• Proceedings of the Korea Society for Simulation Conference
• /
• 1997.04a
• /
• pp.8-8
• /
• 1997

최근 시뮬레이션은 높은 신뢰도를 요구하는 통신망시스템이나, 높음 품질수준을 요 구하는 제조시스템의 분석 및 설계에 적용되어지고 있다. 이러한 신뢰도가 높은 시스템에 대한 시뮬레이션 적용의 난제는 실제 시스템과 시뮬레이션 모형이 얼마나 정확히 모델링을 하는가 하는 문제와 실제 모델링을 하여 시뮬레이션을 수행하여 얼마나 빠른 시간내에 정확 히 결과를 산출해 낼 수 있는가를 하는 것이다. 이러한 문제점을 극복하기 위해서 속산시뮬 레이션(fast simulation) 기법들이 연구되고 있다. 그러한 기법들로 Importance Sampling (IS), Regenerative Method (RM), Parallel Simulation 등이 연구되고 있다. IS는 잘 알려진 분산축소 기법으로 속산시뮬레이션을 위하여 많이 사용되고 있으나 실제로 복잡한 모델에 적용하기에는 많은 어려움이 따른다. 그 이유는 최적 표본분포 (Optimal Sampling Distribution)를 찾기 위한 방법이 정형화되어 있지 않아 모델마다 최적표본분포를 유사하게 추정해야 하는 어려움이 따르기 때문이다. 이러한 단점을 극복하기 위하여 Nonparametric Improtance Sampling을 제안하고 실제로 M/M/1 대기행렬 모형에 적용하여 보았다.

• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.36 no.11
• /
• pp.813-818
• /
• 1987

In this paper, high resolution spectral estimation by AR modelling and principal comonent analysis is proposed. The given data can be expanded by the eigenvectors of the estimated covariance matrix. The eigenspectrum is obtained for each eigenvector using the Autoressive(AR) spectral estimation technique. The final spectrum estimate is obtained by weighting each eigenspectrum with the corresponding eigenvalue and summing them. Although the proposed method increases in computational complexity, it shows good frequency resolution especially for short data records and narrow-band data whose signal-to-noise ratio is low.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.7 no.7
• /
• pp.1514-1519
• /
• 2003

This paper presents modeling and analysis of static and dynamic characteristics in three phase PWM Boost AC-AC converter used for input voltage sag compensation of custom power. Especially, using circuit DQ transformation technique, an equivalent circuit in fundamental frequency domain is obtained which has all the system characteristics. Moreover, voltage gain and input power factor is analytically induced and linearized state equation at the specific operating point is given. Finally, PSIM simulation results show the validity of the Nosed modelling and analyses.

• Journal of the Korean Institute of Gas
• /
• v.7 no.1 s.18
• /
• pp.41-46
• /
• 2003

The Phase and temperature changes of large clusters formed in a free jet expansion of acetylene in 14atm and 233K has been studied. The cluster has been treated as a sphere composed of many shells. A mean diameter of 4.88 microns was obtained by modeling the experimental cooling curve of clusters based on evaporation and heat conduction theory.

• Annual Conference of KIPS
• /
• 2015.10a
• /
• pp.1011-1014
• /
• 2015

3D 프린팅 기술의 발전을 위해서는 많은 사람들이 3D 프린팅 기술을 경험해보는 것 중요하다. 그러려면 3D 프린터와 이를 사용할 수 있는 소프트웨어가 필요하다. 시중에는 여러 가지의 3D 모델 도구가 보급되고 있다. 하지만 그 무엇도 입문자가 전문 지식 없이도 바로 사용할 수 있는 3D 모델링 도구는 없었다. 쉽다고 알려진 3D 모델링 도구인 SketchUp에서도 입문자가 사용하기엔 어렵기 때문에 우리는 3D 프린팅 입문자용 소프트웨어를 개발하였다.

• Aerospace Engineering and Technology
• /
• v.7 no.1
• /
• pp.177-182
• /
• 2008

In this article, a mathematical modeling which is composed of linearized transfer functions on POGO suppression device was executed. The main parameters of PSD model can not be easily determined from the analysis due to the nonlinearity of the parameters. This article deals a method to get the values of the main parameters from the experimental results.

