• Korean Journal of Remote Sensing
• /
• v.33 no.5_2
• /
• pp.721-732
• /
• 2017

With the increasing socio-economic importance of rice as a global staple food, several models have been developed for rice yield estimation by combining remote sensing data with carbon cycle modelling. In this study, we aimed to estimate rice yield in Korea using such an integrative model using satellite remote sensing data in combination with a biophysical crop growth model. Specifically, daily meteorological inputs derived from MODIS (Moderate Resolution imaging Spectroradiometer) and radar satellite products were used to run a light use efficiency based crop growth model, which is based on the MODIS gross primary production (GPP) algorithm. The modelled biomass was converted to rice yield using a harvest index model. We estimated rice yield from 2003 to 2014 at the county level and evaluated the modelled yield using the official rice yield and rice straw biomass statistics of Statistics Korea (KOSTAT). The estimated rice biomass, yield, and harvest index and their spatial distributions were investigated. Annual mean rice yield at the national level showed a good agreement with the yield statistics with the yield statistics, a mean error (ME) of +0.56% and a mean absolute error (MAE) of 5.73%. The estimated county level yield resulted in small ME (+0.10~+2.00%) and MAE (2.10~11.62%),respectively. Compared to the county-level yield statistics, the rice yield was over estimated in the counties in Gangwon province and under estimated in the urban and coastal counties in the south of Chungcheong province. Compared to the rice straw statistics, the estimated rice biomass showed similar error patterns with the yield estimates. The subpixel heterogeneity of the 1 km MODIS FPAR(Fraction of absorbed Photosynthetically Active Radiation) may have attributed to these errors. In addition, the growth and harvest index models can be further developed to take account of annually varying growth conditions and growth timings.

• Economic and Environmental Geology
• /
• v.49 no.6
• /
• pp.445-458
• /
• 2016

Most of water curtain cultivation (WCC) area in Korea has been inveterately suffering from the gradual draw-down of groundwater level and related shortage of water resources at the late stage of WCC peak time. To solve this problem, artificial recharge techniques has been recently applied to some WCC area. This study introduces infiltration gallery, which is one of the artificial recharge methods, and tentatively examined the effectiveness of three galleries installed at Sangdae-ri WCC area of Cheongju City. Seven galleries are set up at each empty space between eight vinyl houses in this area and its dimension is designed as 50 cm in each width and height and 300 cm in each length. Installation process was including bed excavation, backfill with gravels and silica sands, and completion of gallery by equipment of piezometer and covering with non-woven cloth. For each B, C, D gallery, 3 types of test including preliminary, four step and one long-term injection were performed. The first preliminary test showed the rough relations between injection rates and water level rise as follows; 20 cm and 30 cm level rise for $33.29{\sim}33.84m^3/d$ and $45.60{\sim}46.99m^3/d$ in B gallery; 0 cm, 16 cm and 33 cm level rise for $21.1m^3/d$, $33.98m^3/d$ and $41.69m^3/d$ in C gallery; 29 cm and 42 cm level rise for $48.10m^3/d$ and $52.23m^3/d$ in D gallery. Afterwards, more quantitative results estimating effectiveness of artificial recharge were reasoned out through stepped and long-term injection tests, which is expected to be employed for estimating water quantity re-injected into the aquifer through these galleries by natural injection over the period of WCC peak time.

• Analytical Science and Technology
• /
• v.31 no.4
• /
• pp.149-160
• /
• 2018

A large number of functional living products are being produced for eco-friendly or health-promoting purposes. In the manufacturing process, such products could be adulterated with raw materials with high radioactivity, such as monazite and tourmaline. Thus, it is essential to manage raw materials and products closely related to the public living. For proper management, an accurate radioactivity data of the processed products are needed. Therefore, it is essential to develop a rapid and validated analytical method. In this study, the concentration of the radioactive $^{238}U$ and $^{232}Th$ in building materials (e.g., tile, cement, paint, wall paper, and gypsum board) and living products (e.g., health products, textiles, and minerals) were determined and compared by ED-XRF and ICP-MS. By comparing the results of both methods, we confirmed the applicability of the rapid screening and precise analysis of ED-XRF and ICP-MS. In addition, $^{238}U$ and $^{232}Th$ levels were relatively lower in building materials than in living products. Particularly, $^{232}Th$ content in 6 of 47 living products exceeded (maximum $8.2Bq{\cdot}g^{-1}$) the standard limit of $^{232}Th$ content in raw material ($1.0Bq{\cdot}g^{-1}$).

