• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1992.04a
• /
• pp.104-108
• /
• 1992

국소가열 가공방법은 종래 사용 되어온 온간,열간 가공의 경우와는 달리 프레스 성형의 응력조건 또는 양긱,열(온도)에 의한 재료 성질의변화 등을 고려하여, 가공하는 박판의 필요 부분을 선택적으로가열, 냉각 또는 두가지를 조합하여 처리하는 것이다. 온도 구배의 영향이 박판 성형의 공정에 많은 영향을 줌에도 불구하고 종래의 박판 성형가공은 주로 열을 고려하지않은 성형해석이 대부분이었고 열을 고려 하였다라도 대 부분이 실험에의존 한 방법이었다. 그러나 실제의 공정 설계에서 실험만을 통한 공정 변수의규명은 많은 노 력과 시간을 필요로 하기 때문에 컴퓨터를 통한 시뮬레이션의 필요성이 대두 되었다. 본 연구는 박판 축대칭 온도 구배와, 변형해석을 유한 요소적 방법을 통해 행하고 이를 실제 공정 설계에 적용할 수있도록 도움을 주고자 하는 데에 있다.

• Journal of the Korean Society for Precision Engineering
• /
• v.10 no.3
• /
• pp.198-204
• /
• 1993

The study is concerned with finite element analysis and design of axisymmetric deep drawing by local heating. When the bottom shape of a cup is not flat but in complex-shaped, i.e., hemispherical, the cup cannot be drawn in one or two processes in the conventional deep drawing process and the limit drawing ratio is limited as well. By introducing local heating selectively with regards to the heating position, the formability of the sheet metal can be greatly increased with the reduced number of processes. In the Process analysisthe rigid- viscoplastic finite element method is employed and the temperature effect is incorporated. Bishop's step-wise decoupled method is employed to analyze the thermomechanical interaction between deformation and heat transfer. Axisymmetric deep drawing of a hemisphere-bottomed cup has been analyzed for various combinations of heat application in the punch and the die. At the first stage of deep drawing stretch forming is practically carried out by firmly pressing the blankholder with the punch and the die heated at various levels of temperature. Then at the second stage the same cup is drawn for the saame or different combination of temperature. From the computation, it has thus been shown that the fromability of a cup is greatly increased in two-stage deep drawing with increased limet drawing ratio.

• Food Science and Preservation
• /
• v.23 no.3
• /
• pp.422-431
• /
• 2016

To investigate the causes of the thermal deformations of packaging materials when microwave-heating ready-to-eat sauce products packaged in stand-up pouches, patterns of temperature changes were determined using an infra-red thermal imaging camera, a thermo-sensitive tape, and a fiver-optic thermometer. The temperature distributions of spicy chicken sauce and Indian curry samples in a stand-up pouch were found to be uneven during micrewave heating. A sharp increase in the temperature was detected, especially above the filling layers and in the corners of sealing layers of the package. The temperature measurements using an infra-red thermal imaging camera are restricted to the surface, and therefore might underestimate the actual temperature. Using a thermo-sensitive tape, temperature up to $200^{\circ}C$ were measured in the spicy chicken sauce sample showing package deformation. When the temperature is measured using a fiber-optic thermometer, it is crucial to have precise sensor performance to accurately measure the temperature in a narrow hot-spot area of the package. In this experiment, the fiber-optic thermometer was attached to a GaAs crystal sensor, which obtained more sensitive and accurate temperature measurements than those by a convectional sensor.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.6 no.3
• /
• pp.37-43
• /
• 2002

There have been numerous experimental studies for heat transfer measurement technique. This study investigates optical methods for measuring local heat transfer coefficient using thermochromic liquid crystal. Transient and steady methods have been utilized to measure local heat transfer coefficient on a cylinder with a cross flow. The steady method is based on the heat-coating technique and two transient methods adopt by-pass technique and insertion technique, respectively. Both techniques of transient method employ heating technique in which the flow is heated by using the electric heater and cooling technique which cools the preheated cylinder. Experimental results indicate that each methods have nearly similar results. Detailed discussions have been made for its own advantages and disadvantages.

