• Journal of Korea Port Economic Association
• /
• v.34 no.3
• /
• pp.113-132
• /
• 2018

Mokpo port marked the $131^{st}$ anniversary of its opening in 2018. while the Mokpo has taken the new port development initiatives, it is limited by inefficient port functioning due to the lack of maritime port policy and government investment. Hence, port logistics has not been activated. Additionally, studies on Mokpo port have not been conducted, and knowledge available on the port is declarative in nature. On the other hand, research on port competitiveness focuses on how to analyze the factors that determine port competitiveness. Therefore, this study was intended to expand the existing research on Mokpo port and conduct an analysis of non-competitiveness factors and suggested improvements by considering the operational aspect of Mokpo port. In this regard the importance of non-competitiveness factors was assessed through an analytic hierarchy process(AHP) analysis and the influence of the non-competitiveness factors was analyzed through an fuzzy structural modeling(FSM) analysis. The result of the AHP analysis show ed the important non-competitiveness factors included the deactivation of industrial complexes around Mokpo port, the number of liner route, the cost of the pilot and tug. Accor ding to the FSM analysis, the top level included the non-competitive factors at Mokpo port; the intermediate level included the number of liner routes, cost of pilot and tug, enrance and clearance fee, costs of inland transportation, fee for port facilities, and loading and unloading costs; and the bottom level comprised the most non-competitive factors including the deactivation of industrial complexes around Mokpo port, hinterland connectivity, access to international port, incentives, and cost of transportation and storage. Based on the results of analysis, improvements were suggested for non-competitive factors of Mokpo.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.10
• /
• pp.270-276
• /
• 2019

According to the International Maritime Organization (IMO) 2020 Regulation, ships operating outside designated emission control areas (ECA) have to use low-sulfur oil with a sulfur content of 0.5% or less by January 2020. To minimize the consumption of high-priced low-sulfur oil, it is urgent to introduce efficient energy-saving devices (ESD), and contra-rotating propeller (CRP) systems are well known to be the most effective one. The shafting system that drives a CRP is composed of an inner shaft and an outer one and has a mutually influential system that is much more complex and heavier than a general shafting system. An initial design was carried out to install a CRP system for the first time in Korea. The purpose of this study is to verify whether the journal bearing meets the classification's design criteria through a bearing reaction force analysis for the classification's approval of the initial design. It is ideal for the thrust of the propeller to act on the center of the shaft, but thrust eccentricity occurs due to the uneven wake caused by the stern shape. Load conditions were applied while considering thrust eccentricity to perform the shaft analysis, and the results were compared with the classification's criteria.

• Journal of Navigation and Port Research
• /
• v.45 no.3
• /
• pp.138-147
• /
• 2021

The need for analysis of the operational efficiency and productivity of the Busan Port Container Terminal is increasing because of the Hanjin Shipping's bankruptcy and the re-establishment of the Maritime Alliance. This paper analyzes the efficiency and productivity of five Busan New Port Container Terminal companies by using the DEA analysis and Malmquist productivity index model based on the port construction disclosure data and the collected terminal internal data. According to the analysis, the average efficiency of the five container terminals increased in 2018 but declined slightly in 2019, and the Malmquist index showed that all terminals except A have advanced productivity. Additionally, relative to facility productivity, operators at the North Container Terminal had higher facility productivity than operators at the Busan New Port Nam Container Terminal, and regarding capital productivity, the D terminal ported by HMM, a national shipping company, was the highest in facility productivity. Regarding labor productivity, the C terminal showed the highest productivity, and regarding ship work productivity, the A terminal showed the highest productivity.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.22 no.2
• /
• pp.50-64
• /
• 2019

According to the Maritime Safety Act, there are all 34 routes including 5 traffic safety zones, 3 traffic separation schemes, 26 routes designated by regional maritime affairs departments in the Republic of Korea. In the SOLAS convention, the route information should be is effectively used for the safe navigation. However, the route information is complicatedly composed of the location of the route, the navigation rule by each route, the restriction of the navigation, and the anchorages. Moreover, the present method of providing information using the navigational chart and other publications is not effective for users to grasp the navigational information. Therefore, it was conducted to study the design of the S-100 based routing information data model developed by the International Hydrographic Organization to find ways to more effectively provide route information. To do this, the analysis of route requirement, selection of items, encoding test and users' review were carried out. Through expert user review, it was evaluated that the study on the design of the route information data model can be utilized as a good basic data for the route information integration service. Future research on the development of route information data models is expected to provide integrated route information services.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.25 no.11
• /
• pp.1588-1595
• /
• 2021

Android-based smartphones receive the global navigation satellite system (GNSS) signals to determine their location and provide the GNSS raw measurement to users. The available GNSS signals on the current Android devices are GPS, GLONASS, Galileo, BeiDou, QZSS. This research has analyzed the performance of multi-GNSS position accuracy based on the pseudorange of the smartphone for maritime users. Smartphones capable of receiving dual-frequency are installed on a ship, and multi-GNSS raw information in maritime environment was measured to present the results of comparing the GNSS pseudorange-based dual-frequency positioning performance for each smarphone. Furthermore, we analyzed whether the results of the positioning performance can meet the HEA requirement of IMO for maritime navigation users. As the results of maritime experiment, it was confirmed that in the case of the smartphones supporting the dual-frequency, the position accuracy within 6 meters (95%) could be obtained, and the HEA position accuracy performance within 10 meters (95%) required by IMO could be achieved.