• Journal of the Korea Institute of Building Construction
• /
• v.9 no.5
• /
• pp.79-86
• /
• 2009

In a steel structure, spray-applied fire resistive materials are crucial in preventing structural strength from being weakened in the event of a fire. The quality control of such materials, however, is difficult for manual workers, who can frequently be in short supply. These skilled workers are also very likely to be exposed to environmental hazards. Problems with construction work such as this, which are specifically the difficulty of achieving quality control and the dangerous nature of the work itself, can be solved to some degree by the introduction of automated equipment. It is, however, very difficult to automate the work process, from operation to the selection of a location for the equipment, as the environment of a construction site has not yet been structured to accommodate automation. This is a fundamental study on the possibility of the automation of spray-applied fire resistive coating work. In this study, the linkability of the cutting-edge RTLS to an automation system is reviewed, and a scenario for the automation of spray-applied fire resistive coating work and system composition is presented. The system suggested in this study is still in a conceptual stage, and as such, there are many restrictions still to be resolved. Despite this fact, automation is expected to have good effectiveness in terms of preventing fire from spreading by maintaining a certain level of strength at a high temperature when a fire occurs, as it maintains the thickness of the fire-resistive coating at a specified level, and secures the integrity of the coating with the steel structure, thereby enhancing the fire-resistive performance. It also expected that if future research is conducted in this area in relation to a cutting-edge monitoring TRS, such as the ubiquitous sensor network (USN) and/or building information model (BIM), it will contribute to raising the level of construction automation in Korea, reducing costs through the systematic and efficient management of construction resources, shortening construction periods, and implementing more precise construction

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.40 no.2
• /
• pp.185-194
• /
• 1995

The prevention of excessive use of nitrogen fertilizer get an attention in Korea not only for minimizing $NO_3^-$ contamination of groundwater but also for establishment of environmental friendly sustainable agriculture. In order to find out the dynamics of $NO_3^-$ in barley rhizosphere and its suitability for nitrogen fertilization strategies and for environmental control, the accumulation of $NO_3^-$ in 3 layer, 0~30cm, 30~60cm, 60~90cm of soil profile has been detected in winter barley pro-duction system. It showed the recommended N fertilization rate for winter barley cause the $NO_3^-$ contamination of groundwater through $NO_3^-$ leaching during winter. The $NO_3^-$ content of 0~90cm soil depth have directly reflected the amount of basal N fertilization in the early spring, but not 0~30cm and 0~60cm soil depth. The contents of $NO_3^-$ measured to 0~30cm, 0~60cm soil depth were not significanly correlated with yield but the contents of $NO_3^-$ measured to 90cm soil depth was highly correlated with yield. Nitrogen fertilizer requirement could be estimated accurately by soil test and it provides field specific N rate recommendation for spring N application to winter barley. It was concluded that $N_{min}$ method could be applied to korean climatic and soil condition for optimal fertilizer application rate.

• Journal of Preventive Medicine and Public Health
• /
• v.32 no.3
• /
• pp.361-373
• /
• 1999

Objectives: Receive Operating Characteristic(ROC) curve with the area under the ROC curve(AUC) is one of the most popular indicator to evaluate the criterion validity of the measurement tool. This study was conducted to develop a standardized questionnaire to discriminate workers at high-risk of work-related musculoskeletal disorders using ROC analysis. Methods: The diagnostic results determined by rehabilitation medicine specialists in 370 persons(89 shipyard CAD workers, 113 telephone directory assistant operators, 79 women with occupation, and 89 housewives) were compared with participant's own replies to 'the questionnair on the worker's subjective physical symptoms'(Kwon, 1996). The AUC's from four models with different methods in item selection and weighting were compared with each other. These 4 models were applied to 225 persons, working in an assembly line of motor vehicle, for the purpose of AUC reliability test. Results: In a weighted model with 11 items, the AUC was 0.8155 in the primary study population, and 0.8026 in the secondary study population(p=0.3780). It was superior in the aspects of discriminability, reliability and convenience. A new questionnaire of musculoskeletal disorder could be constructed by this model. Conclusion: A more valid questionnaire with a small number of items and the quantitative weight scores useful for the relative comparisons are the main results of this study. While the absolute reference value applicable to the wide range of populations was not estimated, the basic intent of this study, developing a surveillance fool through quantitative validation of the measures, would serve for the systematic disease prevention activities.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.34 no.1
• /
• pp.66-74
• /
• 2005

This survey was conducted to assess the consumer perceptions of food-related hazard in 500 housewives from all over Korea. The subjects were selected by stratified random sampling method. The survey was performed using structured questionnaire through telephone interview by skilled interviewers. The results showed that 34.6% of the respondents felt secure and were not concerned about food safety, and 65.4% were concerned about food safety. Logistic regression analysis showed that the increasing concern on food brands, food additives (such as food preservatives and artificial color), and imported foodstuffs indicated the current increasing concern on food safety. Other related factors indicating the increasing concern on food safety were education level and care for children's health. The respondents who cared about food safety expressed a high degree of concern on processed foodstuffs such as commercial boxed lunch (93.3%), imported foods (92.7%), fastfoods (89.9%), processed meat products (88.7%), dining out (85.6%), cannery and frozen foods (83.5%), and instant foods (82.0%). The lowest degree of concern was on rice. All the respondents perceived that residues of chemical substances such as pesticides and food additives, and endocrine disrupters were the most potential food risk factors, followed by food-borne pathogens, and GMOs (Genetically Modified Organisms). However, these results were not consistent with scientific judgment. Therefore, more education and information were needed for consumers' awareness of facts and myths about food safety. In addition, the results showed that consumers put lower trust in food products information such as food labels, cultivation methods (organic or not), quality labels, and the place of origin. Nevertheless, the respondents expressed their desire to overcome alienation, and recognized the importance of knowing of the origin or the producers of food. They identified that people who need to take extreme precautions on food contamination were the producers, government officials, food companies, consumers, the consumer's association, and marketers, arranged in the order of highest to lowest. They also believed that the production stage of agriculture was the most important step for improving the level of food safety Therefore, the results indicated that there is a need to introduce safety systems in the production of agricultural products, as follows: Good Agricultural Practice (GAP), Hazard Analysis and Critical Control Point (HACCP), and Traceability System (75).

