• 대한치과보철학회지
• /
• 제50권4호
• /
• pp.279-284
• /
• 2012

연구 목적: 광중합형 레진에 미리 함침시킨 유리섬유를 이용하여 상악 레진상 총의치를 강화시킨 경우, 강화 부위의 위치가 파절 강도와 의치 파절 시 미치는 효과를 알아보기 위함이다. 연구 재료 및 방법: 본 연구에서는 0.45 mm의 두께를 가지고 광중합형 레진에 미리 함침시킨 유리섬유(SES MESH, INNO Dental Co., Yeoncheon-gun, Korea)를 이용하여 상악 총의치를 강화하였고, 강화재료의 위치 및 유무에 따라 5개의 군(대조군, 의치상을 섬유 망사로 강화하지 않음; A군, 순측 치조정 중앙부 강화; B군, 순측 치조정 하방의 구개 추벽부위 강화; C 군, 구개 중앙부위 강화; D 군, 의치상 전체 강화)으로 나누었으며, 군당6개의 시편을 제작하였다. 파절강도를 Instron test machine (Instron Co., Canton, MA, USA)을 이용해 5.0 mm/min의 크로스헤드 속도를 부여하여 구하였으며, 하중은 20 mm의 지름을 가진 구형 하중체를 통해 의치 중심부에 전달되었다. 파절 강도 시험 후 나타난 의치의 파절 양상을 분석하였다. 파절강도를 일원배치분산분석을 통해 검정하였다(${\alpha}$=.05). 결과: 파절강도에 있어 각 군간 통계적으로 유의한 차이를 보이지 않았다(P>.05). 의치의 파절 양상을 분석한 결과 A군에서는 전후방파절과 후방파절의 양상을 주로 보였고, B군, C군 그리고 대조군에서는 정중국소파절이 주로 관찰되었으며 D군에서는 대부분 후방파절을 보였다. 결론: 파절 강도를 측정하여 분석한 결과 유리 섬유에 의한 강화 유무와 위치에 따른 차이를 보이지 않았다. 의치의 파절 양상을 분석한 결과 유리 섬유에 의한 강화를 통해 균열을 억제하는데 효과를 보인다고 판단된다.

• 대한치과보철학회지
• /
• 제62권2호
• /
• pp.131-139
• /
• 2024

무치악 환자에서 임플란트를 이용한 보철치료는 임플란트 고정성 보철, 임플란트 융합 국소 의치, 하이브리드 보철물, 임플란트 유지 및 지지 피개의치 등의 다양한 방법이 있다. 본 증례에서는 중등도 이상의 만성 치주염에 이환 되어 전악 발치가 필요한 환자에서 computer guided surgery를 이용하여 계획된 위치에 임플란트를 식립하였다. 상악은 불량한 골질로 초기고정력이 충분하지 않아 지연 부하를 시행하였고 골 유착 기간 동안 임시 의치를 사용하였다. 하악은 안정적인 초기 고정을 얻어 즉시 부하를 이용하여 환자의 불편감을 감소시켰다. 임플란트 일차 안정은 즉시 부하를 얻기 위해 가장 중요한 요소로 여겨지기 때문에 수술 전 반드시 임상적, 방사선학적 평가를 통해 잔존 치조골 양 및 골질을 파악해야 한다.

• 대한치과보철학회지
• /
• 제26권1호
• /
• pp.197-206
• /
• 1988

The purpose of this study was to investigate the effect of wearing the removable partial denture on plaque accumulation. Twelve removable partial denture cases were examined. Patients were recalled three consecutive 3 day periods. Plaque index was measured after each 3 day period. (1) not wearing the denture, (2) wearing the denture, (3) wearing the denture after intensive tooth brushing instruction. The results were as follows: 1. Plaque indices of all the remaining teeth were higher following the wearing of removable partial denture than those of teeth not wearing the denture and those of teeth after intensive tooth brushing instruction. 2. Plaque indices showed statistical difference between all the tooth surfaces which were in contact with the denture and those which were not. 3. Plaque indices showed no statistical difference between buccal and lingual surfaces which were in contact with the denture and those which were not. 4. Plaque indices showed statistical difference between proximal surfaces which were in contact with the denture and those which were not.

• 대한치과기공학회지
• /
• 제35권1호
• /
• pp.49-56
• /
• 2013

Purpose: The deformation characteristics induced by non-destructive stresses using piezoelectric transducer(PZT) were analyzed for 3-unit fixed partial dentures manufactured PFM, Everest(CAD/CAM) and Zirkonzahn(copy milling, MAD/MAM) by electron speckle pattern interferometery(ESPI). Methods: The ESPI analysis after loading the restoration with PZT by applying electric voltage of 900mV at the points of 10 mm above the base of the prostheses. Results: PFM and All-Ceramic Everest prostheses showed about 0.1 ${\mu}m$ while that of All- Ceramic Zirkonzahn prostheses showed 0.085 ${\mu}m$, demonstrating that Zirkonzahn displaced less. For PFM and All-Ceramic Zirkonzahn prostheses, the displacements were large at just below the loading point, while generalize displacement was shown over the loading point and weak connector areas for All-Ceramic Everest prostheses. Conclusion: We could find that the deformation characteristics induced by non-destructive stresses using PZT analyzed by ESPI were similar to the fracture strengths evaluated using universal testing machine.

