• The Journal of Korean Academy of Prosthodontics
• /
• v.57 no.4
• /
• pp.382-388
• /
• 2019

Increased anterior teeth mastication following posterior teeth loss leads to greater anterior occlusal force. It may cause greater attrition of anterior teeth, traumatic force occlusion (TFO), also often followed by antagonist extrusion and occlusal disharmony. This clinical report describes the treatment for a 67-year-old female patient diagnosed with loss of both maxillary and left mandibular posterior teeth, severe attrition of maxillary and mandibular anterior teeth and extrusion of multiple teeth. A diagnostic cast was mounted on articular in centric relation (CR) position to evaluate vertical dimension (VD) and interspace. To provide adequate space for the prosthetic reconstructions, VD was increased by 3 mm on the anterior pin. And then diagnostic wax-up was completed upon that VD. Wax-up was converted to provisional restorations and verified in the patient's mouth and the final restorations were delivered. Clinical follow up examination held 3 months after temporary restoration owing to changes in vertical dimension revealed proper function in mastication without evidence of temporo-mandibular joint (TMJ) disorders. This clinical report presents successfully restoring severe attrition case with increasing vertical dimension resulting in satisfaction in esthetics and function.

• The korean journal of orthodontics
• /
• v.38 no.6
• /
• pp.376-387
• /
• 2008

Objective: The purpose of this study was to compare the three dimensional changes of tooth movement using four different types of maxillary molar distalization appliances; pendulum appliance (PD), mini-implant supported pendulum appliance (MPD), stainless steel open coil spring (SP) and mini-implant supported stainless steel open coil spring (MSP). Methods: These experiments were performed using the Calorific $machine^{(R)}$ which can simulate dynamic tooth movement. Computed tomography (CT) images of the experimental model were taken before and after tooth movement in 1 mm thicknesses and reconstructed into a three dimensional model using V-works $4.0^{TM}$. These reconstructed images were superimposed using Rapidform $2004^{TM}$ and the direction and amount of tooth movement were measured. Results: The mean reciprocal anchor loss ratio at the first premolar was 17 - 19% for the PD and SP groups. The appliances using mini-implants (MPD or MSP) resulted in less anchorage loss (7 - 8%). On application of a pendulum appliance or MPD, distalization was obtained by tipping rather than by bodily movement. Furthermore, the maxillary second molar tipped distally and bucally. But on application of MSP, distalization was achieved almost by bodily movement. Conclusions: Regarding tooth movement patterns during molar distalization, stainless steel open coil spring with indirect skeletal anchorage was relatively superior to other methods.

• The Journal of Korean Academy of Prosthodontics
• /
• v.55 no.3
• /
• pp.258-263
• /
• 2017

Purpose: In this study, the retrospective radiographic study is executed to evaluate amount of bone loss of various conditions in patients using customized abutment for 4 years of follow-up. Materials and methods: The subjects of this study were implant fixed dental prosthesis using CAD/CAM customized abutments. CAD/CAM customized abutment and fixed dental prosthesis were manufactured by the Prosthodontics Department of Chosun University Dental Hospital from August 1, 2011 to July 31, 2012. Radiological assessments were performed on the patients who were treated by the fixed prosthodontics. After each treatment, a retrospective study was performed for a total of 4 years at 3 months, 6 months, 1 year, 2 years, 3 years, and 4 years. Results: As a result of the study, the customized abutment using CAD/CAM showed less bone loss than the results of existing research. There was no statistically significant differences at alveolar bone loss between splinting group and non-splinting group (respectively 0.27 mm, 0.5 mm). Also, there were statistically significant differences at alveolar bone loss in mx. anterior, mx. posterior, mn. anterior and mn. posterior part (respectively 1.37 mm, 0.39 mm, 0.00 mm, 0.30 mm). Conclusion: The customized abutment using CAD/CAM showed less bone loss than the results of existing research, there were statistically significant differences at alveolar bone loss in implant positions.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.39 no.3
• /
• pp.146-157
• /
• 2023

The bite collapses due to posterior teeth loss or wear results in inadequate space for restoration and esthetic concerns. Increasing the occlusal vertical dimension to improve space deficiency rotates the mandible posteriorly, creating a gap between the maxillary and mandibular anterior teeth, leading to loss of anterior guidance. To solve this problem, the prosthodontics or orthodontics treatments are the commonly used methods for proper anterior guidance. However, it is reasonable to assume that the anterior teeth can naturally relapse to their original position when the occlusal force is eliminated. Therefore, this case report aimed to test whether natural relapse could recover the lost anterior guidance to develop a less invasive and more convenient treatment method. Digital superimposition was used to evaluate the changes in anterior teeth alignment to confirm the change of the recovered anterior guidance. The appropriate indications for this new treatment method were defined and applied clinically.

• The korean journal of orthodontics
• /
• v.32 no.3 s.92
• /
• pp.165-174
• /
• 2002

The purpose of this study was to compare on masse retraction of six anterior teeth with separate canine retraction in the amount of the anchorage loss and the retraction of the anterior teeth. The subjects consisted of 30 adult female patients with Angle Class 1 malocclusions who were treated by .022' straight wire appliance with 4 first permolar extraction. They were composed of two groups. Group 1 consisted of 15 subjects, whose six anterior teeth were retracted by on masse retraction. Group 2 consisted of 15 subjects, whose canines were retracted separately. Pre-treatment and post-treatment lateral cephalometric radiographs were analyzed. All data were processed statistically with independent samples t-test, and the conclusions were as follows. 1. There was no significant difference in the amount of the anchorage loss between two groups(p>0.05). 2. There was no significant difference in the amount of the retraction of the anterior teeth between two groups(p>0.05). 3. There was a significant difference in the amount of the inclinational change of the upper incisors between two groups. It was greater in Group 2. 4. There was a significant difference in the vertical positional change of the upper incisal edges between two groups. The upper incisal edges in Group 2 were more extruded than Group 1 by about 1mm. 5. There was no significant difference in the vertical positional change of the root apex of the upper incisors between two groups(p>0.05). And there was no significant difference in the vertical positional change of the upper molar(p>0.05).