• Journal of Radiation Protection and Research
• /
• v.39 no.3
• /
• pp.127-133
• /
• 2014

North Korea's uranium enrichment facility is a matter of international concern. It is of particular alarming to South Korea with regard to the security and safety of the country. This situation requires continuous monitoring of the DPRK and emergency preparedness on the part of the ROK. To assess the detectability of an undeclared uranium enrichment plant in North Korea, uranium concentrations in the air at both a short and a long distance from the enrichment facility were estimated. $UF_6$ source terms were determined by using existing information on North Korean facility and data from the operation experience of enrichment plants from other countries. Using the calculated source terms, two atmospheric dispersion models (Gaussian Plume Model and HYSPLIT models) and meteorological data were used to estimate the uranium particle concentrations from the Yongbyon enrichment facility. A maximum uranium concentration and its location are dependent upon the meteorological conditions and the height of the UF6 release point. This study showed that the maximum uranium concentration around the enrichment facility was about $1.0{\times}10^{-7}g{\cdot}m^{-3}$. The location of the maximum concentration was within about 0.4 km of the facility. It has been assumed that the uranium sample of about a few micrograms (${\mu}g$) could be obtained; and that few micrograms of uranium can be easily measured with current measurement instruments. On the contrary, a uranium concentration at a distance of more than 100 kilometers from the enrichment facility was estimated to be about $1.0{\times}10^{-13}{\sim}1.0{\times}10^{-15}g{\cdot}m^{-3}$, which is less than back-ground level. Therefore, based on the results of our paper, an air sample taken within the vicinity of the Yongbyon enrichment facility could be used to determine as to whether or not North Korea is carrying out an undeclared nuclear program. However, the air samples taken at a longer distance of a few hundred kilometers would prove difficult in detecting a clandestine nuclear activities.

• Korean Journal of Environmental Biology
• /
• v.26 no.1
• /
• pp.30-35
• /
• 2008

In order to investigate whether or not CCD-986sk cell line can be affected by Korean Ecklonia stolonifera Okamura, we examined the MTT assay when we treated Korean Ecklonia stolonifera Okamura extract in CCD-986sk human fibroblast cell line. The sample were tested for cell proliferation activity by means of a modification of the MTT assay. Ecklonia stolonifera Okamura extract showed significantly strong cell proliferation activity at the range of from 6.25 mg $mL^{-1}$ to 1.56 mg $mL^{-1}$ compared with control group. And in order to search for inhibition agents of skin melanin formation, we tested for inhibition effect of melanin pigmentation of Korean Ecklonia stolonifera Okamura using Clone M-3 mouse melanocyte cell lines. when we treated the extracts of Ecklonia stolonifera Okamura to the mouse melanocyte cell lines, the sample showed a significantly little formation of melanin pigments compared with control group at the only range of 200 mg $mL^{-1}$. These results suggest that extract of Korean Ecklonia stolonifera Okamura may represents an excellent candidate for inhibition of melanin pigmentation and for protection of human skin aging at in vitro level.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.32 no.12
• /
• pp.1903-1914
• /
• 2008

The purpose of this study was to propose an efficient and feasible global market entry strategy for the Korean apparel industry by analyzing the Italian fashion industry. In particular, the study investigated the role of foreign exhibitions and showrooms supported and organized by Italian fashion organizations. The methodology for this study was to analyze industrial reports, review previous studies and conduct in-depth interviews with 23 industry experts in Italy, Korea and LA. The results indicated that the most prominent factor in the Italian fashion industry was the fashion cluster, which is a strong and organic network of diverse fashion related areas No matter the size of the enterprise, firms can get practical, prompt and efficient support from diverse associations. The network operated by the associations provides strong support to each firm by organizing collections and exhibitions, and providing promotional activities. Showrooms and agents are another supportive "gate keeper", directly related to an enterprise's sales. However, Korean fashion firms did not have enough information or knowledge for foreign exhibitions, nor did they make aggressive promotional efforts in the global market. Despite the many fashion-related associations exist in Korea, their programs are too focused on visible accomplishments and are too oriented on "big company" and "big voice", rather than many "small firms". In conclusion, the Korean fashion industry-particularly the fashion industry in Seoul-has strong potential to become the center of the global fashion market in the future. However, the fashion support system that can act as the channel to promote firms and to meet global buyers needs to be supplemented. To feasibly create this system, government or industry associations should develop a strong and generous support system and network, and they must recognize the need for small firms to exist.