• Journal of the Korea Organic Resources Recycling Association
• /
• v.27 no.2
• /
• pp.67-73
• /
• 2019

In this study, to optimize the production and utilization of biogas for organic waste resources, the precision monitoring of on-site facilities and the energy balance by facility were analyzed, and the solutions for field problems were investigated, and the design and operation guidelines for pretreatment facilities and generators were presented. Gas pre-treatment is required to solve frequent failures and efficiency degradation in operation of high quality refining facilities, and processing processes such as desulfurization, dehumidification, deoxidization, dust treatment, volatile organic compounds, etc. Since these processes are substances that are also eliminated from the high-quality process, quantitative guidelines are not presented in the gas pretreatment process, but are suggested to operate during the processing process as a qualitative guideline. In particular, dust, siloxane, and volatile organic compounds are the main cause of frequent failure of high-quality processes if they are not removed from the gas pretreatment process. Design of the biogas high-quality process. The operation guidelines provide quality standards [Methane content (including propane) of 95% or more] with 90% or more utilization of the total gas generation, two systems, and a margin of 10% or more. It also proposed installing gas equalization tank, installing thermal automatic control system for controlling equalization of auxiliary fuel, installing dehumidification device at the back of high quality for removing moisture generated in the process of gas compression, installing heat-resisting facilities to prevent freezing of facilities in winter and reducing efficiency, and installing membrane facilities in particular.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.12
• /
• pp.805-813
• /
• 2018

The research was conducted with the purpose of providing effective safety and quality control system for assistive products for handicapped those are used extensively. Assistive products couldn't be classified independently due to collision with the act of medical device and lack in legal basis. The issues about safety and quality have been solved by other legal frames on a case by case basis. We couldn't find any abroad case of independent safety and quality control policy. For the practical solution, this article suggested hybrid classification system mixed with existing policies. Each classified branches are allocated to the appropriate policy of safety and quality control so those are ease of understanding and prospect. And also a delicacy process was suggested not to leave off any assistive products. Through these suggests of the improvement it is expected that blind areas of safety and quality control for assistive products for handicapped could be solved and identity of assistive products could be established to provide product safety for handicapped and boost relevant industries.

• Journal of Korean Society for Quality Management
• /
• v.51 no.2
• /
• pp.297-313
• /
• 2023

Purpose: The purpose of this study is to investigate the causes of shifting errors reported in military tracked vehicles and to improve related quality to prevent recurrence. Methods: A systematic disassembly and inspection of the transmission is carried out and an experimental simulation is conducted to reproduce the shifting error phenomenon. Electrical characteristic tests are subsequently performed and microscopic observation is also carried out on the disassembled connector parts such as pins and fractured surfaces. Results: Oil contamination and swelling deformation are observed in the connector to the vehicle due to oil leakage of its counterpart connector to the transmission. This causes electrical contact failure between both connectors in the fastened state, and it is found that shifting error of the tracked vehicle could occur subsequently. To prevent the recurrence of this phenomenon, comprehensive quality improvement is conducted including product improvement of the wiring harness assembly and strengthening activities for quality control and preventive maintenance. Conclusion: This study is expected to be helpful as a prior case study for cause analysis and recurrence prevention in the event of similar cases in the future.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.27 no.1
• /
• pp.77-85
• /
• 2019

Biogasification is a technology that uses organic wastes to reproduce as environmental fuels containing methane gas. Biogasification has attracted worldwide attention because it can produce renewable-energy and stable land treatment with prohibit from landfilling and ocean dumping of organic waste. Biomethane is produced by refining biogas. It is injected into natural gas pipeline or used transportation fuel such as cars and buses. 90 bio-gasification facilities are operating in 2016, and methane gas production is very low due to it is limited to organic wastes such as food waste, animal manure, and sewage sludge. There are seven domestic biomethane manufacturing facilities, and the use of high value-added such as transport fuels and city-gas through upgrading biogas should be expanded. On the other hand, the rapid biogasification of organic wastes in domestic resulted in frequent breakdowns of facilities and low efficiency problems. Therefore, the problem is improving as technical guidance, design and operational technical guidance is developed and field experience is accumulated. However, while improvements in biogas production are being made, there is a problem with low utilization. In this study, the problems of biomethane manufacturing facilities were identified in order to optimize the production and utilization of biogas from organic waste resources. Also, in order to present the design and operation guideline of the gas pretreatment and the upgrading process, we will investigate precision monitoring, energy balance and economic analysis and solutions for on-site problems by facility.

