• Journal of the Microelectronics and Packaging Society
• /
• v.4 no.2
• /
• pp.33-40
• /
• 1997

본 연구에서는 에폭시 기지에 충진재료 SiC 분말과 SiC 휘스커 AIN분말을 사용하 여 이들 충진재의 함량 및 형상이 복합재료의 열전도도 열팽창계수 및 유전상수에 미치는 영향을 조사하였다. 복합재료의 열전도도는 세라믹 충진재의부피분율이 증가함에 따라 비선 형적으로 증가하였으며 휘스커 형상의 충진재를 첨가한 복합재료의 열전도도는 구형 분말의 충진재를 사용한 복합재료에 비해 높게 관찰 되었다. 이러한 현상은 충진재로 사용한 휘스 커가 구형 분말 충진재에 비하여 동일 부피분율에서 상호 접촉할수 있는 확률이 높기 때문 인 것으로 추정된다. 열팽창 계수는 충진제의 부피분율이 증가함에 따라 감소 하는 경향을 보였으며 충진재의 형상이 휘스커 형상인 경우가 구형에 비하여 감소되는 정도가 크게 관찰 되었다.

• Korean Chemical Engineering Research
• /
• v.45 no.6
• /
• pp.677-679
• /
• 2007

Nearly monodisperse spherical silica particles, 200~300 nm in diameter, were produced via a dry route for the first time through a two-stage hydrolysis of $SiCl_4$ vapor. In the first stage, the $SiCl_4$ was partially hydrolyzed in a batch reactor at $150^{\circ}C$ to form nearly monodisperse silicon oxychloride particles. In the second stage, the oxychlorides were hydrolyzed further in a tubular reactor to have produced silica with the morphology and size nearly conserved.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.12 no.6
• /
• pp.1312-1319
• /
• 1988

Internal gear is the important part of the planetary reduction gear system. This study aims at developing the numerical analysis method for design of spherical hob to manufacture internal gear. Methods of calculation of hob tooth profile, generating tooth profile and tooth profile errors such as the errors of pressure angle, tooth thickness and pitch of spherical hob must be made smaller than those of standard tooth profile. And, the smaller the pressure angle and the number of equivalent pinion tooth become, the larger the tooth profile errors are. One design example of spherical hob is proposed.

• Bulletin of the Korean Space Science Society
• /
• 2010.04a
• /
• pp.26.2-26.2
• /
• 2010

이 연구는 Ashen light 측정을 통해 전 지구 반사율을 구하는 통합적 광선 추적 모델을 구성하고 그 수치모사 성능을 검증하는데 목적을 두고 있다. 통합적 광선 추적 모델은 태양-지구-달 시스템에 대하여 태양 복사에너지의 광경로를 추적함으로써 최종적으로 저궤도 상에 존재하는 광학계에 도달하는 Ashen light과 moonshine의 조도를 수치 모사하는 기법이다. Ashen light은 구형의 태양에서 출발한 $1.626\times10^{26}W$의 에너지를 가지는 400nm에서 700nm 파장대역의 빛이 램버시안 특성을 지니는 구형의 지구에서 반사된 후 램버시안 특성을 가지는 구형의 달에서 재 반사되어 저궤도상의 광학계로 입사하는 빛이고, moonshine은 달에서 직접 반사되어 저궤도상의 광학계로 입사하는 빛이다. 통합적 광선 추적 수치 모사를 이용하여 구한 Ashen light과 moonshine의 조도는 1차 근사 해석적 방법을 이용한 계산 결과와 측정 오차 범위 이내의 오차를 보였다. 최종 연구 결과 Ashen light과 moonshine의 조도를 이용하여 구한 지구 반사율과 1차 근사 해석적 방법을 이용한 지구 반사율 계산의 결과가 유사함을 증명하였다.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2018.05a
• /
• pp.252-256
• /
• 2018

호우 시 산지하천 유역에서 빈발하는 토석류에 따라 하천 흐름에 들어온 전석과 같이 상대적으로 큰 물체는 하류로 이송되거나 하상에 퇴적하여 기존 흐름과 하상을 변화시키는 교란요인이 된다. 따라서 산지하천 흐름에서 전석의 영향을 예측하는 것이 필요하나 이는 유속, 전석의 크기와 형상, 유입조건, 부유사 농도 등 수 많은 변수들에 영향을 받기 때문에 그 경로를 정확히 예측하기 어렵다. 이 연구는 유리와 철로 된 구형물체가 개수로 흐름에서 이동하는 경로를 조사한 것이며 흐름의 수심, 물체의 크기와 초기침강조건을 고려하여 수리실험을 실시하고 물체의 이동경로와 유하거리를 분석하였다. 개수로 흐름에 유입한 구형 물체는 침강에 의한 항력과 유수에 의한 항력을 동시에 받는다. 이 힘은 물체의 형상, 유수의 점성, 난류, 물체와 물의 밀도차가 복합적으로 작용한 결과이며 구체의 이동경로와 시간을 좌우한다. 실험결과 개수로 흐름에서 낙하중인 구형물체는 하상에 가까워질수록 흐름방향 이동거리가 증가하였다. 물체의 수중무게가 작을수록 유수 중에서 체류하는 시간이 길고 이동거리가 더 크며, 구체에 작용하는 초기항력에 따라 초기 낙하각도와 이동거리가가 증가하는 것을 확인하였다.

