• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1994.04a
• /
• pp.88-93
• /
• 1994

본 연구에서는 배기계의 진동해석과 관련하여, 배기계 파이프에 대한 보 모델링기법을 제안하였다. 굴곡부가 통상의 직석보로 모델링될 때는 실제보다 고유진동수가 상당히 높게 평가되므로, 이 굴곡부의 강성을 적절히 수정해 주어야만 한다. 따라서 본 논문에서는 정적 변형에너지개념을 이용하여 실제 엔지니어들이 사용할 수 있을 정도로 간단하면서도, 합리적인 기법을 제시하였다. 실제 배기계의 중앙파이프의 진동해석에 적용해 본 결과 이 기법의 타당성과 효율성을 입증할 수 있었다.

• Composites Research
• /
• v.34 no.2
• /
• pp.123-128
• /
• 2021

This paper dealt with multi-scale natural frequency characteristics of wavy CNT (carbon nanotube) reinforced composites by applying the Mori-Tanaka method, rule of mixture, and Halpin-Tsai equation. By compelling benefit of an ad-hoc Eshelby tensor, the load-transfer characteristics of CNT with a waviness implanted in the polymer matrix was determined. The numerical results obtained are in good agreement with those reported by other investigators. Furthermore, the new results reported in this paper show the interactions between CNT weight, waviness ratios and layup sequences of laminated composites. Key observation points are discussed and significant considerations are given in practical designing of CNT reinforced composites.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.21 no.3
• /
• pp.258-263
• /
• 2011

The direction of the cutting tool plays a critical role in elliptical vibration cutting(EVC) where the cutting tool cuts workpiece in a trochoidal motion. In this study, EVC cutting device was developed using two parallel piezoelectric materials and it was observed that the rotation direction of the tool reverses as the EVC device undergoes resonance at which either flexural(cutting direction) or longitudinal( thrust direction) mode shapes occurs. To analytically explain reversal of the rotation direction, kinematic motion analysis of the tool was modified to incorporate amplification of the vibration amplitude and phase introduced by resonance. It successfully demonstrated, through Matlab simulation, reversal of the rotation direction of the cutting tool as the excitation frequency increases beyond resonance frequencies at which either flexural or longitudinal vibration occurs.

• Proceedings of the Korean Institute of Industrial Safety Conference
• /
• 1997.11a
• /
• pp.251-257
• /
• 1997

압전 바이몰프형 엑츄에이터에 진동판을 부착한 압전팬은 압전 바이몰프의 굴곡진동을 이용한 요동식 팬으로, 코일식 모타 팬에 비해 구조 및 풍량의 조절이 간단하고 미소량의 풍량 (1m/s)을 일으킬 수 있다. 또한 전자적인 잡음이 발생치 않는다. 수명이 재래 전자팬은5,000-10,000시간인데 비해 약 25,000시간으로 길며 압전체이기 때문에 대응한 전자석 로타리 팬 전력의 1/15mw이하의 저 소비전력을 갖는등의 잇점을 가지고 있다. (중략)

• Journal of KSNVE
• /
• v.7 no.3
• /
• pp.511-519
• /
• 1997

For a number of years it has been known that flexural vibration in a beam and plate can be damped by the application of layer of damping (viscoelastic) material that is in turn constrained by a backing layer or foil. In this study, a quantitative analysis of damping of the sandwich beam has been performed by using impact test. The damping is characterized by the loss factor .etha. in which the damping is normalized by imaginary part of the complex bending stiffiness of the beam. Results show that the relative thickness of the sandwich beam gives more effect on the riatural-frequencies and loss factor than the variation of width does. It is also shown that the Ross-Kerwin-Ungar equation and impact test can be effectively used to identify the damping characteristic of the sandwich beam and viscoelastic material.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2007.11a
• /
• pp.300-300
• /
• 2007

최근 전기전자기기 및 광학기기 등의 소형화 및 고기능에 맞추어 구동 장치의 소형화가 필수적으로 요구됨에 따라, 보다 간단한 구조의 다양한 소형 압전 선형 모터에 대한 개발이 활발히 진행되고 있다. 본 연구에서는 굴곡 진동 모드를 갖는 평판형의 압전체와 탄성체로 구성된 압전 트랜스듀서와 두 개의 압전 트랜스듀서를 연결하여 타원 운동을 구현하기 위해, 굴곡 변형이 발생하는 한 쌍의 압전 트랜스듀서에 $90^{\circ}$ 위상차를 갖는 정현파를 각각 인가하여, 한 쌍의 압전 트랜스듀서를 연결하는 돌출부에서 타원궤적을 형성하는 소형 압전 액츄에이터를 설계하였다. 유한요소해석 프로그램인 ATILA를 이용하여 결합부의 타원 궤적의 형성하기 위한 압전 트랜스듀서의 최적 동작 주파수로 운동 모드를 결정하고자 한다.

• The Journal of the Acoustical Society of Korea
• /
• v.19 no.5
• /
• pp.35-40
• /
• 2000

In this paper, the relation between the radiated sound and the vibration due to piezoelectric ESWL(Extracorporeal Shock Wave Lithotripter) is examined and the results of the experiments are represented. Next, the relation between the focal point and the vibration of the objects is examined. The same experiments with the objects that can be broken are done and the relation between the vibration and the break efficiency of the phantom is experimentally investigated. These results show that the relativity between the power of the peak frequency and the break efficiency can be confirmed.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2009.06a
• /
• pp.737-738
• /
• 2009

• Proceedings of the KIEE Conference
• /
• 1990.07a
• /
• pp.361-362
• /
• 1990

• The Journal of the Convergence on Culture Technology
• /
• v.1 no.2
• /
• pp.77-83
• /
• 2015

The purpose of this study is to prove the increase of range of motion of shoulder joint in the patients with shoulder adhesive capsulitis by applying the vibratory stimulation. In terms of subjects of the study, the experimental group 15(4 male, 11 female)and the control group 15(5 male, 10 female) were divided. The measurement of the shoulder range of motion was taken by measuring the degrees of flexion, abduction, and external rotation with a goniometer from pre treatment to one to four weeks. The results were as follows : In the experimental group and control group, there was the statistical significance in the range of motion of the shoulder flexion, abduction, and external rotation during four weeks. In summary, the vibratory stimulation are effective interventions for improving shoulder adhesive capsulitis, patient's range of motion of shoulder joint.