• 대한치과보철학회지
• /
• 제21권1호
• /
• pp.67-72
• /
• 1983

Path of insertion(1) can be defined that the direction of movement of an appliance from the point of initial contact of its rigid parts with the supporting teeth to the place of final rest. Krol(2) described that in the conventional path of insertion, all the rests are seated more or less simultaneously but in the use of the rotational path one segment of the partial denture is seated first then the remainder of the prosthesis is rotated into position. The rotational path of insertion is limited primarily to the tooth borne prosthesis. Its great advantages are the elimination of anterior clasps to improve ethetic and reduction of tooth coverage to minimize plaque accumulation. Either a rigid minor connector or proximal plate provides retention through its intimate contact with a proximal tooth surface below the height of contour as indicated at a o-degree tilt. A specially designed rest in conjunction with this retentive component satisfies the basic requirements of clasp design. The purpose of this study was a clinical evaluation of rotational path removable partial dentures. Author delivered rotational path removable partial dentures to three different cases of patients and evaluated function of the dentures, difficulties of removal and insertion of the dentures and supporting structures of the abutment teeth by means of clinical and X-ray examinations for eighteen months. According to the examination data author came to the conclusion that the prognosis of the rotational path removable partial dentures was excellent.

• 대한치과보철학회지
• /
• 제30권2호
• /
• pp.203-224
• /
• 1992

The purpose of this study was to evaluate the stress distribution developed in supporting structures by distal extension removable partial denture with 4-types of direct retainer. The direct retainers examined were Akers clasp, RPI clasp, RPA clasp and RPL clasp in bilateral & unilateral free end case. 3-dimensional photoelastic stress analysis was used to record the isochromatic fringe patterns and to calculate the compressive stress at measuring points. The results were as follows. 1. In bilateral free end case, RPI clasp exhibited the similar stress distribution on distal and mesial alveolar crest but Akers clasp exhibited higher stress concentration on distal alveolar crest than mesial alveolar crest. 2. In bilateral free end case, RPA clasp and RPL clasp exhibited the similar stress distribution on distal and mesial alveolar crest and RPL clasp exhibited higher stress concentration on buccal alveolar crest than lingual alveolar crest. 3. Akers clasp produced high stress concentration on residual alveolar ridge distally, but RPI clasp, RPA clasp and RPL clasp produced even stress distribution on residual alveolar ridge. 4. Removable partial denture in unilateral free end case exerted higher stress on abutment tooth root apex than bilateral distal extension removable partial denture.

• 대한치과의사협회지
• /
• 제54권7호
• /
• pp.513-520
• /
• 2016

In crossed occlusion, displacement of removable partial denture is likely to occur during function due to different characteristics of abutment and supporting tissue. It increases discomfort to the patient. In addition, adverse effect on the residual ridge and abutment can induce an unfavorable prognosis of the denture. In this case, a small number of implants can be placed in strategic locations. Attachment can be added for additional support and retention of removable partial denture assisted by implants. This article describes the rehabilitation of a crossed occlusion patient using implant-assisted removable partial denture with Locator$^{(R)}$ attachment. After 24 months, the patient was satisfied with the aesthetic and function of the prosthesis that is maintained stable.

• 대한치과기공학회지
• /
• 제29권1호
• /
• pp.93-101
• /
• 2007

The purpose of this study is to evaluate the effect of three different oblique mechanical loading to occlusal surfaces of posterior implant partial dentures on the stress distributions in surrounding bone, using 3-dimensional finite element method. A 3-dimensional finite element model of a posterior implant partial dentures composed of three unit implants, simplified 3 gold alloy crown and supporting bone was developed according to the design of AVANA self tapping implant for this study. Three kinds of surface distributed oblique loads(300 N) are applied to following occlusal surfaces in the three crowns; 1) All occlusal surfaces in the three crown(load of 300 N was shared to three crown), 2) Occlusal surface of centered crown (load of 300 N was applied to a centered crown), 3) Occlusal surface of proximal crown(load of 300 N was applied to a distal proximal crown). In the results, 141 MPa of maximum von Mises stress was calculated at third loading condition and 98 MPa of minimum von Mises stress was calculated at first loading condition. From the results, location and type of occlusive loading conditions are important for the safety of supporting bone.

• 대한치과보철학회지
• /
• 제38권1호
• /
• pp.59-72
• /
• 2000

This study was performed to investigate the effects of tooth mobility and design of the direct retainer on the stress of supporting tissues in distal extension removable partial denture. Tooth mobility was simulated and four different types of direct retainer such as Alters clasp, I-bar clasp, wrought wire clasp, and Dalbo attachment were designed and stress on the support-ing tissues were measured and analyzed with straingauge method. The following conclusions were drawn from this study. 1. The stress revealed at the lingual side of alveolar bone of the abutment tooth in edentulous area was the largest. 2. The stress at the lingual side of alveolar bone of the abutment tooth in edentulous area was increased according to the increase of tooth mobility in I-bar clasp and Dalbo attachment. 3. The stress at the residual ridge crest was the great in Dalbo attachment on mobility 0, in I-bar clasp on mobility 1, and in wrought wire clasp on mobility 2. 4. There was little changes of stress according to the increase of tooth mobility at buccal and lingual side of the residual ridge crest and around the abutment teeth in dentulous area.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• 제33권2호
• /
• pp.169-172
• /
• 2007

본 증례는 안면의 수포성 병변과 함께 치조골 괴사에 의한 자연적인 치아 발거가 나타난 경우이다. 환자는 대상포진과 악골 골수염에 대해 치료를 받고, 매달 정기적으로 경과 관찰 중이며, 골수염의 재발 징후 및 증상은 보이지 않고 현재까지는 양호하게 치유되고 있다. VZV가 재발하지 않는 한 예후는 양호할 것으로 생각된다. 괴사골과 이환치의 발거를 시행한 무치악부위는 일반적인 가철성 국소의치를 통해 수복되고 있다. 그러나, 병소의 하악관의 침범으로 인해서 우측 하악 영역의 감각이상은 여전히 남아 있다.