• Korean Chemical Engineering Research
• /
• v.51 no.2
• /
• pp.279-284
• /
• 2013

The phenolic beads in macrosize range were obtained by suspension polymerization at $98^{\circ}C$ from phenol and formaldehyde in the presence of basic catalyst with a phenol to formaldehyde (P/F) range of 1:1~1:4, and they were carbonized to spherical carbon beads under nitrogen at $700^{\circ}C$. Thermal analysis on spherical phenolic beads obtained by suspension polymerization showed that the postcuring process is essential. In order to optimize the suspension polymerization, the effects of the P/F molar ratio, the pH of catalyst, and the molecular weight of stabilizer on the size distribution and yield of spherical phenol beads were examined separatively. The particle size was increased whereas the yield was decreased with P/F molar ratio. The increasing basicity of catalyst made the particle size to increase, while the molecular weight of stabilizer had more effect on the yield rather than on the particle size distribution. The thermal stability of the spherical phenolic beads obtained through postcure was also examined by TGA. The phenol beads of high P/F ratio still showed the weight loss at $220^{\circ}C$ even after postcure due to the high possibility of dibenzyl ether, while those of low P/F ratio showed the steady decrease in weight during $220^{\circ}C$ to $400^{\circ}C$, which showed that the optimal P/F ratio was 1:2.

• Journal of the Korean Electrochemical Society
• /
• v.15 no.2
• /
• pp.67-73
• /
• 2012

Spherical lithium manganese oxide spinel, $LiMn_{2-x}M_xO_4$ (M = Al, Mg, B) prepared by wet-milling, spray-drying, and sintering process has been investigated as a cathode material for lithium ion batteries. As-prepared powders exhibit various surface morphologies and internal density in terms of boron (B) doping level. It is found that the dopant B drives the growth of the primary particle and minimizes the surface area of the powder. As a result, the dopant enhances the internal density of the particles. Electrochemical tests demonstrated that the capacity of the synthesized material at 5 C could be maintained up to 90% of that at 0.2 C. The cycle performance of the material showed that the initial capacity was retained up to 80% even after 500 cycles under the high temperature of $60^{\circ}C$.

• Investigative Magnetic Resonance Imaging
• /
• v.15 no.1
• /
• pp.48-56
• /
• 2011

Purpose : The aim of this study is to measure the typical MR variables such as $T_1$- and $T_2$-relaxation times according to morphological characteristics of gold nanopartides as a preliminary study to perform theragnosis using local heating by gold nanopartides. Materials and Methods : Two types of gold nanoparticles were used. Spheres were synthesized by various methods and stirring speed. Rods were synthesized by adding various concentrations of sphere nanopartides. Gold nanopartides were mixed with 2% agarose gel at 1:1 ratio and then signals were acquired using a 1.5T MRI. For the measurements of $T_1$-and $T_2$-relaxation times, TR and TE were varied, respectively. The results were acquired through $T_1$ and $T_2$ curves based on the intensities of MR image using self-developed software. And Statistical analysis was performed. Results : $T_1$ times were measured 1.86 sec and 2.08 sec for sphere and rod, respectively. On the other hands, $T_2$ times were measured 57 ms and 35.45 ms for sphere and rod. Conclusion : The changes of the MR variables according to the morphological characteristics of the gold nanopartides were confirmed. Optimal MR imaging conditions can be obtained by choosing proper TR and TE according to the type of nanoparticles.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.15 no.10
• /
• pp.850-856
• /
• 1990

Generally, the waveguide phase-shifter has been analyzed by the modal expansion method. We can not apply this method in the case which is difficult to choose a nenerating function. In this paper, we are analyzed the rectangular waveguide phase shifter using the perturbation method. When the depth of dielectric slab is smaller then one half of the waveguide height, the experimental results are well agreed with the calculated values by this method.

• Journal of the Korean Society for Precision Engineering
• /
• v.17 no.2
• /
• pp.105-113
• /
• 2000

For exact spherical involute bevel gear, serveral researchers had developed the mathematical models. The solid models of straight bevel gears are obtained and inspected to avoid interference by computer graphics. Furthermore, A gearbox is assembled by spherical involute bevel gears, which are manufactured by CNC machine. The transmission errors in the tooth mesh are measured by Laser sensor, are compared with the AGMA standard. This gearbox is found to be ranked AGMA Q10(JIS 3)