• Annual Conference of KIPS
• /
• 2012.11a
• /
• pp.488-491
• /
• 2012

최근 카메라 센서 및 알고리즘의 발달로 엔터테인먼트 목적의 영상 시스템을 비롯한 공정 기술, 교육 및 의료 등 다양한 목적의 영상 시스템이 개발 되고 있다. 또한 범죄 예방, 사고 상황 인식을 위한 감시 영상 시스템의 연구도 활발히 진행되고 있다. 본 논문에서는 이상 상황 인식을 위한 지능형 교통 시스템에 대해 제안하고자 한다. 제안하는 시스템은 크게 학습 과정과 이상 상황 인식 과정으로 나누어진다. 학습 과정에서는 CCTV와 같은 정적인 카메라에서 촬영된 도로 교통 영상에서 이동 객체의 특징을 추출하고 이를 추적하여 특징 벡터를 구성한다. 구성된 특징 벡터들은 클러스터링 기법을 통해 장면을 모델링하는데 이용되며 최종적으로 이 모델을 이용해 실시간으로 도로 교통 영상에서 이상 상황을 인식할 수 있게 된다. 실험을 통한 성능 평가를 통해 시스템의 우수함을 확인 하였다.

• Korean Chemical Engineering Research
• /
• v.49 no.2
• /
• pp.230-237
• /
• 2011

In this study, the characteristic of fluid flow in the new type lung assist devices has been established using computational fluid dynamics(CFD). For the modeling, the hollow fiber was ignored, and vertical types and tangential types were used for the model. Which was to analyze the flow characteristics of the fluid flow model when there exists 1 and 2 input/output ports, and when the input/output ports is located at the center of the cylinder and at the tangential direction with the cylinder wall. The modeling results showed that it was possible to eliminate no-flow region(stagnant layer) as shown in the vertical type when an inlet and an outlet were installed on the tangential direction of the cylinder as shown in the tangential type. Also, in the tangential type, vortex-type flow appeared as dominant, and it showed a complicated flow not deviated to one side. When the number of input/output was two, there was no deviated flow, and complicated flows were generated all across the tube. From the test result, it was found that input/output of flow was tangential type and complicated flows with no stagnant layer would be generated when there are two inputs/outputs, respectively.

• Economic and Environmental Geology
• /
• v.57 no.2
• /
• pp.107-117
• /
• 2024

The objective of this study is to estimate riverbed fluctuations and the volume of aggregate extraction attributable to climate change. Rainfall-runoff modeling, utilizing the SWAT model based on climate change scenarios, as well as long-term riverbed fluctuation modeling, employing the HEC-RAS model, were conducted for the Nonsan River basin. The analysis of rainfall-runoff and sediment transport under the SSP5-8.5 scenario for the early part of the future indicates that differences in annual precipitation may exceed 600 mm, resulting in a corresponding variation in the basin's sediment discharge by more than 30,000 tons per year. Additionally, long-term riverbed fluctuation modeling of the lower reaches of the Nonsan Stream has identified a potential aggregate extraction area. It is estimated that aggregate extraction could be feasible within a 2.455 km stretch upstream, approximately 4.6 to 6.9 km from the confluence with the Geum River. These findings suggest that the risk of climate crises, such as extreme rainfall or droughts, could increase due to abnormal weather conditions, and the increase in variability could affect long-term aggregate extraction. Therefore, it is considered important to take into account the impact of climate change in future long-term aggregate extraction planning and policy formulation.

• Economic and Environmental Geology
• /
• v.49 no.4
• /
• pp.269-280
• /
• 2016

I presented three vector crustal magnetic anomaly components and six gradients by using spherical Slepian functions over the cap area of $20^{\circ}$ of radius centered on the South Pole. The Swarm mission, launched by European Space Agency(ESA) in November of 2013, was planned to put three satellites into the low-Earth orbits, two in parallel in East-West direction and one in cross-over of the higher altitude. This orbit configuration will make the gradient measurements possible in North-South direction, vertical direction, as well as E-W direction. The gravity satellites, such as GRACE and GOCE, have already implemented their gradient measurements for recovering the accurate gravity of the Earth and its temporal variation due to mass changes on the subsurface. However, the magnetic gradients have little been applied since Swarm launched. A localized magnetic modeling method is useful in taking an account for a region where data availability was limited or of interest was special. In particular, computation to get the localized solutions is much more efficient and it has an advantage of presenting high frequency anomaly features with numbers of solutions fewer than the global ones. Besides, these localized basis functions that were done by a linear transformation of the spherical harmonic functions, are orthogonal so that they can be used for power spectrum analysis by transforming the global spherical harmonic coefficients. I anticipate in scientific and technical progress in the localized modeling with the gradient measurements from Swarm and here will do discussion on the results of the localized solution to represent the three vector and six gradient anomalies over the Antarctic area from the synthetic data derived from a global solution of the spherical harmonics for the crustal magnetic anomalies of Swarm measurements.