• The Journal of the Convergence on Culture Technology
• /
• v.7 no.4
• /
• pp.879-892
• /
• 2021

In a make-to-order manufacturing environment, the manufacturer's quotation information is important information used as basic information for bidding, receiving orders, and producing products in response to various customer demands. This quotation information is changed according to various factors such as customer demands, changes in product production environment, changes in drawing information of technical partners, and technological improvement of products. Due to this change, various changes occur in the quotation information that the manufacturer is preparing to reflect the customer's requirements. The change of quotation information according to these various change factors puts a lot of burden on the quotation management work from the standpoint of a make-to-order manufacturing company. In particular, the change of quotation information due to the change factors of quotation is inevitable and frequently occurs due to the requirements of the customer in the customer-oriented make-to-order production environment. In this paper, we propose a quotation change process based on the quotation creation process and propose a consistent and efficient quotation change processing method. To this end, the factors causing the change of quotation were defined, and the types of changes for each factor were defined. And it shows the procedure of applying the quotation change process to the quotation management system through the cases of each cause of the quotation change. In addition, in order to show the usefulness of the quotation change factors, the type of quotation change, the quotation change process, and the quotation system management, the proposed quotation change process and function was applied in the integrated quotation management system for the ship engine division of a typical make-to-order manufacturing company 'H'. As a result, it was confirmed that the proposed quotation change process and management system according to the quotation change factors were efficiently performed.

• Journal of Korea Port Economic Association
• /
• v.38 no.3
• /
• pp.15-28
• /
• 2022

Bunkering refers to the supply of bunker fuel necessary for the ship operation, as well as minimizing the price and supply cost of fuel itself, and includes supplying good quality fuel oil in a timely manner and at the optimal port. Bunkering is an important criterion in terms of cost for shipping companies because bunkering involves a significant cost to the purchaser of bunkering from the time of initial purchase. This study aims to prioritize selection criteria for tramper companies to call port for bunkering. For this study, the variables were selected by analyzing the common criteria such as price, location, bunker quality and service and infrastructure etc. employed in previous studies. The AHP method was employed to prioritize the criteria in order. As a result of the analysis, the high level factors appeared in the order of price, location, bunkering quality and port service and infrastructure factors. The importance of price criterion and location criterion was found to be high. In the low level criterion of price, the bunker price per MT was ranked first in importance. In terms of location criteria, the location on the main trade route was high. In the low criteria of bunker quality and port service, the bunkering available types and bunker quality were found to be important factors, and in the low level criteria of infrastructure, anchorage and availability of bunkering during loading and discharging and port security factors were found to be important criteria. This study provides the guidelines for research designed to compare the bunkering port selection factors and to derive their importance suggesting the ways to enhance competitiveness as a bunkering port.

• Journal of Korean Port Research
• /
• v.11 no.1
• /
• pp.1-11
• /
• 1997

The conventional methods of container forecasting is done through regression methods based on GNP growth trends and by other forecasting methods proposed by several authors. However these efforts prove to be inadequate with visible weakness and a more reasonable approach need to be determined. The succeeding sections elaborate the methodology and approach adopted. The results are then compared through a case study involving the forecast figures derived by the Pusan Port Authority and the values obtained by MRCS model introduced in this paper.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.29 no.4
• /
• pp.372-379
• /
• 2023

International oil prices are expected to increase from $85 a barrel this year to up to $100 a barrel in the second half of the year; this is likely to increase orders for offshore plants in the global market. One main characteristic of offshore plants is that a large helideck is located on the top side, and aluminum alloys are used as the basic material of the structure for weight reduction and corrosion resistance. Shipowners are increasing the size of helicopters to quickly evacuate lives in the event of an emergency, and the safety use load of devices that can stably secure helicopters to the deck is also required to increase. Owing to the nature of the aluminum material, the structural strength caused by welding is greatly reduced; therefore, the fixing device must be designed by embedding it in the deck and fixing it with bolts. In this study, a model applying aluminum alloy 6082-T6 was developed to develop a helicopter fastening device that can be used for large helidecks (diameter = 28 m). The developed item was verified through nonlinear structural strength calculation to satisfy the load used for the actual fastening condition. The load condition with a 45° showed a lower ultimate strength than the 90° case owing to local plastic collapse. The nonlinear structural collapse behavior showed a result similar to that of the experimental test. The main contents derived from this study are considered to be reference materials when evaluating the structural strength of similar aluminum equipment.

• Korea Trade Review
• /
• v.48 no.2
• /
• pp.45-69
• /
• 2023

The advent of the 4th industrial technology brought about various changes and innovations in the overall industry, but the digitalization of the logistics industry, which involved complicated paperwork processes and various stakeholders, was somewhat behind compared to other industries. However, changes and innovations related to digitalization in the logistics industry began to accelerate due to the impact of COVID-19. This study is to check the digitalization status of container liners accelerated by these changes, analyze the impact of such changes on customer satisfaction and behavioral intention. In this study, a questionnaire survey was conducted for 30 days targeting workers in the logistics industry who had experience using digitalization products of container shipping companies, and a total of 144 questionnaire responses were used to verify hypotheses. To summarize the results of this study, first, it was confirmed that perceived ease of use has a positive (+) effect on perceived usefulness. Second, perceived ease of use was found to have a positive (+) effect on customer satisfaction. Third, it was found that perceived usefulness had a positive (+) effect on customer satisfaction. Fourth, perceived usefulness has a positive (+) effect on behavioral intention. Fifth, it was found that customer satisfaction had a positive (+) effect on behavioral intention. Summarizing the results of the study, it can be summarized that the digitization of regular shipping companies is convenient to use and has a positive effect on customer satisfaction and behavioral intention if it is useful.