• Journal of Dental Rehabilitation and Applied Science
• /
• v.36 no.4
• /
• pp.232-241
• /
• 2020

Purpose: This study investigated the complications and patterns of implants that confronted with the extruded natural teeth. Materials and Methods: Among patients who received implant treatment between 2006 and 2018 at Chosun University Dental Hospital, only implants that had a maintenance period of at least 5 years and that both implants and confronting natural teeth could be measured and compared on a radiograph were selected. They were divided into two groups. Group 1, experimental group consisted of Implants confronting the extruded natural posterior teeth (n = 167: maxilla (Group 1max) = 92, mandible (Group 1man) = 75) and Group 2, control group consisted of Implants confronting the normal natural posterior teeth (n = 656: maxilla (Group 2max) = 272, mandible (Group 2man) = 384). Results: The incidence of complications between Group 1 and Group 2 was statistically significant. In particular, there was a statistically significant difference between the frequency of marginal bone loss and the amount of marginal bone loss. Conclusion: The extruded natural tooth may cause more frequent complications including bone resorption in the opposing implant.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.33 no.1
• /
• pp.47-54
• /
• 2017

The atrophy of edentulous ridge and pneumatization of the maxillary sinus often limit the volume of bone available for implant placement on maxillary posterior teeth. Most clinicians suffer difficulties from poor bone quality and quantity on maxillary posterior site. Thus, the success of maxillary posterior implant surgery depends on the increase of the available bone and obtaining a good initial stability of the implant after maxillary sinus reconstruction. The maxillary sinus augmentation methods include a crestal approach and a lateral approach. Less morbidity and complications after operation is major advantage to sinus augmentation using crestal approach than lateral approach. However, when the residual ridge height is ${\geq}6mm$, it is known that crestal approach is appropriate. Also delayed implantation after sinus augmentation is recommended in severely atrophic ridge. We present the three cases of implant placement simultaneously sinus augmentation using crestal approach in posterior maxilla site with ${\leq}3mm$ of residual alveolar bone.

• The Journal of Korean Academy of Prosthodontics
• /
• v.54 no.1
• /
• pp.49-56
• /
• 2016

Excessive occlusal wear can result in unacceptable damage to the residual teeth structure, anterior guidance and masticatory function. An 86-year-old man presented with worn dentition and anterior deep bite due to loss of the posterior support. Two implants covered by Korean national health insurance, fixed partial denture and direct composite resin were used to restore the dentition, instead of removable prosthesis. The occlusal vertical dimension was increased by 2 mm in the premolar area and shortened dental arch concept was applied. This treatment was a less expensive alternative to full-mouth rehabilitation with positive esthetic and functional outcomes after 7 months of follow-up.

• The korean journal of orthodontics
• /
• v.40 no.4
• /
• pp.250-259
• /
• 2010

Objective: Intraoral noncompliance upper molar distalization techniques have gained in popularity and have subsequently found to be successful in Class II correction. The aim of the present study was to introduce a screw supported intraoral distalization appliance and investigate its efficiency. Methods: Twenty-one subjects (11 females, 10 males; average age of 14.9 years) with Angle Class II malocclusion participated in this study. Two screws were inserted behind the incisive foramen and immediately loaded to distalize the upper first molars. An intraoral screw supported distalization appliance was used to distalize the upper molars in order to achieve a Class I molar relationship. Skeletal and dental changes were evaluated using cephalometric and three-dimensional (3D) model analysis. Results: Upper molars were distalized 3.95 mm on average and a Class I molar relationship was achieved without any anchorage loss. The upper molars were tipped only $1.49^{\circ}$ and the upper right and left molars were rotated only $0.54^{\circ}$ and $0.74^{\circ}$ respectively which were statistically non-significant (p > 0.05). Conclusions: The newly designed screw supported noncompliance distalization appliance was found to be an effective device for achieving bodily molar distalization without any anchorage loss.

• The Journal of the Korean dental association
• /
• v.38 no.10 s.377
• /
• pp.962-968
• /
• 2000

치조골과 백악질이 치근막에 의하여 경계되어지지 않고 직접 접촉된 상태인 골유착치는 치조골성장장애, 불안전 맹출, 대합치의 정출, 인접치와의 불안정한 관계 등 다양한 문제를 야기한다. 골유착치의 진단은 방사선 사진에서 치근막의 소실, 타진시의 독특한 소리, periotest를 이용한 동요도 검사 등 다양한 방법이 사용되나 그 신뢰성은 높지 않은 편이다. 따라서 저자는 통산적인 방법은 견인을 시행한 후 견인여부를 평가하여 골유착 여부를 판단하는 임상적 진단법을 사용하고 있다. 골유착치의 치료는 subluxation & extrusion법, autotransplantation법, corticotomy법, segmental osteotomy법, ostectomy법등 다양한 방법이 제시되고 있다. Subluxation & extrusion법은 적용이 간편한 장점이 있으나 골유착의 재발로 인한 교정치료의 실패가능성이 높은 단점이 있다. 본 증례는 다수치의 부분맹출 및 골유착으로 인한 구치부 개방교합이 주소인 환자로 소구치는 통산적인 교정치료법으로 골유착된 대구치는 subluxation & extrusion법을 적용하여 양호한 치료 결과를 얻을 수 있었다.