• pp.154-155
• /
• 2003

반도체 소자에 있어서 굴절율의 변화는 중요한 역할을 한다. 굴절율을 변화시키는 다양한 요소들은, 전계에 의한 1차 전기광학(linear electro-optic： LEO) 효과와 2차 전기광학 (quadratic electro-optic： QEO) 효과, 자유 운반자에 의한 밴드천이(band-gap shift： BS) 효과와 플라즈마(plasma： PL) 효과 등으로 잘 알려져 있다. 본 논문에서는, 오로지 TE 모드에 대해서만 선택적으로 위상 변화를 주는 P-I-i-I-N GaAs／Al／sub0.35／Ga／sub 0.65／As 도파로 위상변조기를 보고한다. (중략)

• Journal of the Korean Ceramic Society
• /
• v.41 no.10 s.269
• /
• pp.766-770
• /
• 2004

High-transmittance film was coated by using spherical silica nano colloids. Silica colloid sol was preservred between two inclined slide glasses by capillary force, and particles were stacked to form a film onto the substrate as the upper glass was sliding. As the sliding speed increased, the thickness of the film decreased and light transmittance varied. The microstructure observed by SEM showed that silica particles were nearly close packed, which enabled the calculation of the effective refractive index of the film. The film thickness calculated from the wavelength of maximum transmittance and the effective refractive index was well coincided with the thickness observed by SEM and measured by profiler. The maximum transmittance of $94.7\%$ was obtained. This means that $97.4\%$ of transmittance or $1.3\%$ of reflectance can be achieved by simple process if both sides of the substrate are coated.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 1996.11a
• /
• pp.140-140
• /
• 1996

• Proceedings of the Optical Society of Korea Conference
• /
• 1996.09a
• /
• pp.3-3
• /
• 1996

• Proceedings of the Optical Society of Korea Conference
• /
• 1996.09a
• /
• pp.4-4
• /
• 1996