• 전기의세계
• /
• v.41 no.10
• /
• pp.16-23
• /
• 1992

원적외선의 이용은 에너지절약을 목적으로한 효율이 높은 열전파형태로서 주로 응용되고 있다. 따라서 방사체의 적외선 방사특성과 피가열체의 적외선 흡수특성과의 관계가 먼저 명확하게 규명되어야 한다. 그러면, 그 흡수특성과 정합된 원적외선 방사세라믹스의 제작도 가능하게 되어갈 것이므로 원적외선의 작용효과가 각종 분야에서 이용되어 갈 것이다. 예를들면 의료분야에서 과거에는 인체의 일부를 가온할 필요가 있을 때에는 고주파전류, 마이크로파 또는 환부를 유동 파라핀속에 넣어 환부를 따뜻하게 하는 방법 등이 있지만 만약 어떤파장의 원적외선이 인체의 피부 깊숙이 투과가 가능하다면 마이크로파 방생장치 대신에 원적외선의 발생장치가 값이 저렴하고 기온부를 국소로 제한 할 수 있으므로 널리 사용되어질 것이다. 또 식품분야에서는 에너지절약의 관점에서 뿐만아니라 조리의 관점에서도 원적외선의 이용이 진전되어 갈 것으로 생각된다. 한편 원적외선센서의 진전은 놀랄만하여 앞으로 초전도세라믹스를 이용한 원적외선 검출의 죠셉슨센서는 더욱 진전되어 질것으로 생각된다. 어떻든 각종 원적외선방사 세라믹스의 개발과 원적외선 영역에서의 파장 특성에 대한 측정법이 확립되어짐에 따라서 원적외선 이용은 앞으로 각종방면에 진전되어질 것이다.

• Journal of the Korean Vacuum Society
• /
• v.20 no.4
• /
• pp.307-312
• /
• 2011

As a technique for removing cancerous tumors from normal tissue, radio-frequency electromagnetic waves were employed to heating target cells up to the critical temperature, which kills the cancerous cells. However, its use in treating tumors in soft organs is limited by inconvenient factors, which are use of high-currents and long time operation. In this work, the feasibility of the localized heating by inserting four conducting electrodes with tiny direct current is investigated. The heat source is resulting from the electric field as known as resistive heating. We have investigated the temperature distribution as a function of applying DC voltages ranging from 10 V to 30 V with 10 V step. From the simulation results, the mushroom-like lesion shape by applying 20 V is generated by four electrodes within a few minutes, that is proper to the clinical application.

• Fire Science and Engineering
• /
• v.27 no.3
• /
• pp.8-13
• /
• 2013

In case of fire in a high-rise building fire can be easily spread along the building external walls dramatically if the flame comes out through broken windows. There are a few effective methods to prevent the fire spread at the moment. One is using a fire resistance window, and the other is using a window sprinkler that discharges water to resist flame in case of fire. In this study a window sprinkler which is installed on top of windows and prevents fire by discharging water when its heat-responsive element opens was tested using a large scale furnace in accordance with the standard temperature-time graph. Test result showed that one window sprinkler was able to protect a 2,400 mm wide window from fire for 2 hours and the window backside's temperature locally increased up to $126^{\circ}C$ but kept stable around $100^{\circ}C$ for the test duration.

• Investigative Magnetic Resonance Imaging
• /
• v.15 no.1
• /
• pp.48-56
• /
• 2011

Purpose : The aim of this study is to measure the typical MR variables such as $T_1$- and $T_2$-relaxation times according to morphological characteristics of gold nanopartides as a preliminary study to perform theragnosis using local heating by gold nanopartides. Materials and Methods : Two types of gold nanoparticles were used. Spheres were synthesized by various methods and stirring speed. Rods were synthesized by adding various concentrations of sphere nanopartides. Gold nanopartides were mixed with 2% agarose gel at 1:1 ratio and then signals were acquired using a 1.5T MRI. For the measurements of $T_1$-and $T_2$-relaxation times, TR and TE were varied, respectively. The results were acquired through $T_1$ and $T_2$ curves based on the intensities of MR image using self-developed software. And Statistical analysis was performed. Results : $T_1$ times were measured 1.86 sec and 2.08 sec for sphere and rod, respectively. On the other hands, $T_2$ times were measured 57 ms and 35.45 ms for sphere and rod. Conclusion : The changes of the MR variables according to the morphological characteristics of the gold nanopartides were confirmed. Optimal MR imaging conditions can be obtained by choosing proper TR and TE according to the type of nanoparticles.