• Korean Journal of Breeding Science
• /
• v.43 no.6
• /
• pp.538-542
• /
• 2011

A new malting barley variety, 'Baegho', was developed from a cross between Azuma Golden and Nishinochikara in 1998. An elite line, YMB2139-2B-1-10-2, was selected in 2005 and designated as Milyang137. It showed good agronomic performance in the regional adaptation yield trials (RYT) from 2006 to 2008 and was released with the name of 'Baegho' having high yielding and BaYMV and powdery mildew resistance. The average heading and maturing dates of 'Baegho' were April 21 and May 28, which were 3 and 2 day later than those of Hopum, check variety, at the RYT, respectively. 'Baegho' has shoter culm length (78 cm), more spikes ($1,062per\;m^2$) and heavier 1,000 grain weight (40.7 g) than those of Hopum, respectively. 'Baegho' is resistant to domestic BaYMV strains I, III and IV and powdery mildew at Iksan. In growth habit, 'Baegho' is close to type (IV) that is distinguished from other Korean malting barley cultivars, which could tolerant to premature heading damage that is major concern for the practice of the malting barley cropping. The yield potential of 'Baegho' in the RYT was about 5.57 MT/ha, which is about 13% higher than those of Hopum. This variety has good malting quality in grain and malting analysis showed better 1,000 grain weight, husk rate, diastatic power than those of Hopum. 'Baegho' applied for protection of new varieties of plant in 2009.

• Korean Journal of Breeding Science
• /
• v.43 no.3
• /
• pp.184-189
• /
• 2011

'Younghan' (Hordeum vulgare L.), a winter barley for forage use, was developed by the breeding team at the Department of Rice and Winter Cereal Crop, National Institute of Crop Science, Rural Development Administration in 2008. It was derived from a cross between $F_1$['YB3433-3B-5'/'YB3135-3B-2-3'] and 'YB3135-3B-2-3'. 'SB971305-B-B-B-4-4' line was selected for its earliness, resistance to disease and good agronomic characteristics. The promising line showed both high yield and lodging resistance in the yield trials in Iksan in 2004 to 2005, and designated as 'Iksan420'. The line was subsequently evaluated for winter hardiness, earliness, and yield at eight locations throughout Korea for two years from 2007 to 2008 and finally named as 'Younghan'. It has the growth habit of IV, erect plant type, green leaf and thick culm in diameter. Its heading date was April 24, and the maturing date was May 25 in paddy field conditions, which were one day earlier than those of the check cultivar 'Youngyang'. The cultivar 'Younghan' had better winter hardiness, and resistance to lodging and BaYMV than those of the check cultivar did. The average forage dry matter yield of 'Younghan' was approximately 12.0 MT/ha in adapted region. 'Younghan' also showed 8.5% of crude protein content, 27.2% of ADF, and 67.1% of TDN, including higher grade of silage quality for whole crop barley. This cultivar would be suitable for (area with daily minimum temperature in January) above $-8^{\circ}C$ in Korean peninsula.

• Proceedings of the Plant Resources Society of Korea Conference
• /
• 2019.10a
• /
• pp.40-40
• /
• 2019

는쟁이냉이는 전국 각지 산지의 응달이나 물가에서 자생하는 여러해살이풀이다. 3월 경 눈을 뚫고나와 가장 이른 봄나물로 식용하기도 한다. 특유의 매운 맛이 있어 식용작물로 발전가능성이 높은 식물종이다. 따라서 본 연구는 는쟁이냉이 재배기술 정립을 위한 기초자료 수집의 일환으로 수행되었다. 차광에 따른 는쟁이냉이 생육특성을 비교 분석하기 위해 경북 봉화군 소재 국립백두대간수목원 양묘장 노지에 무차광, 40% 차광, 55%차광, 65%차광 처리구를 배치 후, 실험을 진행하였다. 생육특성의 비교를 위해 초장, 초폭, 엽 수, 엽길이, 엽너비, 엽병길이, SPAD 값 총 7가지 항목에 대해 생장기(6월), 휴면기(9월) 두 차례 측정하였다. 측정 결과, 모든 측정값이 차광구가 무차광구보다 높게 나타났다. 또한 무차광구는 6월 조사 이후, 7월 말까지 생장량이 줄어들다가 전량 지상부 고사가 발생하여 는쟁이냉이 재배를 위해서는 차광처리가 필수적으로 필요하다는 것을 확인할 수 있었다. 측정항목 중 초장, 초폭, 엽길이, 엽너비, 엽병길이는 차광율이 높을수록 증가하는 경향을 보였다. 그러나 엽록소함량을 추정할 수 있는 SPAD 값은 40% 차광구가 가장 높았고 55%차광구, 65%차광구에서는 오히려 감소하는 경향을 보였다. 또한 엽 수도 40% 차광구가 가장 높았다. 위 결과를 종합해볼 때, 는쟁이냉이 재배 시 55% 이상의 차광율을 적용하면 잎 자체의 크기 증대를 기대할 수 있으며, 40% 수준의 차광율을 적용하면 잎 수와 혁질의 잎을 생산할 수 있을 것으로 여겨진다. 다만, 본 실험은 는쟁이냉이 재배 생산량에 대한 부분에 집중하였고 상품화를 위해서는 품질에 관한 연구가 추가적으로 이루어져야 할 것으로 판단된다.