• Journal of Life Science
• /
• v.15 no.5 s.72
• /
• pp.790-795
• /
• 2005

The effects of liquid culture of Coriolus (C) versicolor on weight gain, food intakes, food efficiency ratios, serum and hepatic lipid concentrations were investigated in male rats fed the high cholesterol diets. Eight weeks old Sprague-Dawley rats were given three different types of diet for six weeks, respectively: a control diet ($ 20\% fat +0.5 \% $ cholesterol), two kinds of C versicolor diet (control diet + $ 30\% or 40\%$C. versicozor in water) according to the levels of C. versicolor supplementation. The body weight gains of the rats fed $ 30\% or 40\% $ C. versicolor diets were lower than those in the rats fed the control diet. The food intake, food efficiency ratios, and liver, kidney, epididymal fat pad weights of the rats fed $ 30\% or 40\%$ C. versicoEer diets were similar to those of the rats fed the control diet. The concentrations of hepatic cholesterol and triglyceride in the rats fed $ 30\% or 40\% $ C. versicolor diets were significantly lower than those in the rats fed the control diet. The concentrations in serum total cholesterol, LDL-cholesterol, and atherogenic index ratios were significantly lower in the rats fed $ 30\% or 40\%$ C. versicolor diets compared to those fed the control diet. The HDL-cholesterol/total-cholesterol ratios was significantly higher in the rats fed $ 30\% or 40\% $ C. versicolor diets compared to those fed the control diet. The fecal excretion of total lipid and triglyceride in the rats fed $ 40\% $ C. versicolor diet was significantly higher than that of the rats fed the control diet. There were no significant difference found in the serum trigly-ceride, phospholipid and HDL-cholesterol concentrations among the experimental groups. These results showed that the C. versicolor feeding decreased the hepatic cholesterol, triglyceride, and the serum total cholesterol, LDL-cholesterol and atherogenic index, and increased the serum HDL-cholesterol/ total-cholesterol ratio of the rats.

• The Korean Journal of Nuclear Medicine
• /
• v.32 no.4
• /
• pp.374-381
• /
• 1998

Purpose: I-131 labeled (2'-deoxy-2'-iodo-${\beta}$-D-arabinofuranosyl) adenine (IAD) may be involved in DNA synthesis during active proliferation of tumor cells. We conducted this study to find out the biodistribution of IAD and it's feasibility for scintigraphic tumor imaging. Materials and Methods: Tosyl acetyl-adenosine was dissolved in acetonitrile, and I-131-NaI was added and heated to synthesize IAD. Female Fisher 344 rats innoculated with breast tumor cells were injected with 0.27 MBq of IAD. Rats were sacrificed at 0.5, 1, 2, 4, 24h and the % of injected dose per gram of tissue (%ID/g) was determined. For scintigraphy, rats bearing breast cancer were administered with 1.11 MBq of IAD and imaging was performed after 2 and 24h. Then, rat body was fixed and microtomized slice was placed on radiographic film for autoradiography. Results: %ID/g of tumor was 0.74 (0.5h),0.73 (1h), 0.55 (2h), 0.38 (4h), and 0.05 (24h), respectively. At 1h after injection, %ID/g of tumor was higher than that of heart (0.34), liver (0.42), spleen (0.47), kidney (0.69), muscle (0.14), bone (0.33) and intestine (0.51). However, %ID/g of tumor was lower than blood (1.06), lung (0.77), and thyroid (177.71). At 4h, %ID/g of tumor in comparison with other tissue did not change. Tumor contrast expressed by tumor to blood ratio was 0.69 and tumor to muscle ratio was 5.11 at 1h. However, these ratios did not improve through 24h. On autoradiogram and scintigraphy at 2 and 24 hour, the tumor was well visualized. Conclusion: This results suggest that IAD may have a potential for tumor scintigraphy. However, further work is needed to improve localization in tumor tissue.