• Journal of Practical Agriculture & Fisheries Research
• /
• v.25 no.4
• /
• pp.118-126
• /
• 2024

Recently, the alternative meat (food) market is growing rapidly due to the increase in meat consumption due to global population growth and income improvement, as well as issues such as equal welfare, carbon neutrality, and sustainability. The government is also developing a green bio convergence new industry development plan to foster alternative foods, but there are difficulties in commercialization due to the lack of technology and insufficient production facilities among domestic small and medium-sized enterprises, so it is necessary to build joint utilization facilities and equipment to resolve the difficulties faced by companies. am. In addition, small and medium-sized enterprises are having difficulty developing and commercializing plant-based meat substitutes due to a lack of technical skills, and related equipment is expensive, making it difficult to build equipment on their own. Accordingly, Jeollabuk-do is pursuing a strategy to secure the source technology for development, processing, and industrialization of plant-based substitute meat at the level of developed countries by establishing a plant-based alternative meat industrialization center. In this study, an economic feasibility analysis study was conducted when a plant-based alternative meat industrialization center is built in Jeollabuk-do. As a result of the analysis, B/C=1.32, NPV=374 million won, and IRR=4.8%, showing that there is economic feasibility in establishing an alternative meat industrialization center. In addition, as a result of analyzing the regional economic ripple effect resulting from the establishment of an industrialization center, if 38 billion won is invested in Jeollabuk-do, the nationwide production inducement effect is 74 billion won, the added value inducement effect is 29.8 billion won, and the employment inducement effect is 672 people

• Journal of the Korea Organic Resources Recycling Association
• /
• v.27 no.2
• /
• pp.57-66
• /
• 2019

This study carried out on-site investigation and precision monitoring to prepare proper design and operation technical guidelines for the use of bio gas in organic waste resources (fertilizing urine, food waste, food waste, food waste, etc.). According to the government's mid- and long-term policy on bio gasification, the expansion of waste resources is actively being pushed forward. However, facilities that use the biogas produced for urban gas and transportation are still under-efficient. Precision monitoring was carried out for biogasification facilities of organic waste resources in seven locations nationwide. When the results of precision monitoring were summarized with the four-season average, the efficiency analysis of each organic waste resource showed that the organic breakdown rate was 66.3% on average on VS basis. Analysis of biogas characteristics before and after pretreatment revealed that the $H_2S$ average of the entire facility was measured at 949.7 ppm using iron salts and desulfurization (dry, wet) and that the quality refining facility shearing and rear end was 29.0 ppm and 0.3 ppm. The methane content was found to be reduced by 65.6% at the rear of the fire tank, 63.5% at the back and 97.5% at the rear.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.30 no.6
• /
• pp.326-336
• /
• 2018

Continuous measurement of nearshore waves around Korea over long period is very demanding to setup plans for prevention of disasters of port and coastal structures. In this respect, a new web-based system, termed as WINK, was established, which collects nearshore wave data from Korea Meteorological Agency (KMA), Korea Hydrographic and Oceanographic Agency (KHOA), and Ministry of Oceans and Fisheries (MOF) and provide them after quality control of the data. This paper describes technical aspects regarding collection and selection of the wave observation data, construction of wave hindcasting data, the methodology of quality control for the selected wave data, and overall process of building the web-based data providing system.